Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your HP Dual Mode Mouse 300. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
Product Overview
The HP Dual Mode Mouse 300 offers versatile connectivity options, allowing you to switch between a 2.4 GHz wireless connection via a USB receiver and a Bluetooth connection. It features adjustable DPI settings for customized tracking speed and two programmable thumb buttons for enhanced navigation.
Key Features:
- Dual Mode Connectivity: Seamlessly switch between 2.4 GHz wireless (USB receiver) and Bluetooth connections.
- Extended Battery Life: Up to 15 months of operation on a single AA battery.
- Customizable DPI: Adjust tracking sensitivity with DPI settings of 1200, 1600, 2400, and 3600.
- Programmable Thumb Buttons: Two side buttons pre-programmed for forward and backward navigation.
- Data Security: Encryption technology protects wireless communication.
Components:
- HP Dual Mode Mouse 300
- USB 2.4 GHz Receiver
- 1 AA Battery (pre-installed or included)
Setup
1. Battery Installation
- Locate the battery compartment cover on the underside of the mouse.
- Slide the cover open.
- Insert the included AA battery, ensuring correct polarity (+/-).
- Close the battery compartment cover until it clicks into place.
Image: Top-down view of the HP Dual Mode Mouse 300, showing the mouse and its USB receiver. The mouse is black with the HP logo, and the receiver is a small, rectangular USB dongle.
2. Connecting via 2.4 GHz Wireless (USB Receiver)
- Remove the USB receiver from its storage slot, usually located inside the battery compartment or near it.
- Plug the USB receiver into an available USB port on your computer.
- The computer should automatically detect and install the necessary drivers.
- Ensure the mouse is powered on and set to 2.4 GHz mode (refer to "Switching Modes" section).
- The mouse is ready for use.
Image: Angled view of the HP Dual Mode Mouse 300, showcasing its ergonomic shape and the HP logo on the palm rest.
3. Connecting via Bluetooth
- Ensure your computer's Bluetooth is enabled.
- Switch the mouse to Bluetooth mode (refer to "Switching Modes" section). The LED indicator on the mouse will typically blink to indicate pairing mode.
- On your computer, go to Bluetooth settings and search for new devices.
- Select "HP Dual Mode Mouse 300" from the list of available devices.
- Follow any on-screen prompts to complete the pairing process.
- The mouse is ready for use.
Operating Instructions
Switching Modes
The HP Dual Mode Mouse 300 allows you to switch between 2.4 GHz wireless and Bluetooth connections. A dedicated button, usually located on the underside or top of the mouse, facilitates this switch. Press the button to toggle between the two modes. An indicator light will typically show the active connection mode.
Adjusting DPI (Tracking Speed)
The mouse features adjustable DPI settings to customize tracking sensitivity. The available DPI settings are 1200, 1600, 2400, and 3600. A DPI switch button, often located near the scroll wheel, allows you to cycle through these settings. Each press will change the DPI, and the mouse's tracking speed will adjust accordingly.
Using Thumb Buttons
The mouse is equipped with two thumb buttons on its left side. By default, these buttons are configured for "Forward" and "Backward" navigation in web browsers and file explorers. These functions can often be customized through your operating system's mouse settings or specific HP software, if available.
Image: Side view of the HP Dual Mode Mouse 300, highlighting the two thumb buttons located on the left side of the mouse.
Maintenance
Battery Replacement
When the mouse's performance degrades or the indicator light signals low battery, replace the AA battery. Follow the "Battery Installation" steps in the Setup section to replace the battery. Dispose of used batteries according to local regulations.
Cleaning
To clean the mouse, use a soft, dry, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution. Avoid using harsh chemicals, abrasive cleaners, or spraying liquids directly onto the mouse. Regularly clean the optical sensor on the underside to ensure accurate tracking.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mouse not responding | Low battery; Incorrect mode selected; USB receiver not connected; Bluetooth not paired. | Replace battery; Switch to correct mode (2.4 GHz or Bluetooth); Ensure USB receiver is securely plugged in; Re-pair Bluetooth connection. |
| Intermittent connection | Interference; Distance from receiver/device; Low battery. | Move mouse closer to receiver/device; Remove obstacles; Replace battery; Avoid using near other wireless devices. |
| Cursor movement is erratic | Dirty optical sensor; Unsuitable surface; Incorrect DPI setting. | Clean the optical sensor; Use on a clean, non-reflective mouse pad; Adjust DPI setting. |
| Thumb buttons not working | Software conflict; Driver issue. | Check operating system mouse settings; Update mouse drivers if available. |
Specifications
- Model: HP Dual Mode Mouse 300 (Model 300)
- Connectivity: 2.4 GHz Wireless (USB Receiver), Bluetooth
- Movement Detection Technology: Optical
- DPI Settings: 1200, 1600, 2400, 3600 (Adjustable)
- Buttons: Left, Right, Scroll Wheel, DPI Switch, 2 Thumb Buttons, Mode Switch
- Power Source: 1 x AA Battery
- Average Battery Life: Up to 15 months
- Item Weight: Approximately 2.46 ounces (70 grams)
- Product Dimensions (LxWxH): Approximately 4.33 x 2.56 x 1.26 inches (110 x 65 x 32 mm)
- Hardware Platform Compatibility: Chromebook, Mac, PC
- Operating System Compatibility: Android OS, Chrome OS, Mac OS 10.X, Windows 10, Windows 8.1
Warranty and Support
For warranty information and technical support, please refer to the documentation included with your product or visit the official HP support website. Keep your proof of purchase for warranty claims.
HP Support Website: support.hp.com