Wildgame Innovations Terra Extreme Trail Camera 12MP 2-Pack

Wildgame Innovations Terra Extreme Trail Camera 12MP User Manual

Model: Terra Extreme 12MP 2-Pack

1. Introduction

The Wildgame Innovations Terra Extreme Trail Camera is designed for efficient and effective digital scouting. This manual provides detailed instructions for setting up, operating, and maintaining your trail camera to ensure optimal performance.

Package Contents

  • 2 x Wildgame Innovations Terra Extreme 12MP Trail Cameras
  • User Manual (this document)
  • Mounting Straps (typically included)
Two Wildgame Innovations Terra Extreme 12MP Trail Cameras

Image 1.1: Two Wildgame Innovations Terra Extreme 12MP Trail Cameras. These cameras are black, rugged, and feature an array of infrared LEDs at the top, a main lens, a motion sensor, and a small display screen at the bottom, showing time and date, and mode indicators (Photos, Image, Still, Video).

2. Setup

2.1 Battery Installation

The Terra Extreme camera requires 8 AA batteries (not included). For best performance, use high-quality alkaline or lithium batteries.

  1. Open the camera housing latch located on the side.
  2. Locate the battery compartment.
  3. Insert 8 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery compartment securely.

2.2 SD Card Installation

A Class 4 or higher SD card (up to 32GB, not included) is required to store images and videos.

  1. With the camera powered off, locate the SD card slot.
  2. Insert the SD card with the metal contacts facing down until it clicks into place.
  3. To remove, press the card in until it springs out.

2.3 Mounting the Camera

Mount the camera to a tree or post using the provided mounting strap. Ensure the camera is stable and pointed towards the desired surveillance area.

  • Thread the strap through the slots on the back of the camera.
  • Securely fasten the strap around the mounting object.
  • Adjust the camera angle as needed.

3. Operating Instructions

3.1 Powering On/Off

To power on the camera, slide the power switch to the "ON" position. The display will illuminate. To power off, slide the switch to "OFF".

3.2 Menu Navigation

Use the navigation buttons (usually UP, DOWN, OK, MENU) to browse and select settings on the LCD screen.

  • MENU: Enters/exits the settings menu.
  • UP/DOWN: Navigates through menu options.
  • OK: Confirms selection or enters a sub-menu.

3.3 Setting Time and Date

It is crucial to set the correct time and date for accurate record-keeping.

  1. Enter the MENU.
  2. Navigate to the "Time/Date" setting.
  3. Use UP/DOWN to adjust values and OK to move to the next field.
  4. Confirm settings to save.

3.4 Photo and Video Modes

The camera supports both still images and video recording.

  • Image Resolution: Select 12MP for highest quality.
  • Video Length: Set video duration (e.g., 30 seconds).
  • Trigger Speed: The camera features a one-second trigger speed. This setting is typically fixed or has limited adjustment.
  • IR Range: The 21-piece high intensity infrared LED array provides an illumination range out to 65 feet. This is an automatic function based on light conditions.

4. Maintenance

4.1 Cleaning

Regular cleaning ensures optimal performance and longevity.

  • Wipe the camera body with a soft, damp cloth.
  • Clean the lens and IR LEDs gently with a lens cleaning cloth to avoid scratches.
  • Ensure no debris obstructs the motion sensor.

4.2 Battery Care and Storage

  • Remove batteries if the camera will not be used for extended periods to prevent leakage.
  • Store the camera in a cool, dry place away from direct sunlight.

5. Troubleshooting

ProblemPossible CauseSolution
Camera not powering onLow or incorrectly installed batteriesReplace batteries, check polarity.
No images/videos capturedSD card full, corrupted, or not inserted; motion sensor blocked; incorrect settingsFormat/replace SD card; clear sensor path; review settings (e.g., sensitivity).
Poor image/video qualityDirty lens; low light; subject too farClean lens; ensure adequate lighting; adjust camera placement.

6. Specifications

  • Model: Terra Extreme 12MP 2-Pack
  • Image Resolution: 12 Megapixels
  • Video Capability: 30-second video
  • Trigger Speed: 1 second
  • IR Illumination: 21-piece high intensity infrared LED array
  • Night Vision Range: Up to 65 feet
  • Power Source: 8 AA batteries (not included)
  • Storage: SD card up to 32GB (Class 4 or higher recommended)
  • Material: Plastic
  • Color: Black
  • Dimensions: Approximately 25.3 x 24.99 x 6.6 cm (Parcel Dimensions)
  • Weight: Approximately 721 g (Item Weight)

7. Warranty and Support

Wildgame Innovations products are designed for durability and performance. For warranty information or technical support, please refer to the official Wildgame Innovations website or contact their customer service directly.

Please retain your proof of purchase for any warranty claims.

For further assistance, visit: Wildgame Innovations Official Website

© 2024 Wildgame Innovations. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.