Keonjinn Oval LED Bathroom Mirror User Manual

Introduction

Thank you for choosing the Keonjinn Oval LED Bathroom Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read it thoroughly before installation and keep it for future reference.

Image: The Keonjinn Oval LED Bathroom Mirror, showcasing its backlit feature and elegant design in a bathroom environment.

Important Safety Information

WARNING:

• Always turn off electricity mains before installation or maintenance.
• Wear safety glasses during installation.
• Installation should be performed by a qualified professional electrician to ensure safety and compliance with local electrical codes.
• Do not attempt to modify the mirror or its electrical components.
• Ensure the mounting surface is structurally sound and can support the weight of the mirror.

Product Features

• Dimmable LED Lighting: Easily adjust brightness from normal to brightest by touching the power switch button for 3 seconds.
• Anti-Fog Function: Separate control for the anti-fog feature, automatically shuts off after one hour for energy saving.
• Memory Function: The mirror retains the last lighting setting when turned off and on again.
• Wall Switch Control Recommended: For energy efficiency, it is recommended to control the mirror light and defogger using a wall switch.
• Durable Construction: Features a silvered reflection layer, copper-free, and environmentally friendly design.
• IP44 Waterproof Rating: Ensures safe operation in wet bathroom environments.
• Long LED Lifetime: Rated for 50,000 hours of use.
• Flexible Installation: Can be mounted horizontally or vertically.
• Two Power Connection Options: Can be powered by plugging into a wall outlet or hardwired to a wall switch.

Image: Overview of the mirror's key features, including dimmable LED, anti-fog, and flexible installation options.

Setup and Installation

The Keonjinn Oval LED Bathroom Mirror utilizes a French Cleat installation system for secure wall mounting. Please follow these steps carefully.

Installation Steps:

1. Drill Holes: Using a positioning ruler, mark and drill holes on the wall. Insert wall anchors into the drilled holes.
2. Screw Brackets: Securely screw the two mounting brackets onto the wall, aligning them with the drilled holes and anchors.
3. Mount Mirror: Carefully place the mirror onto the mounted brackets, ensuring it slots into the correct position and hangs securely.

Image: Step-by-step guide for installing the mirror using the French Cleat system.

Power Connection Options:

Your mirror offers two methods for power connection:

• Plug-in: Connect the mirror directly to a standard wall outlet using the provided plug.
• Hardwired: For a seamless look, the mirror can be hardwired to a wall switch. This should be done by a qualified electrician.

Image: Visual representation of the plug-in and hardwired power connection methods.

Operating Instructions

Dimmable LED Lighting:

To adjust the brightness of the LED lights, simply touch and hold the power switch button on the mirror for approximately 3 seconds. The brightness will cycle from its current level to the brightest setting. Release the button when the desired brightness is achieved. The mirror will remember your last brightness setting for future use.

Image: Instructions for dimming the LED lights and the memory function.

Anti-Fog Function:

The anti-fog function is controlled by a separate switch. Touch the anti-fog switch to activate or deactivate the defogger. For energy efficiency, the anti-fog function will automatically shut off after one hour of continuous operation.

Image: Details about the UL Certified defogging film and its automatic shut-off feature.

Maintenance and Care

• Cleaning the Mirror Surface: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the edges.
• Cleaning the Frame: Wipe the aluminum frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Electrical Components: Ensure the mirror is disconnected from power before cleaning any electrical components. Do not spray water directly onto the mirror's electrical parts.
• Regular Inspection: Periodically check the mounting hardware to ensure the mirror remains securely attached to the wall.

Troubleshooting

Product Specifications

• Brand: Keonjinn
• Model: B0CM9B9QMH
• Shape: Oval
• Product Dimensions: 36"L x 24"W
• Frame Material: Aluminum
• Mirror Material: Glass (5mm Copper-free)
• Mounting Type: Wall Mount (French Cleat)
• Special Features: Dimmable LED, Anti-Fog, Memory Function, IP44 Waterproof, Horizontal/Vertical Installation
• LED Lifetime: 50,000 hours
• Item Weight: 20.3 pounds
• Power Connection: Plug-in or Hardwired
• Certifications: UL Certified Defogging Film, UL International Standard Certification (LED Strip, Anti-fog Film, LED Driver)

Image: UL certifications for key components of the mirror, ensuring safety and quality.

Warranty and Support

Warranty Information:

• 2-Year Warranty: Free repair for the mirror within 2 years of purchase.
• 30-Day No-Hassle Returns: Refer to the seller's return policy for details.
• Free & Hassle-Free Replacement: For damaged products, send photos to receive a free replacement; no return needed.

Image: Overview of warranty and replacement policies.

Customer Support:

For Keonjinn product or order inquiries, follow these steps for support:

1. After locating the product, click on the "Keonjinn" seller name.
2. Select "Ask a question" for the Seller Messaging Assistant.
3. Follow the chat prompts, selecting the most relevant options for your query.
4. A message box will pop up at the end. Type your question and submit.

Image: Guide on how to contact Keonjinn customer support through the Amazon platform.