1. Introduction
This instruction manual provides essential information for the safe and proper operation of your S7 NEMA 14-50P to 4x 5-20R Adapter. This adapter is designed to convert a single 50 Amp NEMA 14-50P 240V outlet into four standard 15/20 Amp 120V household outlets (NEMA 5-20R), allowing you to power multiple standard appliances from a high-power source like a generator or RV hookup. Please read this manual thoroughly before use and retain it for future reference.

Figure 1: S7 NEMA 14-50P to 4x 5-20R Adapter, showing the 4-prong male plug and the four female outlets.
2. Important Safety Information
WARNING: Failure to follow these safety instructions could result in fire, electric shock, serious injury, or death. Always exercise caution when working with electricity.
- Do not exceed the adapter's rated capacity. The adapter converts 240V to 120V, but the total current drawn from the four 120V outlets must not exceed the capacity of the 50 Amp 240V source.
- Ensure proper grounding. This adapter provides grounded connections. Do not defeat the grounding feature.
- Use in dry conditions. While the jacket is durable, avoid exposing the adapter to excessive moisture or water.
- Inspect before use. Before each use, check the adapter for any signs of damage, cuts, or frayed insulation. Do not use if damaged.
- Keep out of reach of children.
- Unplug when not in use. Always disconnect the adapter from the power source when not actively powering devices.
- Consult a qualified electrician if you are unsure about any electrical connections or safety procedures.
3. Product Features
- Versatile 4-Outlet Power: Converts a 50 Amp NEMA 14-50P 240V twist-lock receptacle into four standard 15/20 Amp NEMA 5-20R 120V household outlets.
- Premium 10 AWG Copper Conductors: Constructed with four 10 AWG pure copper cores, rated for 105 °C, ensuring minimal voltage drop and superior conductivity under heavy loads.
- Durable All-Weather Jacket: Encased in a bright orange, 600 V thermoplastic STW jacket, resistant to abrasion, oil, moisture, and UV, suitable for indoor and outdoor use.
- Safe & Code-Compliant: Engineered to UL 817 and UL 62 standards, featuring fully molded NEMA 14-50P plug and 5-15/20R connectors for reliable, grounded connections meeting North American electrical codes.
- Compact & Plug-and-Play: 1.8 ft (0.55m) length provides a balance of reach and portability, requiring no hardwiring.

Figure 2: Close-up of the NEMA 14-50P male plug, illustrating its 4-prong configuration.

Figure 3: Illustration of the adapter's internal 10 AWG copper wire construction and durable insulation.

Figure 4: Visual representation of the adapter's resistance to weather, water, fire, and oil.
Video 1: A short demonstration of the S7 220V to 120V adapter, highlighting its features and connection points.
4. Setup Instructions
- Identify the Power Source: Locate a NEMA 14-50R 50 Amp, 240V outlet. This is typically found on generators, RV pedestals, or dedicated high-power circuits.
- Inspect the Adapter: Before plugging in, visually inspect the S7 adapter for any damage, including cuts, frayed wires, or bent prongs. Do not use if damaged.
- Connect the Adapter: Insert the NEMA 14-50P male plug of the S7 adapter firmly into the 50 Amp, 240V receptacle. Ensure it is fully seated and twisted to lock if applicable.
- Connect 120V Devices: Plug your standard 120V household appliances or tools into the four NEMA 5-20R female outlets on the adapter.
- Verify Power: Once all connections are secure, you can power on your devices.
Note: The adapter distributes the 240V input into two separate 120V lines, each capable of supplying power to the 5-20R outlets. Ensure the total load on all connected 120V devices does not exceed the safe operating limits of the adapter and the source circuit.
5. Operating Instructions
The S7 adapter is designed for straightforward operation. Once connected as per the setup instructions:
- Ensure all connected devices are in good working order and their power requirements do not exceed the adapter's capacity.
- Turn on your devices one by one to avoid sudden power surges.
- Monitor the performance of your devices. If any device malfunctions or the adapter shows signs of overheating, immediately disconnect power.
- When finished, turn off all connected devices before unplugging the adapter from the 240V source.

Figure 5: Diagram illustrating the four NEMA 5-20R household outlets on the adapter.
6. Maintenance
Minimal maintenance is required for the S7 adapter to ensure its longevity and safe operation:
- Cleaning: Disconnect the adapter from all power sources before cleaning. Wipe the exterior with a dry, clean cloth. Do not use liquid cleaners or immerse the adapter in water.
- Storage: Store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures, when not in use. Coil the cable loosely to prevent kinking.
- Regular Inspection: Periodically inspect the cable and connectors for any signs of wear, damage, or corrosion.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to connected devices. |
|
|
| Devices trip circuit breaker. |
|
|
| Adapter feels hot. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | S7 |
| Input Plug Type | NEMA 14-50P (4-prong male) |
| Output Receptacle Type | 4x NEMA 5-20R (household female) |
| Input Voltage | 240V |
| Output Voltage | 120V |
| Rated Current | 50 Amp (Input) |
| Wire Gauge | 10 AWG Pure Copper |
| Cable Length | 1.8 ft (approx. 0.55 meters) |
| Jacket Material | STW Thermoplastic (600V rated) |
| Certifications | UL 817, UL 62 Compliant |
| Item Weight | 1.68 pounds (approx. 0.76 kg) |
| Color | Orange |
9. Warranty and Support
S7 products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official S7 website. Please have your model number (S7) and purchase date available when contacting support.