1. Introduction
Thank you for choosing Heyday Active Noise Cancelling Over-Ear Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones. Please read it thoroughly before use to ensure optimal performance and longevity of your device.
2. Package Contents
- Heyday Active Noise Cancelling Over-Ear Headphones
- USB Charging Cable
- 3.5mm Audio Cable
- Carrying Case
- User Manual
3. Product Overview
Image: Heyday Active Noise Cancelling Over-Ear Headphones shown in their retail packaging, highlighting the over-ear design and included carrying case.
The Heyday Active Noise Cancelling Over-Ear Headphones feature a comfortable design with cushioned earcups and an adjustable headband. They offer both wireless Bluetooth and wired 3.5mm audio connectivity, along with active noise cancellation for an immersive listening experience.
4. Setup
4.1. Charging the Headphones
- Connect the small end of the USB charging cable to the charging port on the headphones.
- Connect the large end of the USB charging cable to a USB power adapter (not included) or a computer's USB port.
- The LED indicator will illuminate during charging and change color or turn off when fully charged.
- A full charge typically takes approximately 2-3 hours.
4.2. Bluetooth Pairing
- Ensure the headphones are charged.
- Press and hold the Power button for approximately 7 seconds until the LED indicator flashes blue and red, indicating pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "Heyday ANC Headphones" from the list of found devices.
- Once paired, the LED indicator will flash blue slowly or turn solid blue.
4.3. Wired Connection
To use the headphones with a wired connection:
- Connect one end of the 3.5mm audio cable to the audio input jack on the headphones.
- Connect the other end of the 3.5mm audio cable to the audio output jack of your device.
- The headphones will function in passive mode (without power) when connected via the 3.5mm cable, but Active Noise Cancellation (ANC) will require power.
5. Operating Instructions
5.1. Power On/Off
- Power On: Press and hold the Power button for approximately 3 seconds until the LED indicator lights up.
- Power Off: Press and hold the Power button for approximately 7 seconds until the LED indicator turns off.
5.2. Active Noise Cancellation (ANC)
- Activate ANC: Press the ANC button once. The ANC indicator light will turn on.
- Deactivate ANC: Press the ANC button once again. The ANC indicator light will turn off.
5.3. Volume Control
- Increase Volume: Press the Volume Up (+) button.
- Decrease Volume: Press the Volume Down (-) button.
5.4. Media Playback
- Play/Pause: Press the Multi-function button once.
- Next Track: Press and hold the Volume Up (+) button.
- Previous Track: Press and hold the Volume Down (-) button.
5.5. Call Management
- Answer/End Call: Press the Multi-function button once.
- Reject Call: Press and hold the Multi-function button for 2 seconds.
6. Maintenance
- Clean the headphones with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the headphones to extreme temperatures, humidity, or direct sunlight.
- Store the headphones in the provided carrying case when not in use to protect them from dust and damage.
- Do not attempt to disassemble or repair the headphones yourself, as this will void the warranty.
7. Troubleshooting
- No Power: Ensure the headphones are fully charged.
- Cannot Pair: Make sure the headphones are in pairing mode (flashing blue and red LED). Ensure Bluetooth is enabled on your device and it is within range. Try restarting both devices.
- No Sound: Check the volume levels on both the headphones and your connected device. Ensure the correct audio output is selected on your device. If using a wired connection, ensure the 3.5mm cable is fully inserted.
- ANC Not Working: Ensure the ANC feature is activated and the headphones have sufficient battery power.
- Poor Sound Quality: Move closer to your Bluetooth device to reduce interference. Try disconnecting and re-pairing the headphones.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | 008070346 |
| Connectivity Technology | Bluetooth 5.0, Wired (3.5 mm Jack) |
| Noise Control | Active Noise Cancellation |
| Ear Placement | Over-Ear |
| Material | Plastic/Synthetic Fabric |
| Control Type | Media Control, Remote |
| Compatible Devices | Cellphones, Laptops, Music Production Equipment, Tablets, Television |
| Water Resistance Level | Not Water Resistant |
| Item Weight | 1.7 pounds |
9. Safety Information
- Do not use the headphones at high volume for extended periods to prevent hearing damage.
- Do not use the headphones in situations where inability to hear ambient sounds could be dangerous (e.g., driving, cycling, walking in traffic).
- Keep the headphones away from water and moisture.
- Dispose of the product responsibly according to local regulations.
10. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Heyday website. Please have your model number (008070346) and proof of purchase ready when contacting support.
