STAR WARS R2-D2 3D Motion Lamp Instruction Manual

1. Introduction

Thank you for purchasing the STAR WARS R2-D2 3D Motion Lamp. This 18-inch mood light is designed to provide a relaxing visual experience with its unique liquid motion. Please read this manual thoroughly before use to ensure safe and proper operation of your product.

2. Important Safety Information

This product is not suitable for children under 10 years old.
This is not a toy and is not intended for use as a night light.
Place the lamp on a stable, level surface to prevent tipping.
Ensure adequate ventilation around the lamp. Do not cover the lamp or place it in an enclosed space.
The lamp's base may become warm during operation. Avoid prolonged direct contact with the base.
Do not operate the lamp if the cord or plug is damaged.
Do not attempt to open or modify the lamp's sealed liquid chamber.
Unplug the lamp from the power outlet before cleaning or replacing the bulb.
Use only the specified bulb type (25-watt R39 E17) for replacement.

3. Package Contents

Verify that all items are present in the package:

1x R2-D2 3D Motion Lamp Unit
1x Power Cord with In-line On/Off Switch
1x 25-watt R39 E17 Bulb (pre-installed)
1x Replacement 25-watt R39 E17 Bulb
1x Instruction Booklet

4. Setup Instructions

Unpack: Carefully remove all components from the packaging.
Placement: Choose a flat, stable, and heat-resistant surface for the lamp. Ensure it is away from direct sunlight, extreme temperatures, and out of reach of children and pets.
Bulb Check: The 25-watt R39 E17 bulb is typically pre-installed. Gently check that it is securely screwed into the socket at the base of the lamp. If replacement is needed, refer to the "Maintenance" section.
Connect Power: Insert the power cord plug into the designated port at the back of the lamp's base.
Plug In: Plug the power adapter into a standard electrical outlet.

A person plugging the R2-D2 motion lamp into a power outlet. — Figure 1: Connecting the power cord to the R2-D2 Motion Lamp.

5. Operating Instructions

Turn On: Locate the in-line On/Off switch on the power cord. Flip the switch to the "On" position.
Initial Warm-up: The lamp requires a warm-up period for the motion effect to begin. This can take anywhere from 1 to 3 hours, depending on room temperature. During this time, the liquid will heat up, and the blue globules will start to flow.
Enjoy: Once the motion begins, enjoy the relaxing visual display of the R2-D2 Motion Lamp.
Turn Off: To turn off the lamp, simply flip the in-line On/Off switch on the power cord to the "Off" position.

The R2-D2 motion lamp illuminated with blue liquid motion in a dimly lit room. — Figure 2: R2-D2 Motion Lamp in operation, showcasing the liquid motion.

6. Maintenance

Cleaning: Ensure the lamp is unplugged and completely cool before cleaning. Wipe the exterior surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Bulb Replacement:
1. Unplug the lamp from the power outlet.
2. Carefully remove the glass globe by gently twisting and lifting it from the base.
3. Unscrew the old 25-watt R39 E17 bulb from the socket.
4. Screw in the new 25-watt R39 E17 bulb. Do not overtighten.
5. Carefully place the glass globe back onto the base, ensuring it is seated properly.
6. Plug the lamp back into the power outlet.

7. Troubleshooting

Problem	Possible Cause	Solution
Lamp does not turn on.	No power, faulty bulb, or faulty switch.	Check if the power cord is securely plugged into the outlet and the lamp. Ensure the in-line switch is in the "On" position. Replace the bulb if it is burnt out.
No motion or slow motion.	Insufficient warm-up time, incorrect room temperature, or faulty bulb.	Allow 1-3 hours for the lamp to fully warm up. Ensure the room temperature is between 68-75°F (20-24°C). Verify the correct 25-watt R39 E17 bulb is installed and functioning.
Liquid is cloudy.	Overheating or improper storage.	Turn off the lamp and allow it to cool completely. Ensure the lamp is not exposed to direct sunlight or extreme heat. If cloudiness persists, contact customer support.
Base is excessively hot.	Normal operation, but could indicate an issue if extreme.	It is normal for the base to be warm. If the base feels dangerously hot to the touch, immediately unplug the lamp and discontinue use. Contact customer support.

8. Specifications

Brand: STAR WARS
Model Number: 886388135820
Dimensions: 11.6 x 4.7 x 18.2 inches (29.5 x 11.9 x 46.2 cm)
Item Weight: 1.36 pounds (0.62 kg)
Material: Glass
Power Source: Plug-in Electric
Voltage: 230 Volts (Note: Product description states 230V, but US products typically use 120V. Verify local voltage compatibility.)
Wattage: 25 watts
Bulb Base: E17
Light Source Type: Incandescent
Control Method: Touch (via in-line switch)
Indoor/Outdoor Usage: Indoor
Manufacturer: Robe Factory LLC
UPC: 886388135820

9. Warranty and Support

This appliance typically comes with a 90-day warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support or customer service, please contact the manufacturer at support@ukonic.com.

	DIY Star Wars Beer Tap Handles: Darth Vader & R2-D2 Custom Craft A step-by-step guide to creating custom Star Wars-themed beer tap handles featuring Darth Vader and R2-D2, using MDF, CNC carving, and detailed painting techniques.
	Star Wars Unlimited: Reglas Completas Reglamento completo del juego de cartas coleccionables Star Wars: Unlimited, detallando todas las reglas, mecánicas, y estructura de juego para una experiencia profunda.
	Star Wars Waffle Maker WM5-SRW-DVST: Operating, Safety, and Recipe Guide Comprehensive guide for the Star Wars Waffle Maker WM5-SRW-DVST, covering operating instructions, important safety information, care and maintenance, and a Belgian waffle recipe. Includes definitions of safety alert symbols and tips for optimal waffle making.
	Star Wars Sith Holocron Series 2 User Guide Instructions and information for the Star Wars Sith Holocron Series 2, including activation, crystal insertion, and connecting with other holocrons.
	Star Wars Yoda Animated Figure Assembly and Operation Instructions Official assembly and operation instructions for the Star Wars Yoda animated figure (Model 4124175). Includes parts list, step-by-step assembly guide, operation modes, warnings, and care instructions.
	Star Wars 6 Ft Animated Stormtrooper: Use, Care, and Assembly Guide Comprehensive guide for the Star Wars 6 Ft Animated Stormtrooper (Model 24SV24407), including parts list, assembly instructions, operation modes, warnings, and care tips. Features Halloween and Christmas accessory options.

STAR WARS 886388135820