1. Introduction
Thank you for choosing the Yaheetech Adjustable Swivel Bar Stools with Backrest. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.
These modern bar stools are designed for comfort and versatility, featuring an adjustable height mechanism, 360-degree swivel function, and a supportive backrest. The durable PU leather upholstery and sturdy metal base ensure both style and stability for various settings, including kitchen islands, dining rooms, and home bars.
Image 1.1: Two Yaheetech Adjustable Swivel Bar Stools with Backrest.
2. Safety Information
WARNING: This product can expose you to chemical Di(2-ethylhexyl)phthalate (DEHP) and Lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture.
- Always ensure all components are securely fastened before use.
- Do not stand on the stool.
- Do not exceed the maximum weight capacity of 330 pounds (150 kg).
- Keep children away from the assembly area. Small parts may pose a choking hazard.
- Use on a flat, stable surface to prevent tipping.
- Avoid sudden movements or leaning excessively while seated.
3. Package Contents
Please verify that all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact customer service.
- Seat Cushion with Backrest (2)
- Gas Lift Cylinder (2)
- Base Plate (2)
- Footrest Ring (2)
- Gas Lift Cover (2)
- Mounting Plate (2)
- Hardware Pack (Screws, Washers, Allen Wrench)
4. Assembly Instructions
Assembly is designed to be straightforward and typically takes less than 10 minutes per chair. Follow these steps carefully:
- Attach Mounting Plate to Seat: Align the mounting plate with the pre-drilled holes on the underside of the seat cushion. Secure it using the provided screws and Allen wrench. Ensure it is tightened firmly.
- Insert Gas Lift into Base: Place the large base plate on a flat surface. Insert the gas lift cylinder into the center hole of the base plate.
- Add Gas Lift Cover and Footrest: Slide the gas lift cover over the gas lift cylinder. Then, slide the footrest ring over the gas lift cylinder, resting it on the designated groove or support.
- Connect Seat to Gas Lift: Carefully place the assembled seat (with mounting plate) onto the top of the gas lift cylinder. The conical end of the gas lift should fit securely into the hole of the mounting plate. Apply gentle downward pressure to ensure it is seated properly.
Image 4.1: Components including gas lift, base, and footrest.
Repeat these steps for the second bar stool.
5. Operating Instructions
- Height Adjustment: To raise the seat, lift the lever located under the seat while standing. The seat will rise automatically. To lower the seat, lift the lever while seated, and the seat will descend. Release the lever at your desired height. The adjustable height range is 25 to 33.3 inches.
- Swivel Function: The seat is designed to swivel 360 degrees, allowing for easy movement and interaction without needing to reposition the entire stool.
- Footrest: Utilize the built-in half-round footrest for added comfort and support, especially during extended periods of sitting.
Image 5.1: User demonstrating the adjustable height and comfortable seating.
6. Maintenance
- Cleaning: The water-resistant PU leather surface is easy to clean. Simply wipe it with a damp cloth and a few drops of mild cleanser. Avoid abrasive cleaners or harsh chemicals that could damage the material.
- Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain stability and safety.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the PU leather to fade or crack over time. Position the stools away from direct sunlight when possible.
- Weight Distribution: Distribute weight evenly on the seat to prevent undue stress on the components.
Image 6.1: Features of the PU leather and foam cushion, highlighting ease of cleaning.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool is wobbly or unstable. | Loose screws or uneven floor. | Check and tighten all assembly screws. Ensure the stool is on a flat, level surface. |
| Height adjustment not working. | Gas lift lever not fully engaged or gas lift cylinder faulty. | Ensure the lever is pulled completely. If the issue persists, the gas lift cylinder may need replacement. Contact customer support. |
| Squeaking noise during swivel or adjustment. | Lack of lubrication or loose components. | Apply a small amount of silicone-based lubricant to moving parts. Check and tighten all connections. |
8. Specifications
| Brand | Yaheetech |
| Model Number | YT9t810001001 |
| Color | Grey |
| Quantity | 2 |
| Product Dimensions (Overall) | 19.5"D x 17"W x 36.5"H (49.5 cm D x 43.2 cm W x 92.7 cm H) |
| Adjustable Seat Height | 25" - 33.3" (63.5 cm - 84.6 cm) |
| Seat Width | 17" (43.2 cm) |
| Seat Depth | 15" (38.1 cm) |
| Backrest Height | 14.6" (37.1 cm) |
| Base Diameter | 16.1" (40.9 cm) |
| Maximum Weight Capacity | 330 lbs (150 kg) |
| Materials | PU Leather, Foam, Plywood, Electroplated Steel |
| Item Weight (per stool) | 16.6 lbs (7.5 kg) |
| Assembly Required | Yes |
| Product Care Instructions | Wipe with Damp Cloth |
Image 8.1: Detailed product dimensions.
Image 8.2: Illustration of the large metal base for enhanced stability.
9. Warranty and Support
Yaheetech is committed to providing high-quality products. For any questions regarding assembly, missing parts, product defects, or general inquiries, please contact Yaheetech customer service. Please have your model number (YT9t810001001) and purchase information ready when contacting support.
For more information and support, please visit the official Yaheetech store: Yaheetech Store.
