1. Introduction
This manual provides instructions for the OttLite Entice LED Desk Lamp with Wireless Charger & USB. This lamp features OttLite's ClearSun LED technology, adjustable brightness and color temperatures, a foldable arm, and integrated wireless and USB charging capabilities. Please read this manual thoroughly before use and retain it for future reference.
Figure 1.1: OttLite Entice LED Desk Lamp Overview. The image displays the lamp in its extended position, with a smartphone placed on the base for wireless charging. The lamp is white with a silver-colored light bar.
2. Important Safety Instructions
To reduce the risk of fire, electric shock, or injury to persons, please observe the following:
- Do not use with an extension cord unless the plug can be fully inserted.
- Do not alter the plug.
- Unplug the lamp from the power outlet before cleaning.
- Do not operate the lamp near water.
- This lamp is for indoor use only.
- Do not attempt to disassemble the lamp. There are no user-serviceable parts inside.
- Keep the wireless charging pad clear of metal objects, credit cards, or other items that could interfere with charging or cause overheating.
3. Package Contents
Verify that all components are present in the package:
- OttLite Entice LED Desk Lamp (Model: CSDQA02W-SHPR)
- Power Cable
4. Setup Guide
4.1 Unpacking
- Carefully remove all components from the packaging.
- Remove any protective films or ties.
4.2 Placement
Place the lamp on a stable, flat surface. Ensure there is adequate space around the base for wireless charging and access to the USB port.
4.3 Power Connection
- Insert the power cable into the power input port located at the back of the lamp base.
- Plug the other end of the power cable into a standard 120V AC wall outlet.
4.4 Adjusting the Lamp
The lamp features a foldable arm and shade for precise light placement and compact storage. The height can be adjusted from 11 to 22 inches.
Figure 4.1: Lamp Features and Adjustments. This diagram shows the lamp's adjustable height (11" to 22"), 3 color modes, wireless charging pad, USB charging port, and touch-sensitive controls on the base.
5. Operating Instructions
The lamp is controlled via touch-sensitive buttons located on the base.
5.1 Power On/Off
- To turn the lamp ON or OFF, touch the Power button () on the base.
5.2 Adjusting Brightness
- With the lamp on, repeatedly touch the Brightness Up button () to increase brightness.
- Repeatedly touch the Brightness Down button () to decrease brightness.
- There are 5 brightness levels available for each color temperature mode.
5.3 Adjusting Color Temperature
- With the lamp on, touch the Mode button () to cycle through the three color temperature modes: Warm, Bright, and ClearSun Daylight.
5.4 Wireless Charging
The lamp base includes a Qi-certified wireless charging pad.
- Place your Qi-enabled device (e.g., smartphone) face up on the wireless charging pad located on the lamp base.
- Ensure the device is centered on the charging pad for optimal charging.
- A charging indicator on your device will confirm that charging has begun.
Figure 5.1: Wireless Charging in Use. A smartphone is shown placed on the lamp's base, indicating active wireless charging.
5.5 USB Charging
A 5V, 2.1A USB port is located on the back of the lamp base for charging additional devices.
- Connect your device's USB charging cable to the USB port on the lamp base.
- Connect the other end of the cable to your device to begin charging.
Figure 5.2: USB Charging Port. A hand is shown connecting a USB cable to the USB port located on the rear of the lamp's base.
6. Maintenance
6.1 Cleaning
- Ensure the lamp is unplugged from the power source before cleaning.
- Wipe the lamp with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.
6.2 LED Light Source
The LED light source in this lamp is designed for long-term use and is not replaceable. Do not attempt to replace the LEDs.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power connection. | Ensure the power cable is securely plugged into the lamp and the wall outlet. |
| Wireless charging is not working. | Device not Qi-enabled or not properly aligned. | Verify your device supports Qi wireless charging. Reposition the device on the charging pad to ensure proper alignment. Remove any thick cases or metal objects. |
| USB charging is not working. | USB cable issue or device not compatible. | Try a different USB cable. Ensure the device is compatible with 5V, 2.1A USB charging. |
| Light flickers or is dim. | Power supply issue. | Ensure the lamp is connected directly to a wall outlet, not an overloaded extension cord. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | CSDQA02W-SHPR |
| Brand | OttLite |
| Light Source Type | LED (ClearSun Technology) |
| Wattage | 8 watts |
| Brightness | 424 Lumen |
| Color Temperature | 3 Modes (Warm, Bright, ClearSun Daylight) |
| Color Rendering Index (CRI) | 95+ |
| Control Method | Touch |
| Wireless Charging Output | Qi-certified |
| USB Charging Output | 5V, 2.1A |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Product Dimensions (Extended) | 9"D x 7"W x 19"H |
| Item Weight | 1.58 Pounds |
| Material | Metal, Plastic |
| Indoor/Outdoor Usage | Indoor |
9. Warranty and Support
9.1 Warranty Information
Specific warranty details for your OttLite Entice LED Desk Lamp are typically included with the product packaging or can be found on the official OttLite website. Please refer to these resources for information regarding warranty coverage and terms.
9.2 Customer Support
For technical assistance, replacement parts, or further inquiries, please contact OttLite customer support. Contact information can usually be found on the OttLite website or in the product packaging.
You may also visit the OttLite Store on Amazon for additional product information and support resources.
