Accutime PJM40998AZ

Accutime PJ Masks Kids' Spinner Digital Timepiece (Model PJM4098AZ) Instruction Manual

Your guide to setting up, operating, and maintaining your digital timepiece.

Introduction

Thank you for choosing the Accutime PJ Masks Kids' Spinner Digital Timepiece. This manual provides essential information for the proper use and care of your new digital watch. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

This timepiece features a digital clock display integrated into a fun spinner design, showcasing popular PJ Masks characters. It is designed for children aged 6 years and up.

Product Overview

Accutime PJ Masks Kids' Spinner Digital Timepiece showing the digital display and character details.

Figure 1: Accutime PJ Masks Kids' Spinner Digital Timepiece. This image displays the blue, three-pronged spinner with a central digital clock featuring PJ Masks characters. Each prong tip also shows a character emblem.

The Accutime PJ Masks Kids' Spinner Digital Timepiece combines a functional digital watch with an engaging spinner toy. The central display shows the time, while the spinner features character details for interactive play.

Setup

Setting the Time

Your digital timepiece may require time adjustment upon first use or after a battery change. Follow these steps to set the time:

  1. Locate the small button on the side or back of the digital display unit. This button is typically recessed to prevent accidental changes.
  2. Use a pointed object, such as a pen tip or a straightened paper clip, to press and hold the button.
  3. The hour digit will begin to flash. Press the button repeatedly to advance the hour. Ensure you set the correct AM/PM if applicable (though typically these simple digital watches cycle through 24 hours).
  4. Once the hour is set, press and hold the button again until the minute digit begins to flash.
  5. Press the button repeatedly to advance the minute.
  6. After setting the minutes, press and hold the button one last time to confirm and exit the setting mode. The time will now be set.

If the display does not respond, ensure the battery is correctly installed and has sufficient power.

Operating the Spinner

The spinner feature is integrated into the timepiece's design for entertainment. To operate:

  • Hold the central part of the timepiece firmly between your thumb and forefinger.
  • Use your other hand to flick one of the outer prongs.
  • The timepiece will spin rapidly. The round corners and smooth surface ensure comfortable handling during use.

Ensure the spinner is used in an open area to avoid striking objects or people.

Maintenance

Cleaning

To clean your timepiece, gently wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials, as these can damage the plastic surface and digital display.

Water Resistance

Important: This timepiece is NOT water resistant.

Avoid exposing the product to water, moisture, rain, or any liquids. Water exposure can cause permanent damage to the internal electronic components and void any implied warranty.

Battery Replacement

Information regarding battery type and replacement procedure is not provided in the product specifications. If the digital display becomes dim or stops working, it indicates a low battery. Battery replacement should ideally be performed by a qualified technician or an adult with experience in small electronics to avoid damaging the unit. Typically, these devices use small button-cell batteries.

Troubleshooting

  • Display is blank or dim:

    This usually indicates a low or depleted battery. Refer to the "Battery Replacement" section under Maintenance. Ensure the battery is correctly installed.

  • Time is incorrect:

    The time may need to be reset. Follow the "Setting the Time" instructions in the Setup section. Accidental button presses can sometimes alter the time.

  • Spinner does not spin smoothly:

    Check for any debris or foreign objects lodged in the spinner mechanism. Gently clean the area. Avoid applying excessive force, which could damage the bearings.

Specifications

Model NumberPJM40998AZ
BrandAccutime
MaterialPlastic
Recommended Age6 years and up
Water ResistanceNot water resistant
Package Dimensions6.46 x 4.41 x 1.1 inches
Item Weight3 ounces
First AvailableOctober 30, 2020
ManufacturerAccutime Watch Corp.

Safety Information

  • This product contains small parts and is recommended for children aged 6 years and up. Adult supervision is advised for younger children.
  • Do not expose the timepiece to extreme temperatures, direct sunlight for prolonged periods, or strong magnetic fields.
  • As the product is not water resistant, keep it away from water, showers, baths, and swimming pools.
  • Avoid dropping or subjecting the timepiece to severe impacts, which could damage the internal components or the plastic casing.

Warranty and Support

For information regarding warranty coverage or product support, please refer to the packaging or contact Accutime customer service directly. Contact details are typically available on the manufacturer's website or product documentation.

You can visit the Accutime Store on Amazon for more information about the brand and other products.

© 2023 Accutime Watch Corp. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.