HyperGear Fabrix2 Bluetooth Portable Speaker User Manual

Introduction

This manual provides essential information for the safe and efficient operation of your HyperGear Fabrix2 Bluetooth Portable Speaker. Please read this manual thoroughly before using the device and retain it for future reference.

Image: Front view of the HyperGear Fabrix2 Bluetooth Portable Speaker, highlighting its fabric and wood grain design.

What's in the Box

Verify that all items are present in the package:

• HyperGear Fabrix2 Bluetooth Portable Speaker
• Micro USB Charging Cable
• 3.5mm Stereo Auxiliary Cable

Key Features

• Immersive HD Sound: 8W output for clear highs and deep bass.
• Hands-Free Calling: Built-in microphone for convenient call management.
• Sleek & Travel-Ready Design: Stylish fabric and wood grain finish, compact for portability.
• Versatile Music Streaming: Multiple connectivity options including Bluetooth, Aux-in, Micro SD, and USB.
• Long-Lasting Playtime: Up to 5 hours of continuous playback on a single charge.

Image: Visual representation of the speaker's key features, including powerful sound, built-in microphone, extended battery life, and hands-free calling.

Setup

Charging the Speaker

Before first use, fully charge the speaker. Connect the Micro USB Charging Cable to the speaker's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will illuminate during charging and turn off when fully charged. A full charge takes approximately 4 hours.

Powering On/Off

Press and hold the Power button located on the top panel to turn the speaker on or off.

Image: Top panel of the speaker displaying the control buttons for power, mode, volume, and track navigation, along with the microphone.

Operating Instructions

Bluetooth Pairing

1. Ensure the speaker is powered on and in Bluetooth pairing mode (indicated by a flashing LED).
2. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
3. Select "HyperGear Fabrix2" from the list of devices.
4. Once paired, the speaker will confirm with an audible prompt, and the LED will stop flashing.

Using Auxiliary Input (AUX)

Connect one end of the 3.5mm Stereo Auxiliary Cable to the AUX port on the speaker and the other end to the audio output of your device. The speaker will automatically switch to AUX mode.

Playing from Micro SD Card / USB Drive

Insert a Micro SD card or USB drive containing audio files into the respective port on the speaker. The speaker will automatically detect and begin playing music from the inserted media. Use the 'M' (Mode) button to switch between input sources.

Image: Rear view of the speaker, highlighting the various connectivity ports: Micro USB for charging, AUX-in, Micro SD card slot, and USB port.

Controlling Playback and Volume

• Play/Pause: Press the Play/Pause button.
• Volume Up/Down: Press the '+' or '-' buttons.
• Next/Previous Track: Press and hold the '+' or '-' buttons.
• Answer/End Call: Press the Play/Pause button during an incoming call.
• Reject Call: Press and hold the Play/Pause button during an incoming call.

Maintenance

• Keep the speaker away from extreme temperatures, direct sunlight, and moisture.
• Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Store the speaker in a cool, dry place when not in use for extended periods.

Troubleshooting

Specifications

Warranty & Support

The HyperGear Fabrix2 Bluetooth Portable Speaker comes with a Limited Warranty. For detailed warranty information and support, please visit the official HyperGear website or contact their customer service. Keep your purchase receipt for warranty claims.

For further assistance, you may visit the HyperGear Store on Amazon.