Dogtra Edge Electronic Dog Training Collar User Manual

Introduction

The Dogtra Edge Electronic Dog Training Collar is designed for effective and humane training of large and medium dogs weighing 35+ lbs. This system offers advanced features for precise control, including a 1-mile range, vibration, and 127 stimulation levels. It is waterproof and expandable for up to 4 dogs, making it suitable for various training scenarios including hunting, field training, and professional K9 work.

Image: The Dogtra Edge system, showing the remote transmitter, receiver collar, and packaging.

Key Features:

• Up to a 1-mile range for extensive coverage.
• Effective, humane, and safe training modes: Nick (quick 1/2-second), Constant (up to 12 seconds) stimulation, and Pager Vibration.
• Two stimulation level dials: a smooth 0-127 stimulation levels dial for precise control and an intuitive 1-8 correction level selection dial for faster adjustments.
• One-handed operation with a tube-shaped remote.
• Fully waterproof design for both transmitter and receiver.
• 2-hour rapid charge batteries for quick readiness.
• Expandable to a 4-dog system with additional receivers.
• Equipped with a clear LED locator light on the receiver.

Image: A visual summary of the Dogtra Edge's key features, including 1-mile range, waterproof design, high output, LED locate lights, Nick/Constant stimulation, Pager Vibration, interchangeable stimulation dial, suitability for dogs 35+ lbs, and expandability to a 4-dog system.

Package Contents

Upon opening your Dogtra Edge package, you should find the following components:

• Receiver Collar
• Remote Transmitter
• Battery Charger
• Splitter Cable
• Belt Clip
• Test Light
• Interchangeable Selector Dial
• Contact Points (5/8 in. and 3/4 in.)
• Adjustment Tool
• User Manual (this document)
• PetsTEK Clicker

Image: The Dogtra Edge remote transmitter and receiver collar, ready for use.

Setup

1. Charging the Batteries:

Before initial use, fully charge both the remote transmitter and the receiver collar. Connect the splitter cable to the charger and then to the charging ports on both devices. A full charge typically takes 2 hours. The LED indicator on the devices will change color to indicate charging status (e.g., red for charging, green for fully charged).

2. Attaching the Contact Points:

Select the appropriate contact points (5/8 in. or 3/4 in.) based on your dog's coat length. Longer contact points are generally needed for dogs with thicker coats to ensure proper skin contact. Use the provided adjustment tool to securely screw the contact points onto the receiver.

3. Fitting the Collar:

Proper collar fit is crucial for effective and safe operation. The receiver should be positioned on the underside of your dog's neck, directly below the windpipe. The contact points must make consistent contact with the dog's skin. You should be able to fit two fingers snugly between the collar strap and your dog's neck. A loose fit can lead to inconsistent stimulation and skin irritation.

Image: Close-up of the Dogtra Edge receiver collar, showing the contact points and strap.

4. Pairing (if necessary):

The Dogtra Edge system typically comes pre-paired. If you are adding additional receiver collars (up to 4 dogs total), follow the pairing instructions in the full manual to link each receiver to a specific colored button on the remote transmitter.

Operating Instructions

Remote Transmitter Overview:

Image: A detailed diagram of the Dogtra Edge remote transmitter, highlighting the Mode Selection Dial, Rheostat Dial & Selector/Step Intensity Dial, 1-Mile Range, and individual buttons for 1-Dog, 2-Dog, 3-Dog, and 4-Dog control.

• Mode Selection Dial: Located at the top, this dial allows you to switch between Nick, Constant, Pager Vibration, and Locator Light options.
• Level Selector Dial: Two interchangeable options are provided:
  • Smooth Dial (0-127 levels): For precise adjustment of stimulation intensity.
  • Instant Dial (0-8 levels): For quick adjustments, ideal for working dogs.
• Colored Buttons: Each button (orange, green, blue, etc.) can be assigned to a specific dog's receiver collar, allowing individual control in multi-dog setups.
• LCD Screen: Displays current stimulation level and battery status.

Training Modes:

• Nick Stimulation: Delivers a single, quick (1/2-second) pulse of stimulation. Useful for immediate correction.
• Constant Stimulation: Delivers continuous stimulation for up to 12 seconds, or until the button is released. Use for more persistent corrections or to reinforce commands.
• Pager Vibration: Provides a non-stimulating vibration. Ideal for warning or attention-getting, especially for sensitive dogs or as an initial cue.
• Locator Light: Activates an LED light on the receiver collar, useful for locating your dog in low-light conditions.

Using the System:

1. Turn On/Off: Press and hold the power button on both the transmitter and receiver until the LED indicator lights up. To turn off, repeat the process.
2. Select Dog (Multi-Dog System): If using multiple collars, press the corresponding colored button on the remote to select the dog you wish to train.
3. Choose Mode: Rotate the Mode Selection Dial to select Nick, Constant, Pager, or Locator Light.
4. Adjust Level: Rotate the Level Selector Dial to set the desired stimulation intensity. Start at the lowest level and gradually increase until your dog responds with a slight ear twitch or head turn, indicating they feel the stimulation without distress.
5. Deliver Correction: Press the appropriate colored button on the remote to deliver the selected mode (Nick, Constant, Pager).

Image: A black dog wearing the Dogtra Edge collar, looking attentively during a training session in an outdoor setting.

Maintenance

• Cleaning: Regularly clean the receiver collar and remote transmitter with a damp cloth. Avoid harsh chemicals. Ensure contact points are free of debris.
• Contact Point Inspection: Periodically check the contact points for wear and tear. Replace if damaged. Ensure they are always securely fastened.
• Battery Care: For optimal battery life, avoid fully discharging the units frequently. Store in a cool, dry place when not in use.
• Strap Maintenance: Inspect the collar strap for signs of wear. Replace if it becomes frayed or damaged to ensure secure fit.
• Waterproof Integrity: While the units are waterproof, always ensure charging port covers are securely closed before exposing to water.

Troubleshooting

Specifications

• Model: AA
• Range: Up to 1 mile
• Stimulation Levels: 0-127 (smooth dial), 0-8 (instant dial)
• Training Modes: Nick, Constant, Pager Vibration, Locator Light
• Expandability: Up to 4 dogs
• Waterproof: Yes (transmitter and receiver)
• Battery Type: Lithium Polymer (included)
• Charge Time: 2 hours (rapid charge)
• Recommended Dog Weight: 35+ lbs
• Recommended Neck Circumference: 12-23 inches
• Item Weight: Approximately 3.54 pounds (entire package)
• Manufacturer: Dogtra
• Color: Black

Image: An illustration demonstrating the 1-mile range capability of the Dogtra Edge system between the remote and the dog's collar.

Warranty and Support

The Dogtra Edge Electronic Dog Training Collar comes with a 2-year warranty. Dogtra also offers a 30-day full product return policy. For any questions, technical assistance, or warranty claims, please contact Dogtra's USA-based customer service. Contact information can typically be found on the Dogtra website or within the product packaging.

For further assistance, visit the official Dogtra website or refer to the contact details provided in your product's original documentation.