Artemide Yanzi Table Lamp (Model USC-1101010A) Instruction Manual

1. Introduction

The Artemide Yanzi Table Lamp is a decorative lighting fixture designed to provide elegant illumination for modern interiors. This manual provides essential information for the safe and proper setup, operation, and maintenance of your Yanzi Table Lamp.

Figure 1: The Artemide Yanzi Table Lamp. This image displays the Artemide Yanzi Table Lamp. It features a spherical, opaque white glass diffuser resting on a slender, angled brass-colored arm. The arm is supported by a dark, horizontal base. A power cord is visible extending from the back.

2. Components

The Artemide Yanzi Table Lamp consists of the following primary components:

• Brass Structure: The main body and arm of the lamp, providing structural support and aesthetic appeal.
• Blown Glass Diffuser: A spherical, opaque glass element that houses the LED light source and diffuses light evenly.
• Integrated LED Light Source: An energy-efficient light-emitting diode system.
• Microswitch Dimmer: An integrated control for adjusting light intensity.
• Power Cord: For connecting the lamp to an electrical outlet.

3. Setup and Installation

The Yanzi Table Lamp is designed for tabletop installation and requires minimal setup.

1. Unpack: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
2. Placement: Position the lamp on a stable, flat surface in your desired location, such as a table in a bedroom, living room, or office. Ensure the surface can support the lamp's weight and that there is adequate space around it.
3. Power Connection: Plug the power cord into a standard 120V electrical outlet.
4. Inspection: Before operation, visually inspect the lamp for any signs of damage that may have occurred during shipping. If damage is found, do not proceed with operation and contact customer support.

4. Operating Instructions

The Yanzi Table Lamp features an integrated microswitch dimmer for light control.

• Turning On/Off: Locate the microswitch dimmer on the lamp's base or arm. A single press will typically turn the lamp on or off.
• Dimming: To adjust the brightness, press and hold the microswitch dimmer. The light intensity will gradually increase or decrease. Release the switch when the desired brightness level is reached.

The lamp utilizes an LED light source, which is not user-replaceable. Do not attempt to open the light source housing.

5. Care and Maintenance

Proper care will ensure the longevity and appearance of your Artemide Yanzi Table Lamp.

• Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to gently wipe the brass structure and glass diffuser. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Handling: Handle the lamp with care, especially the glass diffuser, to prevent breakage.
• Environment: Do not expose the lamp to excessive moisture or extreme temperatures. This lamp is not waterproof.

6. Troubleshooting

If you encounter issues with your Yanzi Table Lamp, refer to the following common solutions:

• Lamp does not turn on:
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Check if the outlet itself is functional by plugging in another device.
  • Verify that the microswitch dimmer is being pressed correctly.
• Light flickers or dims unexpectedly:
  • Ensure the power connection is stable.
  • If the issue persists, contact customer support.

For problems not addressed here, or if troubleshooting steps do not resolve the issue, please contact Artemide customer support.

7. Specifications

8. Warranty and Support

For information regarding warranty coverage, product support, or service inquiries, please contact Artemide customer service directly. Keep your purchase receipt as proof of purchase.

Artemide Contact Information: Please refer to the official Artemide website or product packaging for the most current contact details.