YA-MAN RF Beaute Photo Plus Ruby HRF-24R Instruction Manual

1. Introduction

Thank you for choosing the YA-MAN RF Beaute Photo Plus Ruby HRF-24R. This advanced beauty device combines Radio Frequency (RF) technology with LED light therapy to support various skin care needs. Please read this instruction manual thoroughly before using the device to ensure safe and optimal performance. Keep this manual for future reference.

2. Safety Precautions

To prevent injury or damage to the device, always observe the following safety guidelines:

• Do not use the device if you have sensitive skin, skin conditions, or are pregnant.
• Consult a physician before use if you have any medical conditions or are undergoing medical treatment.
• Keep the device away from water and do not use it in wet environments.
• Do not disassemble, repair, or modify the device.
• Keep out of reach of children.
• Use only the provided charging adapter and cable.
• Discontinue use immediately if you experience discomfort or adverse reactions.

3. Package Contents

Verify that all items are present in the package:

• YA-MAN RF Beaute Photo Plus Ruby HRF-24R Main Unit
• AC Adapter
• USB Charging Cable
• User Manual (this document)
• Charging Stand (if included)

4. Device Overview

Familiarize yourself with the components of your HRF-24R device.

Figure 4.1: Front view of the YA-MAN RF Beaute Photo Plus Ruby HRF-24R device, showing the treatment head and control buttons.

• Treatment Head: Contains RF electrodes and LED lights for skin contact.
• Power/Mode Button: Press and hold to power on/off. Press briefly to cycle through modes.
• Level Button: Adjusts the intensity level for RF and EMS functions.
• LED Indicator: Displays current mode, intensity level, and battery status.
• Charging Port: Located at the bottom of the device for connecting the charging cable.

5. Setup

5.1 Charging the Device

1. Connect the USB charging cable to the AC adapter.
2. Plug the AC adapter into a power outlet.
3. Connect the other end of the USB charging cable to the charging port on the device or place the device on the charging stand.
4. The LED indicator will show charging status (e.g., blinking while charging, solid when fully charged).
5. A full charge typically takes approximately 2-3 hours.

5.2 Initial Preparation

• Ensure your skin is clean and free of makeup before use.
• Apply a suitable water-based gel or serum to the treatment area to ensure proper conductivity and smooth gliding of the device.

6. Operating Instructions

The HRF-24R features multiple modes for comprehensive skin care. Follow the recommended usage for each mode.

6.1 Power On/Off

• To power on, press and hold the Power/Mode button for 2 seconds.
• To power off, press and hold the Power/Mode button for 2 seconds. The device will also automatically power off after a certain period of inactivity in each mode.

6.2 Mode Selection and Usage

Press the Power/Mode button briefly to cycle through the available modes:

1. CLEAN Mode (RF + Ion Cleansing + Red LED):
   • Apply a cleansing lotion to a cotton pad and secure it to the treatment head.
   • Gently glide the device over your face in upward and outward motions.
   • Duration: Approximately 3 minutes.
2. MOISTURE Mode (RF + Ion Moisture + Red LED):
   • Apply a water-based serum or sheet mask to your face.
   • Move the device slowly over your face, ensuring full contact with the skin.
   • Duration: Approximately 3 minutes.
3. EMS UP Mode (RF + EMS + Red LED):
   • Apply a conductive gel or serum to your face.
   • Glide the device upwards from the jawline to the temples, and from the center of the face outwards.
   • Adjust EMS intensity using the Level button. Start with the lowest setting.
   • Duration: Approximately 3 minutes.
4. RF LED Mode (RF + Red LED):
   • Apply a conductive gel or serum.
   • Move the device in slow, circular motions over areas requiring RF and LED treatment.
   • Duration: Approximately 3 minutes.
5. COOL Mode (Cooling + Blue LED):
   • Use this mode after other treatments to soothe the skin and minimize pores.
   • Gently press the cool plate against your skin. No gliding is necessary.
   • Duration: Approximately 2 minutes.

6.3 Adjusting Intensity

In modes with adjustable intensity (e.g., EMS UP), press the Level button to cycle through low, medium, and high settings. Start with the lowest setting and increase gradually as comfortable.

7. Maintenance

7.1 Cleaning the Device

• After each use, power off the device and wipe the treatment head with a soft, damp cloth.
• Do not use alcohol, abrasive cleaners, or harsh chemicals, as these can damage the device.
• Ensure the device is completely dry before storing.

7.2 Storage

• Store the device in a cool, dry place, away from direct sunlight and high temperatures.
• Keep the device and accessories in their original packaging or a protective case to prevent damage.

8. Troubleshooting

If you encounter issues with your HRF-24R, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact YA-MAN customer support.

9. Specifications

10. Warranty and Support

YA-MAN products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included in your product packaging or visit the official YA-MAN website.

For technical support, troubleshooting assistance, or inquiries about your device, please contact YA-MAN customer service through their official website or the contact details provided in your product documentation.

Official Website: www.ya-man.com