Bayrol Technique Automatic Salt AS7

Introduction

This manual provides essential information for the installation, operation, and maintenance of your Bayrol Technique Automatic Salt AS7 system. The Automatic Salt AS7 is designed for comprehensive and automatic water treatment in swimming pools, continuously measuring and controlling pH levels and disinfectant levels (via redox potential). Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the device.

Safety Information

Always observe the following safety precautions to prevent personal injury or damage to the equipment:

• Ensure the power supply is disconnected before performing any installation, maintenance, or troubleshooting.
• Installation and electrical connections must be performed by qualified personnel in accordance with local regulations.
• Keep the device away from direct sunlight, extreme temperatures, and corrosive chemicals.
• Do not operate the system if any part is damaged or if there are signs of leakage.
• Use only genuine Bayrol replacement parts and accessories.
• Keep children and unauthorized persons away from the device during operation.

Product Overview

The Bayrol Technique Automatic Salt AS7 system integrates advanced technology for automated pool water management. Key components include the main control unit with a 4.3-inch touchscreen, the electrolysis cell, and various sensors for pH and redox measurement.

Figure 1: Front view of the Bayrol Technique Automatic Salt AS7 main control unit. This unit houses the intuitive 4.3-inch touchscreen display for system control and monitoring.

Figure 2: The Automatic Salt AS7 main unit shown alongside its electrolysis cell. The cell is responsible for converting salt into chlorine for disinfection.

Figure 3: Complete system components including the main unit, electrolysis cell, and flow switch. The flow switch ensures the system operates only when water is flowing.

The system features a Low Salt Technology, operating effectively with salt concentrations as low as 1.5 g/l. Its Smart & Easy connector system simplifies installation with an all-in-one component support and color-coded connectors.

Setup and Installation

The Bayrol Technique Automatic Salt AS7 is designed for easy installation. Follow these steps for a successful setup:

1. Mounting the Main Unit: Select a dry, well-ventilated location near your pool's filtration system, away from direct sunlight and heat sources. Securely mount the main control unit to a wall using appropriate fasteners.
2. Installing the Smart & Easy Connector: The all-in-one component support simplifies the connection of sensors and the electrolysis cell. Install this support into your pool's circulation pipework according to the provided plumbing diagram. Ensure proper sealing to prevent leaks.
3. Connecting the Electrolysis Cell: Connect the electrolysis cell to the cell support using the screw fittings. Ensure the cell is oriented correctly as indicated in the installation guide.
4. Connecting Sensors: Connect the pH and redox sensors to their respective color-coded ports on the main unit. Calibrate sensors as per the initial setup wizard.
5. Electrical Connection: Connect the system to a dedicated power supply, ensuring it is protected by a residual current device (RCD). Refer to the electrical wiring diagram for correct connections.
6. Initial Commissioning: Power on the device. The integrated commissioning assistant will guide you through the initial setup, including language selection, time/date settings, and sensor calibration.

For detailed plumbing and electrical diagrams, please refer to the separate installation guide included with your product packaging.

Operating Instructions

The Automatic Salt AS7 features an intuitive 4.3-inch touchscreen display and an easy-to-navigate graphical user interface (GUI).

• Main Screen: Displays current pH and redox values, system status, and active modes.
• Menu Navigation: Tap the screen to access the main menu. Use swipe gestures or arrow icons to navigate through options such as settings, calibration, history, and manual control.
• Setting Target Values: Adjust desired pH and disinfectant (redox) levels through the 'Settings' menu. The system will automatically work to maintain these values.
• Calibration: Regular calibration of pH and redox sensors is crucial for accurate readings. Access the 'Calibration' menu and follow the on-screen prompts using appropriate calibration solutions.
• Manual Control: In specific situations, you can manually override automatic operation to activate or deactivate dosing pumps or the electrolysis cell. Use this feature with caution.
• Alarms and Notifications: The system will display on-screen alerts for low salt levels, sensor errors, or other operational issues. Address these promptly.

For a comprehensive guide on all menu functions and advanced settings, consult the detailed operating manual accessible via the device's interface or the provided documentation.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your Bayrol Technique Automatic Salt AS7 system.

• Sensor Cleaning: Periodically inspect and clean the pH and redox sensors. Deposits can affect accuracy. Use a soft brush and a mild cleaning solution recommended by Bayrol.
• Electrolysis Cell Inspection: Check the electrolysis cell for scale buildup. If necessary, clean the cell using a diluted acid solution specifically designed for cell cleaning, following the manufacturer's instructions.
• Salt Level Monitoring: Although the system monitors salt levels, it is advisable to periodically check the pool's salt concentration manually to ensure it remains within the recommended range (1.5 g/l minimum).
• Software Updates: Check the Bayrol website for any available software updates for your device. Updates can improve performance and add new features.
• Winterization: During winter months or extended periods of inactivity, follow the winterization procedures outlined in the full manual to protect the system from freezing and damage.

Troubleshooting

This section provides solutions to common issues you might encounter with your Automatic Salt AS7 system.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Bayrol customer support.

Specifications

• Model: Automatic Salt AS7
• Brand: Bayrol Technique
• Water Treatment: Automatic pH and Disinfectant (Redox) control
• Salt Technology: Low Salt (operates from 1.5 g/l salt)
• Display: 4.3-inch Touchscreen
• Connectivity: Smart & Easy connector system
• Origin: Designed and manufactured by Bayrol TECHNIK, Germany
• Application: Swimming Pool Water Treatment

Warranty and Support

Your Bayrol Technique Automatic Salt AS7 system comes with a manufacturer's warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and coverage details.

For technical support, spare parts, or service inquiries, please contact your authorized Bayrol dealer or visit the official Bayrol website. When contacting support, please have your product model number (AS7) and serial number ready.