SALAV Performance Series Upright Garment Steamer GS34-BJ Instruction Manual

1. Important Safety Instructions

Please read all instructions carefully before using the SALAV Performance Series Upright Garment Steamer. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.

Always unplug the appliance from the electrical outlet when filling with water, emptying, or when not in use.
Do not immerse the steamer base in water or other liquids.
Use only distilled or de-mineralized water to prevent mineral buildup and extend product life.
Keep the steam nozzle away from your body and face during operation. Steam is hot and can cause burns.
Do not operate the steamer with a damaged cord or plug, or if the appliance has been dropped or damaged.
Close supervision is necessary when any appliance is used by or near children.
Ensure the hose is not kinked or blocked during use.
Place the steamer on a stable, flat surface during operation.

2. Product Overview

The SALAV Performance Series Upright Garment Steamer, model GS34-BJ, is designed to efficiently remove wrinkles from various fabrics using continuous steam. It features a powerful 1500-watt heating element and a large water tank for extended steaming sessions.

Key Features:

Powerful Steam Output: 1500 watts of continuous steam for effective wrinkle removal.
Large Water Tank: 1-liter translucent water tank provides over 30 minutes of continuous steam.
Adjustable Steam Settings: Four distinct steam settings for various fabric types (Silk, Wool, Cotton, Linen).
360° Swivel Multi-hook Hanger: Offers additional hanging space and swivels for convenient steaming of all garment sides.
Included Accessories: Comes with a fabric brush and pants press for enhanced garment care.
Ergonomic Steam Nozzle: Designed for comfortable handling and efficient steam delivery.

SALAV Performance Series Upright Garment Steamer GS34-BJ, showing the black base unit with a grey trim and the adjustable pole with a hanger.

Figure 2.1: SALAV Performance Series Upright Garment Steamer GS34-BJ.

3. Package Contents

Verify that all items are present in the package:

Steamer Base Unit
Adjustable Pole
360° Swivel Multi-hook Hanger
Steam Nozzle with Hose
Fabric Brush Attachment
Pants Press Attachment
Water Tank
Instruction Manual (this document)

Image showing the included pants press and fabric brush accessories for the SALAV garment steamer.

Figure 3.1: Included Accessories: Pants Press and Fabric Brush.

4. Assembly

Follow these steps to assemble your SALAV Garment Steamer:

Insert the adjustable pole into the designated opening on the steamer base until it clicks securely into place.
Attach the 360° swivel multi-hook hanger to the top of the adjustable pole. Ensure it is firmly seated.
Connect the steam hose to the steam outlet on the steamer base. Twist clockwise until tight.
Place the steam nozzle into the hanger's cradle when not in use.

The 360-degree swivel multi-hook hanger of the SALAV steamer, with multiple shirts hanging, highlighting its capacity and flexibility.

Figure 4.1: Assembled steamer with 360° Swivel Multi-hook Hanger.

Assembly and Operation Demonstration:

Video 4.1: This video demonstrates the setup and operation of the SALAV Performance Series Upright Garment Steamer. It shows how to fill the water tank, adjust the pole, use the fabric brush and pants press, and steam various garments with the 360-degree swivel hanger.

5. Operation

5.1 Filling the Water Tank

Ensure the steamer is unplugged from the power outlet.
Remove the water tank from the base unit.
Unscrew the cap at the bottom of the water tank.
Fill the tank with distilled or de-mineralized water. Do not overfill.
Securely screw the cap back on and place the water tank back into the base unit.

5.2 Powering On and Fabric Settings

Plug the steamer into a standard electrical outlet.
Turn the steam setting dial on the base unit to your desired fabric type (Silk, Wool, Cotton, Linen). The steamer will begin to heat up.
Allow approximately 45 seconds for the steamer to heat up and produce continuous steam.

Close-up of the steam setting dial on the SALAV steamer, indicating options for Silk, Wool, Cotton, and Linen.

Figure 5.1: Multiple Steam Settings Dial.

5.3 Steaming Garments

Hang the garment on the 360° swivel multi-hook hanger.
Hold the steam nozzle a few inches away from the fabric.
Move the nozzle slowly up and down the garment, allowing the steam to penetrate the fibers.
For stubborn wrinkles, attach the fabric brush to the nozzle and gently brush the fabric while steaming.
To create crisp creases on pants, use the pants press attachment. Clamp the pants press onto the desired area and apply steam.
After steaming, allow the garment to cool and dry before wearing or storing.

SALAV Garment Steamer with a blue collared shirt hanging on its integrated hanger, demonstrating its upright use.

Figure 5.2: Steaming a shirt on the hanger.

A hand holding the steamer nozzle against a blue shirt on the hanger, illustrating the steaming process.

Figure 5.3: Applying steam to a garment.

Collage showing before and after images of wrinkled and steamed garments, alongside swatches of various fabric types like cotton, silk, linen, wool, polyester, and rayon.

Figure 5.4: Steaming results on various fabric types.

6. Maintenance

6.1 Cleaning

Always unplug the steamer and allow it to cool completely before cleaning.
Wipe the exterior of the steamer base with a soft, damp cloth. Do not use abrasive cleaners.
Empty any remaining water from the tank after each use to prevent mineral buildup.
Clean the steam nozzle and attachments with a damp cloth as needed.

6.2 Descaling

Mineral deposits from water can build up inside the steamer over time, affecting performance. Descale your steamer regularly (every 3-6 months, or more often in hard water areas).

Ensure the steamer is unplugged and cool.
Remove the water tank and empty any remaining water.
Mix a solution of 50% white vinegar and 50% water.
Pour the solution into the water tank and reattach it to the base.
Plug in the steamer and turn it on to the 'Cotton' setting. Allow it to steam until half of the solution has been used.
Turn off and unplug the steamer, allowing it to cool for at least 30 minutes.
Empty the remaining solution from the tank and rinse thoroughly with fresh water.
Fill the tank with fresh distilled water and run the steamer for a few minutes to flush out any residual vinegar smell.

7. Troubleshooting

If you encounter issues with your steamer, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
No steam or low steam output	Water tank empty; Steamer not heated sufficiently; Mineral buildup; Hose kinked.	Refill water tank; Allow 45 seconds to heat; Descale the steamer; Straighten the hose.
Water leaking from nozzle or hose	Hose not securely attached; Overfilled water tank; Condensation in hose.	Ensure hose is tightly connected; Do not overfill tank; Hold nozzle upright to drain condensation.
Steamer is noisy	Normal pump operation; Low water level.	This is normal during operation; Refill water tank.
Steamer not turning on	Not plugged in; Power outlet issue.	Check power connection; Test outlet with another appliance.

8. Specifications

Model: GS34-BJ
Brand: SALAV
Wattage: 1500 watts
Voltage: 120 Volts
Water Tank Capacity: 1 Liter (approximately 33.8 fl oz)
Continuous Steam Time: Over 30 minutes
Heat-up Time: Approximately 45 seconds

Close-up of the double-insulated hose of the SALAV garment steamer, showing its durable construction.

Figure 8.1: Double Insulated Hose.

9. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or visit the official SALAV website. Do not attempt to repair the appliance yourself, as this may void the warranty and cause further damage.

SALAV GS34-BJ