1. Introduction
This manual provides comprehensive instructions for the safe and effective use of your ORORO Heated Gloves. Please read this manual thoroughly before operating the product and retain it for future reference. These gloves are designed to provide warmth and comfort in cold conditions for various outdoor activities.
2. Safety Information
- Do not use the gloves if they are wet or damp.
- Avoid puncturing or damaging the heating elements or battery.
- Do not expose batteries to extreme temperatures or direct sunlight.
- Keep batteries away from children and pets.
- If you experience discomfort or excessive heat, immediately turn off the gloves.
- Consult a physician before use if you have a medical condition, are pregnant, or have a pacemaker.
3. Package Contents
Verify that all items are present in your package:
- 1 pair of ORORO Heated Gloves
- 2 x 7.4V Rechargeable Batteries
- 1 x Power Adapter with Charging Cable
- 1 x Instruction Manual
Image: All items included in the ORORO Heated Gloves package.
Video: An unboxing and initial overview of the heated gloves, demonstrating the contents and basic features.
4. Product Overview
The ORORO Heated Gloves are engineered for optimal warmth and durability, featuring advanced heating technology and robust materials.
- Hand-Shaped Heating Elements: Durable composite coating heating elements are strategically wrapped from the back of the hands to the front of each finger, ensuring even heat distribution.
- Long-Lasting & Switchable Heat: Two 7.4V rechargeable batteries provide up to 8 hours of heat. Three heating settings (high, medium, low) allow for adjustable warmth.
- Superior Insulation: 3M Thinsulate Insulation traps generated heat while allowing moisture to escape, maintaining comfort.
- Optimal Palm & Finger Construction: Pre-curved fingers with goatskin offer comfort and dexterity. Reinforced Taslan palms enhance durability. Touch-screen compatible thumb and index fingers allow device use without removing gloves.
- Protection from the Elements: A water-repellent and snowproof outer shell keeps moisture out, preserving warmth.
Image: The ORORO Heated Gloves with visible heating elements.
Image: Detailed view of the glove's material construction, including goatskin and Taslan.
5. Setup
Follow these steps to prepare your gloves for use:
- Locate the zippered battery pocket on the cuff of each glove.
- Open the pocket and find the internal power cable.
- Connect one fully charged 7.4V battery to the power cable.
- Carefully place the battery into the pocket and zip it closed.
- Repeat for the other glove.
Image: Close-up of the battery pocket and other glove features.
Video: Demonstration of connecting the battery and securing it within the glove's pocket.
6. Operating Instructions
To activate and adjust the heat settings:
- Turning On: Press and hold the power button on the back of the glove for approximately 2 seconds until the LED indicator illuminates. The gloves will typically start on the highest heat setting (red light).
- Adjusting Heat: Briefly press the power button to cycle through the heat settings:
- High (Red Light): Provides maximum heat for approximately 3 hours.
- Medium (White Light): Provides moderate heat for approximately 4 hours.
- Low (Blue Light): Provides gentle heat for approximately 8 hours.
- Turning Off: Press and hold the power button for approximately 2 seconds until the LED indicator turns off.
Image: Heat duration chart for different settings.
Image: Temperature levels for each heat setting.
Video: Demonstration of turning on the gloves and observing heat distribution with a thermal camera.
7. Charging the Batteries
To ensure optimal performance, fully charge the batteries before each use.
- Remove the batteries from the glove pockets.
- Connect the charging cable to the power adapter.
- Plug the charging cable into each battery's charging port.
- Plug the power adapter into a standard electrical outlet.
- The LED indicator on the battery will show charging status (e.g., red for charging, green for fully charged).
- Once fully charged, disconnect the batteries from the charger.
8. Maintenance and Care
Proper care extends the life of your heated gloves:
- Always remove batteries before cleaning.
- Hand wash the gloves in cold water with mild detergent. Do not bleach or iron.
- Hang to air dry completely before reinserting batteries or storing.
- Do not machine wash, tumble dry, or dry clean, as this may damage the heating elements.
- Store gloves and batteries in a cool, dry place when not in use.
9. Troubleshooting
If your gloves are not functioning as expected, try the following:
- Gloves not heating: Ensure batteries are fully charged and correctly connected to the internal cables. Press and hold the power button for 2 seconds to activate.
- Short battery life: Ensure batteries are fully charged. Battery performance can decrease in extremely cold temperatures.
- Uneven heating: Check for any kinks or damage to the internal wiring. If the issue persists, contact customer support.
10. Specifications
- Department: Unisex-adult
- Date First Available: October 27, 2020
- Origin: Imported
- Battery: 7.4V Rechargeable Lithium Polymer (2 included)
- Heat Settings: High, Medium, Low
- Heat Duration: Up to 8 hours (on Low setting)
11. Sizing Guide
To ensure the best fit, please refer to the following hand size chart:
| Brand Size | Hand Circumference (in) | Hand Length (in) |
|---|---|---|
| Small | 7.9 - 8.5 | 7.5 - 7.9 |
| Medium | 8.5 - 9.1 | 7.9 - 8.3 |
| Large | 9.1 - 9.6 | 8.3 - 8.5 |
| X-Large | 9.6 - 10.2 | 8.5 - 8.7 |
| XX-Large | 10.2 - 10.8 | 8.7 - 8.9 |
12. Warranty and Support
ORORO products are designed for quality and durability. For warranty information or technical support, please refer to the official ORORO website or contact their customer service directly. Keep your purchase receipt for warranty claims.