1. Important Safety Instructions
To reduce the risk of fire, electric shock, or injury when using your appliance, follow these basic precautions:
- Read all instructions before using the appliance.
- Do not touch cold surfaces immediately after the unit has been plugged in.
- Ensure the appliance is properly grounded.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- Unplug the appliance before cleaning or performing any maintenance.
- Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- Do not damage the refrigerant circuit.
- Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
2. Product Overview
The Ivation 126 Can Beverage Refrigerator is a freestanding unit designed for cooling beverages. It features an Ultra Cool Compressor for efficient temperature regulation, a reversible glass door, and adjustable shelving for flexible storage. The exterior is stainless steel with a recessed door handle and dual-pane tinted glass.

Image 2.1: Front view of the Ivation 126 Can Beverage Refrigerator, showcasing its capacity with various beverages.

Image 2.2: Diagram illustrating key features such as LED lighting, efficient cooling, reversible door, flexible storage, and powerful operation.
3. Setup and Installation
3.1 Unpacking
- Remove all packaging materials, including the foam base and adhesive tape.
- Inspect the refrigerator for any damage. Report any damage to the retailer immediately.
- Allow the unit to stand upright for at least 3 hours before plugging it in to allow the refrigerant to settle.
3.2 Placement
This appliance is designed for freestanding installation only. Ensure proper air circulation around the unit.
- Place the refrigerator on a flat, solid surface strong enough to support the unit when fully loaded.
- Allow at least 5 inches (12.7 cm) of space between the back and sides of the refrigerator and any adjacent walls to ensure proper ventilation.
- Avoid placing the unit in direct sunlight or near heat sources (e.g., stoves, heaters, radiators).
- Ensure the unit is level using the adjustable leveling legs. Proper leveling is crucial for efficient operation and door alignment.

Image 3.1: Product dimensions for planning placement.
3.3 Door Reversal
The door hinges are reversible, allowing the door to open from either the left or right side to suit your setup. Refer to the detailed instructions in the full user manual for the reversal procedure.
3.4 Shelving Installation
The unit includes 3 wire shelves. These shelves are adjustable and can be placed in various slots to accommodate different beverage sizes and quantities.

Image 3.2: Interior view demonstrating adjustable shelving and multiple slot options.
3.5 Electrical Connection
Plug the appliance into a dedicated, grounded 120V AC outlet. Do not use extension cords or adapter plugs.
4. Operating Instructions
4.1 Temperature Control
The refrigerator features a mechanical thermostat with 5 cooling levels. The dial is located inside the unit. Turn the dial to select your desired cooling level, with '5' being the coldest setting.

Image 4.1: Temperature control dial with 5 cooling levels.
- Start with a medium setting (e.g., '3') and adjust as needed.
- The lowest temperature achievable is approximately 34°F (1°C).
- Avoid setting the temperature too low, especially if storing items prone to freezing.
4.2 LED Interior Lighting
The unit is equipped with soft, interior LED lighting to illuminate your beverages. The light can be controlled via a switch, typically located near the temperature dial.
4.3 Capacity and Storage
This model has a capacity of 126 standard 12-oz cans. The adjustable wire shelves allow for flexible arrangement of various bottle and can sizes.
- Distribute items evenly on the shelves to prevent tipping.
- Do not block the internal air vents to ensure consistent cooling.
4.4 Whisper-Quiet Operation
The compressor system is designed for quiet operation. Occasional humming or gurgling sounds are normal as the refrigerant circulates and the compressor cycles on and off.
5. Maintenance
5.1 Cleaning
Regular cleaning helps maintain the appearance and efficiency of your beverage refrigerator.
- Exterior: Wipe with a soft cloth and mild detergent. Avoid abrasive cleaners.
- Interior: Clean with a solution of baking soda and water (2 tablespoons baking soda to 1 quart water). Rinse thoroughly and dry.
- Door Gasket: Clean the door gasket regularly to ensure a proper seal.
- Condenser Coils: Periodically vacuum the condenser coils at the back of the unit to remove dust and debris. This improves cooling efficiency.

Image 5.1: Rear view of the unit, showing the location of the compressor and condenser coils for maintenance.
5.2 Defrosting
This unit features manual defrost. Frost buildup on the interior back wall is normal. When frost accumulation exceeds 1/4 inch (0.6 cm), manually defrost the unit.
- Unplug the unit.
- Remove all beverages and shelves.
- Leave the door open to allow frost to melt naturally. Place towels at the bottom to absorb water.
- Do not use sharp objects or heating devices to remove frost.
- Clean and dry the interior thoroughly before plugging the unit back in.
5.3 Power Outage
In case of a power outage, keep the door closed to maintain the internal temperature for as long as possible. Avoid opening the door unnecessarily.
5.4 Vacation and Storage
For extended periods of non-use:
- Unplug the unit.
- Remove all contents.
- Clean and dry the interior thoroughly.
- Leave the door slightly ajar to prevent odors and mold growth.
6. Troubleshooting
Review this section before calling for service. It may save you time and expense.
| Problem | Possible Cause | Solution |
|---|---|---|
| Refrigerator does not operate. | Not plugged in; Circuit breaker tripped/fuse blown; Temperature control set to '0'. | Ensure plug is secure; Reset circuit breaker/replace fuse; Turn temperature control to a desired setting. |
| Temperature is not cold enough. | Temperature control set too high; Door opened too frequently; Poor ventilation; Excessive frost buildup. | Adjust temperature to a colder setting; Minimize door openings; Ensure adequate clearance around unit; Defrost the unit. |
| Unit is too noisy. | Unit not level; Loose parts; Normal compressor operation. | Adjust leveling legs; Check for loose items inside or on top of the unit; Normal operating sounds are expected. |
| Door does not close properly. | Unit not level; Door gasket dirty/damaged; Shelves out of position. | Adjust leveling legs; Clean or replace door gasket; Reposition shelves. |
| Items are freezing. | Temperature control set too low; Items placed too close to the back wall. | Adjust temperature to a warmer setting; Reposition items away from the back wall. |
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Ivation |
| Model Info | IVABC1260SS |
| Item Weight | 55.8 pounds (25.3 kg) |
| Product Dimensions (D x W x H) | 17.32 x 18.66 x 33.07 inches (44 x 47.4 x 84 cm) |
| Efficiency | High Efficiency |
| Energy Use | 0.48 Kilowatt Hours |
| Capacity | 3 Cubic Feet (126 Can) |
| Annual Energy Consumption | 176.81 Kilowatt Hours Per Year |
| Noise Level | 36 dB |
| Installation Type | Freestanding |
| Color | Stainless Steel |
| Voltage | 120 Volts |
| Wattage | 90 Watts |
| Defrost System | Manual |
| Door Hinges | Reversible |
| Door Material Type | Glass |
| Shelf Type | Wire |
| Number of Shelves | 3 |
| Included Components | Can Dispenser |
| Number Of Doors | 1 |
8. Warranty Information
This Ivation beverage refrigerator comes with a 1 Year Limited Manufacturer's Warranty. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact customer support.
9. Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Ivation customer support. Visit the official Ivation store for more information and contact options:





