1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Hamilyeah Bathroom Vanity Light Fixture, Model WLFBR1006. This modern wall-mounted lighting fixture features a brass electroplated metal finish and clear glass shades, designed for indoor use in areas such as bathrooms and living rooms. Please read this manual thoroughly before installation and retain it for future reference.
Figure 1: Hamilyeah 3-Light Gold Bathroom Vanity Light Fixture.
2. Safety Information
WARNING: Risk of Electric Shock. Always shut off power to the circuit at the main electrical panel and use a voltage tester to confirm the power is off before beginning any installation, maintenance, or bulb replacement procedures. Failure to do so may result in serious injury or death.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
- If you are unsure about wiring or installation, consult a qualified licensed electrician.
- Do not exceed the maximum wattage specified for the bulbs (Max 100W per socket).
- This fixture is designed for indoor use only and is suitable for damp locations. Do not install in areas with direct water exposure.
- Handle glass shades with care to prevent breakage.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact customer support.
- Light Fixture (Main Unit)
- Glass Shades (3 pieces)
- Mounting Hardware (Instruction Kits)
- Instruction Manual (This document)
4. Product Specifications
Figure 2: Product Dimensions and Key Features.
| Feature | Detail |
|---|---|
| Brand | Hamilyeah |
| Model Number | WLFBR1006 |
| Color | Brass |
| Material | Ceramic, Glass, Metal |
| Style | Art Deco; Modern; Industrial |
| Light Fixture Form | Vanity |
| Room Type | Bathroom, Living Room |
| Product Dimensions (L x W x H) | 20.86" x 6.11" x 9.44" |
| Indoor/Outdoor Usage | Indoor use only |
| Power Source | Corded Electric |
| Installation Type | Wall Mount |
| Light Source Type | Incandescent (compatible with LED, CFL, Halogen) |
| Shade Material | Glass |
| Number of Light Sources | 3 |
| Voltage | 120 Volts (AC) |
| Bulb Base | E26 |
| Max Wattage per Bulb | 100 Watts |
| Dimmable | Yes (with dimmable bulbs and dimmer switch, not included) |
| Certification | UL Listed |
| Item Weight | 4.7 Pounds |
Figure 3: Key Material and Finish Features.
5. Installation Guide
Installation should be performed by individuals with full electrical knowledge and previous experience. Refer to the included Instruction Kits for detailed diagrams. For a comprehensive guide, you may also refer to the Installation Manual (PDF).
Tools Required (Not Included):
- Screwdriver (Phillips and Flathead)
- Wire Strippers
- Pliers
- Electrical Tape
- Voltage Tester
- Safety Glasses
Installation Steps:
- SAFETY FIRST: Before starting, ensure the power to the light fixture's circuit is turned off at the circuit breaker or fuse box. Use a voltage tester to confirm that the power is completely off at the wall box.
- Attach the Mounting Plate: Secure the mounting plate to the electrical junction box in the wall using the provided screws. Ensure it is firmly attached and level.
- Hardwire the Light Fixture: Connect the electrical wires from the fixture to the corresponding wires in the junction box. Typically, connect the black wire (live) from the fixture to the black wire from the wall, the white wire (neutral) from the fixture to the white wire from the wall, and the green or bare copper wire (ground) from the fixture to the ground wire from the wall. Use wire nuts to secure connections and wrap with electrical tape for added safety.
- Tighten the Fixture: Carefully align the fixture body with the mounting plate and secure it using the provided screws or nuts. Ensure the fixture is flush against the wall and stable.
- Install Glass Shades and Bulbs: Gently attach the glass shades to the fixture. Insert E26 base bulbs (Max 100W, not included) into each socket.
- Restore Power: Once installation is complete and all connections are secure, turn the power back on at the main electrical panel. Test the light fixture.
The wall sconces can be installed to point upwards or downwards, depending on your desired aesthetic and lighting direction.
6. Operation
Your Hamilyeah Bathroom Vanity Light Fixture is designed for straightforward operation.
Turning On/Off:
Control the light fixture using your standard wall switch connected to the circuit. Ensure the switch is in the 'ON' position for the fixture to receive power.
Dimmable Functionality:
This fixture is dimmable, allowing you to adjust the brightness to suit your needs and create different ambiances. To utilize the dimmable feature, you must use:
- Dimmable E26 Bulbs: Ensure the bulbs you install are explicitly rated as dimmable.
- Compatible Dimmer Switch: A dimmer switch (not included) must be installed on the wall circuit controlling the fixture. Consult a qualified electrician for dimmer switch installation if needed.
7. Care and Maintenance
Regular care will help maintain the appearance and functionality of your light fixture.
Cleaning:
- Always turn off the power to the fixture and allow it to cool before cleaning.
- Wipe the metal parts with a soft, dry cloth. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish.
- The glass shades can be cleaned with a soft cloth dampened with water or a mild glass cleaner. Dry thoroughly.
Bulb Replacement:
- Ensure the power is off and the bulbs have cooled before attempting to replace them.
- Unscrew the old E26 bulb counter-clockwise.
- Screw in the new E26 bulb clockwise, ensuring it is rated for a maximum of 100W.
- Only use bulbs with an E26 base.
8. Troubleshooting
If you encounter issues with your light fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wiring connection Faulty bulb | Check circuit breaker/fuse. Ensure wall switch is ON. Turn off power, check wire connections at fixture and junction box. Replace bulb with a known working one. |
| Light flickers | Loose bulb Incompatible dimmer/bulb Loose wiring | Tighten bulb. Ensure dimmable bulbs are used with a compatible dimmer switch. Turn off power, check wire connections. |
| Bulbs burn out quickly | Incorrect bulb wattage Poor quality bulbs Voltage fluctuations | Ensure bulbs do not exceed 100W. Use high-quality bulbs. Consult an electrician if voltage issues are suspected. |
| Fixture finish appears dull or discolored | Improper cleaning agents Environmental factors | Use only a soft, dry cloth for cleaning. Avoid harsh chemicals. Ensure fixture is used in appropriate indoor, damp-rated environments. |
If the problem persists after attempting these solutions, please contact Hamilyeah customer support.
9. Warranty and Customer Support
Warranty Information:
Hamilyeah provides a 1-YEAR warranty for this product, ensuring your confidence in its quality and performance. This warranty covers manufacturing defects and issues arising from normal use.
Customer Support:
Ensuring every customer is satisfied is our top priority. If you have any questions, concerns, or require assistance with your Hamilyeah product, please do not hesitate to contact us. We are always glad to help!
To communicate with Hamilyeah customer support:
- Go to your order history on the platform where you purchased the product.
- Find your specific order for the Hamilyeah Bathroom Vanity Light Fixture.
- Select the option for 'Problem with Order' or 'Contact Seller'.
- Choose the relevant topic for your inquiry.
We are committed to providing professional after-sale service to ensure an enjoyable shopping experience.
