1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your SUPAREE DOT Round LED Headlights and Fog Lights Combo. This lighting system is designed to enhance visibility and safety for compatible Jeep Wrangler models, offering multiple lighting patterns including high beam, low beam, daytime running lights (DRL), and amber turn signals.
Image: SUPAREE LED Headlights and Fog Lights installed on a Jeep Wrangler, showcasing the integrated design.
2. Safety Information
Please read all safety warnings and instructions before installation and use. Failure to follow these instructions may result in property damage, personal injury, or improper operation of the product.
- Always disconnect the vehicle's battery before performing any electrical work to prevent electrical shock or damage.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits and water ingress.
- Verify local regulations regarding automotive lighting modifications before installation.
- Do not look directly into the LED lights when they are illuminated, as this may cause eye strain or damage.
- Professional installation is recommended if you are unfamiliar with automotive electrical systems.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- LED Headlights (2 units)
- LED Fog Lights (2 units)
- Necessary wiring harnesses and adapters
Video: An official SUPAREE video showcasing the Halo Headlights and Fog Light Combo, demonstrating the product's features and components.
4. Setup & Installation
Installation is typically plug-and-play and can be completed in 20 minutes or less for most compatible models. However, some models may require additional steps or components.
4.1 Compatibility Notes:
- Compatible with Wrangler JK 2-Door and 4-Door (2007–2017), Wrangler LJ Unlimited (2004–2006), Wrangler TJ (1997–2006), CJ-8 Scrambler (1981–1985), and CJ-7 (1976–1986).
- Fits trims including Rubicon, Sport, Sahara, Unlimited Hard Rock Edition, Willys Wheeler, Altitude, Dragon Edition, X Sport Utility 2-Door, 4-Door.
- Note: The headlight requires a 9-inch headlight bracket to fit 2018+ JL / 2020+ JT models. The fog lights do not fit JL and JT models.
4.2 General Installation Steps:
- Preparation: Park your vehicle on a level surface, engage the parking brake, and turn off the engine. Disconnect the negative terminal of the vehicle's battery.
- Remove Existing Lights: Carefully remove the grille and existing headlights and fog lights according to your vehicle's service manual. Disconnect the wiring harnesses.
- Connect New Lights:
- Connect the new SUPAREE LED Headlights and Fog Lights to the vehicle's wiring harnesses using the provided adapters. Ensure all connections are secure.
- For the Daytime Running Light (DRL) and Turn Signal functions, connect the additional wires as instructed in the included wiring diagram. This typically involves connecting a white wire for DRL to a fuse box and a yellow wire for the turn signal.
- Test Functionality: Before reassembling, reconnect the battery and test all light functions (high beam, low beam, DRL, turn signals, fog lights) to ensure they operate correctly.
- Adjust Aim: Adjust the headlight beam pattern to ensure proper alignment and to avoid blinding oncoming traffic. Refer to your vehicle's manual for specific aiming procedures.
- Reassemble: Securely mount the new lights and reattach the grille and any other components removed during installation.
Image: Individual components of the SUPAREE LED Headlight and Fog Light kit, including wiring.
5. Operating Instructions
The SUPAREE LED Headlights and Fog Lights Combo offers multiple lighting patterns for various driving conditions:
- Daytime Running Light (DRL): Provides a bright white halo ring for increased daytime visibility.
- Amber Turn Signal: The halo ring illuminates in amber when the turn signal is activated.
- Low Beam: Standard illumination for regular driving, providing a clear and wide light pattern.
- High Beam: Maximum illumination for enhanced visibility during night driving or in low-light conditions.
- Fog Lights: Provide additional illumination close to the ground, designed to cut through fog, rain, or snow.
Image: Visual representation of the 3+4 lighting patterns, including high beam, low beam, fog beam, DRL (6000K white), and turn signal light (3000K amber.
Image: Comparison illustrating the improved light projection and reduced glare when using the headlight and fog light combo, showing distinct high beam and fog light patterns.
6. Maintenance
To ensure optimal performance and longevity of your SUPAREE LED lights, follow these maintenance guidelines:
- Cleaning: Clean the lens covers regularly with a soft cloth and mild soap solution to remove dirt and debris. Avoid abrasive cleaners that could scratch the polycarbonate lens.
- Moisture Removal: The headlights are designed with breathing holes to manage internal moisture. If moisture accumulates inside the headlight:
- Open the valve on the back of the headlight.
- Turn on the headlights for 1-2 hours to allow the moisture to evaporate.
- Wiring Inspection: Periodically check all wiring connections for signs of wear, corrosion, or looseness. Secure any loose connections and repair damaged insulation.
Image: Illustration of the efficient cooling design with ribbed fins and instructions for removing internal moisture via a breathing hole valve.
7. Troubleshooting
If you encounter issues with your SUPAREE LED Headlights and Fog Lights, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights not turning on or flickering | Loose wiring connection, faulty adapter, insufficient power, EMC device incompatibility. |
|
| Moisture inside the lens | Condensation due to temperature differences, blocked breathing hole. |
|
| Incorrect light operation (e.g., high beams on with parking lights) | Wiring error, vehicle-specific electrical system incompatibility. |
|
| Fog light connectors do not fit OEM harnesses | Vehicle-specific harness variations. |
|
| Headlights blind oncoming drivers or have poor beam pattern | Improper aiming. |
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand | SUPAREE |
| Model Number | SP-CL706-FBA |
| Light Source Type | LED |
| Voltage | 12 Volts |
| Headlight High Beam Lumens | Up to 4500 lumens |
| Headlight Low Beam Lumens | Up to 3200 lumens |
| Color Temperature | 6000K (Headlights & Fog Lights) |
| Material | Durable die-cast aluminum base, Polycarbonate Lens |
| Waterproof Rating | IP67 |
| Lifespan | Up to 50,000 hours |
| Auto Part Position | Front Center |
| Special Feature | Waterproof, Ribbed design for efficient cooling |
Image: The IP67 waterproof design of the SUPAREE LED lights, illustrating protection against various weather conditions.
9. Warranty & Support
SUPAREE stands behind the quality of its products.
- Warranty: This product comes with a 24-month warranty for peace of mind.
- Support: For any questions regarding installation, product quality, or troubleshooting, please contact the SUPAREE customer service team. They provide targeted solutions for flickering, error codes, internal moisture, and installation issues.
- Returns/Replacements: Free returns are offered for mismatched models, and free replacements for non-working headlights within the warranty period.
You can often find contact information for SUPAREE customer service on their official website or through the retailer where the product was purchased.