LLS Automatic Watch Winder (Model: 4+6 Watch Winder) Instruction Manual

1. Product Overview

The LLS Automatic Watch Winder is an elegant solution for maintaining the functionality of your automatic watches. It combines a sophisticated design with practical features to ensure your timepieces are always accurate and ready to wear.

• Elegant Leather Design: Features auxiliary winding steel plates and a 3mm glass lid for watch display. The soft interior protects watches from scratches, and adjustable pillows accommodate various watch sizes.
• Environmentally Friendly Wooden Board: Constructed from durable 12mm P2MDF wooden board with an elegant black leather finish, suitable for any desk or dresser.
• Easy To Use: Simple button operation with two running speeds to provide stable mechanical power. The winding cycle is 2 minutes clockwise, stop 6 minutes, 2 minutes counter-clockwise, stop 6 minutes, then repeat.
• Flexible Watch Pillow: Designed to fit both men's and women's watches, accommodating over 99% of automatic mechanical watches and various watch bands. Watches can be fitted vertically.

This watch winder is designed to be quiet, making it suitable for placement in various rooms without causing disturbance.

2. Setup Instructions

1. Unboxing: Carefully remove the watch winder from its packaging. Inspect for any damage. The unit is typically well-protected with foam and may include a cleaning cloth.
2. Place Watches on Pillows:
   • Gently place your automatic watches onto the flexible watch pillows. Ensure the watch band is securely fastened around the pillow.
   • For watches with smaller bands or bracelets, the flexible pillow can be adjusted to provide a snug fit, preventing the watch from falling off during rotation.

   

3. Connect Power: Locate the power input port on the back of the watch winder. Connect the provided power adapter to the unit and then plug it into a standard electrical outlet.

3. Operating Instructions

1. Power On/Off: Use the switches located on the back of the unit to turn on the individual winding modules. Each module can be controlled independently.
2. Winding Modes: The watch winder operates on a preset cycle to ensure optimal winding for most automatic watches. The cycle is:
   • 2 minutes clockwise rotation.
   • Stop for 6 minutes.
   • 2 minutes counter-clockwise rotation.
   • Stop for 6 minutes.
   • Repeat the cycle.

   This cycle provides a stable mechanical power to keep your watches running accurately.

3. LED Lighting: Some models may feature internal LED lighting. Refer to the specific controls on your unit to activate or deactivate the lighting feature.

The watch winder is designed for quiet operation, ensuring it does not disturb your environment.

4. Maintenance

• Cleaning: Use a soft, dry cloth (a cleaning cloth may be included) to gently wipe the exterior and interior surfaces of the watch winder. Avoid abrasive cleaners or solvents.
• Glass Care: For the glass lid, use a glass cleaner and a soft cloth to prevent streaks and scratches.
• Environmental Conditions: Keep the watch winder in a dry environment, away from direct sunlight, extreme temperatures, and high humidity to prevent damage to the materials and internal mechanisms.

5. Troubleshooting

• Winder Not Operating:
  • Ensure the power adapter is securely plugged into both the watch winder and a working electrical outlet.
  • Check that the individual power switches on the back of the unit are in the "On" position.
• Watches Not Winding Properly:
  • Verify that the watches are securely placed on the flexible pillows and are not loose.
  • Confirm that the winding module is rotating. If not, refer to "Winder Not Operating" above.
  • Some automatic watches have specific winding requirements (Turns Per Day - TPD). While this winder has a standard cycle, consult your watch's manual if issues persist.
• Unusual Noise:
  • Ensure the watch winder is placed on a flat, stable surface.
  • Check that watches are properly seated and not rubbing against the glass lid or interior.
  • The motors are designed for quiet operation. If excessive noise occurs, contact customer support.

6. Specifications

• Package Dimensions: 14 x 11.6 x 9.5 inches
• Item Weight: 7.6 Pounds
• Model Number: 4+6 Watch Winder
• Manufacturer: DOOMMY
• First Available Date: October 26, 2020
• Capacity: 4 winding slots, 6 static storage slots
• Material: Fiber Leather, 12mm P2MDF Wooden Board, Glass Lid
• Winding Cycle: 2 mins CW → 6 mins Stop → 2 mins CCW → 6 mins Stop → Repeat

7. Warranty and Support

For warranty information or technical support, please contact the manufacturer, DOOMMY, directly or refer to the product's official website.

Protection plans may be available for purchase separately. Please check with your retailer for details on extended warranty options.