1. Introduction
Thank you for purchasing the iHome XT-59 True Wireless Earbuds. This manual provides instructions for setup, operation, and maintenance of your earbuds. Please read it thoroughly before use and retain it for future reference.
2. What's in the Box
- iHome XT-59 True Wireless Earbuds (Left and Right)
- Charging Case
- Ear Cushions (various sizes)
- USB Charging Cable
3. Product Overview
Familiarize yourself with the components of your iHome XT-59 True Wireless Earbuds.
Figure 3.1: iHome XT-59 True Wireless Earbuds in their charging case, with the case indicating wireless charging capability.
3.1 Earbuds
- Touch Control Area: For playback, calls, and voice assistant.
- Microphone: For calls and voice commands.
- Charging Contacts: Connects to the charging case.
Figure 3.2: Close-up view of the individual iHome XT-59 earbuds, showing the touch control area and microphone.
3.2 Charging Case
- Earbud Charging Slots: Holds and charges the earbuds.
- LED Indicator: Shows charging status of the case and earbuds.
- USB Charging Port: For wired charging of the case.
Figure 3.3: Side view of the iHome XT-59 charging case, highlighting the USB charging port.
4. Setup
4.1 Charging the Case
- Connect the provided USB charging cable to the charging port on the case.
- Plug the other end of the USB cable into a USB power adapter (not included) or a computer's USB port.
- The LED indicator on the case will illuminate to show charging status. It will turn solid when fully charged.
Note: A full charge for the case typically takes approximately 2 hours.
4.2 Charging the Earbuds
- Place the earbuds into their respective charging slots inside the charging case. Ensure the charging contacts align.
- Close the charging case lid. The earbuds will begin charging automatically.
- The LED indicators on the earbuds (if present) or the case will show their charging status.
Note: The earbuds will automatically power off when placed in the charging case.
4.3 Pairing with a Bluetooth Device
- Ensure the charging case is charged and the earbuds are inside.
- Open the charging case. The earbuds will automatically power on and enter pairing mode. The LED indicator on one earbud will flash, indicating it's ready to pair.
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for available Bluetooth devices and select "iHome XT-59" from the list.
- Once connected, the earbud LED indicator will stop flashing. You will hear an audible confirmation.
Tip: If pairing fails, ensure the earbuds are charged and within 1 meter of your device. Try restarting both the earbuds and your device.
5. Operating Instructions
5.1 Power On/Off
- Power On: Open the charging case, or long-press the touch control area on both earbuds for 3 seconds.
- Power Off: Place the earbuds back into the charging case and close the lid, or long-press the touch control area on both earbuds for 5 seconds.
5.2 Music Playback (Touch Controls)
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Volume Up: Triple tap on the right earbud.
- Volume Down: Triple tap on the left earbud.
5.3 Call Management (Touch Controls)
- Answer/End Call: Single tap on either earbud.
- Reject Call: Long-press on either earbud for 2 seconds.
5.4 Voice Assistant
- Activate Voice Assistant: Long-press on either earbud for 2 seconds (when not on a call).
6. Maintenance
6.1 Cleaning
- Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Ensure charging contacts are clean and free of debris for optimal charging.
6.2 Storage
- When not in use, store the earbuds in their charging case to protect them and keep them charged.
- Store in a cool, dry place away from extreme temperatures and direct sunlight.
6.3 Water Resistance
The iHome XT-59 earbuds are water-resistant, making them suitable for workouts and outdoor activities. They are not waterproof and should not be submerged in water. Avoid exposure to saltwater, chlorinated water, or other liquids. If exposed to liquids, wipe them dry immediately.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Earbuds not pairing | Low battery; out of range; pairing mode not active | Charge earbuds and case; ensure device Bluetooth is on and within 10 meters; restart earbuds and device. |
| No sound | Volume too low; not connected; media paused | Increase device volume; check Bluetooth connection; tap earbud to play/pause. |
| One earbud not working | Low battery; not properly paired; charging contact issue | Ensure both earbuds are charged; try re-pairing; clean charging contacts. |
| Charging case not charging | Faulty cable/adapter; port obstruction | Try a different USB cable and power adapter; check USB port for debris. |
8. Specifications
- Model Name: iHome XT-59 True Wireless Earbuds
- Connectivity: Bluetooth Wireless
- Bluetooth Range: Up to 10 meters (33 feet)
- Battery Life: Up to 25 hours (with charging case)
- Control Method: Touch
- Noise Control: Sound Isolation
- Water Resistance: Water Resistant
- Microphone: Built-in
- Included Components: Charging Case, Ear Cushions, USB Charging Cable
- Dimensions: 1 x 1 x 1 inches (Earbuds)
- Item Weight: 7.7 ounces
9. Safety Information
- Do not disassemble, repair, or modify the product.
- Keep away from extreme temperatures, direct sunlight, and open flames.
- Avoid dropping or subjecting the earbuds to strong impacts.
- Do not use the product in environments where it could pose a safety hazard (e.g., driving, operating heavy machinery).
- Prolonged exposure to loud sounds may cause hearing damage. Adjust volume to a moderate level.
10. Warranty and Support
For warranty information and customer support, please refer to the official iHome website or contact their customer service directly. Keep your proof of purchase for warranty claims.
Website: www.ihome.com
