Brita 1042931
BRITA MAXTRA+ Water Filter Cartridges User Manual
Model: 1042931
1. Product Overview
The BRITA MAXTRA+ Water Filter Cartridges are designed to enhance the taste and quality of your tap water. These replacement cartridges are compatible with all BRITA jugs, partnership kettles, and Tassimo machines.
Key benefits include:
- Reduction of chlorine and other taste-impairing substances.
- Absorption of lead and copper.
- Reduction of limescale build-up, protecting appliances.
- Improved taste and appearance of hot and cold beverages, and food.
- Eco-friendly alternative to bottled water.

Image: BRITA MAXTRA+ filter cartridge in its packaging, indicating a 15-pack.

Image: A BRITA water filter jug with a MAXTRA+ filter, positioned next to a pile of discarded plastic bottles, illustrating the benefit of less waste.
2. Setup and First Use
Follow these steps for the initial setup and use of your BRITA MAXTRA+ filter cartridge:
- Prepare the Cartridge: Shake the new MAXTRA+ cartridge under water for approximately 20 seconds. This helps to remove any loose carbon particles and prepares the filter for optimal performance.
- Insert into Jug: Firmly insert the prepared cartridge into the funnel of your BRITA water filter jug. Ensure it is seated correctly to prevent unfiltered water from bypassing the filter.
- Initial Filtration: Fill the jug's funnel with cold tap water. Allow the water to filter through completely.
- Discard First Two Fills: For optimal filtration and to prime the cartridge, allow two full funnels of water to filter through and then discard this water. Do not consume the water from the first two filtrations.
- Ready for Use: After discarding the first two fills, your BRITA MAXTRA+ filter cartridge is ready for regular use.
3. Operating Instructions
Using your BRITA water filter jug with the MAXTRA+ cartridge is straightforward:
- Fill the jug's funnel with cold tap water.
- The water will slowly pass through the MAXTRA+ filter, undergoing the filtration process.
- Once filtered, the water is ready for consumption or use in beverages and cooking.

Image: A person pouring filtered water from a BRITA jug into an electric kettle, demonstrating use for hot beverages.

Image: Water being poured from a BRITA jug into a pot filled with fresh vegetables, highlighting its use for cooking.
4. Maintenance
Proper maintenance ensures the longevity and effectiveness of your BRITA MAXTRA+ filter cartridges:
- Cartridge Replacement: Each BRITA MAXTRA+ cartridge is designed to last approximately four weeks, or after filtering about 100 liters of water, depending on water hardness. Replace the cartridge regularly to maintain optimal filtration performance.
- Recycling: Used MAXTRA+ cartridges are recyclable. Please dispose of them responsibly at participating retailers or designated recycling points.

Image: A BRITA MAXTRA+ filter cartridge placed within a large blue recycling symbol, emphasizing its recyclability.
5. Troubleshooting
This section addresses common questions and minor issues you might encounter:
- Slow Filtration: If water filters very slowly, the cartridge might be clogged. Ensure the cartridge was properly shaken and primed during initial setup. If the issue persists, replace the cartridge.
- Black Particles in Water: Small black particles may appear in the water during the first few filtrations. These are harmless activated carbon particles from the filter. This is normal and why the first two fills should be discarded. If they persist after several filtrations, re-prime the cartridge or replace it.
- Water Taste Not Improved: Ensure the cartridge is correctly seated in the funnel, allowing no unfiltered water to bypass it. Also, verify that the cartridge is not past its recommended usage period (4 weeks).
6. Specifications
| Attribute | Detail |
|---|---|
| Model Number | 1042931 |
| Product Dimensions | 9.45 x 9.45 x 4.72 inches (24 x 24 x 12 cm) |
| Item Weight | 0.4 Kilograms (14.11 ounces) |
| Material | Plastic |
| Manufacturer | BRITA |
| Filter Lifespan | Approximately 4 weeks or 100 liters |
| Certifications | TUV (External Testing Certification) |
7. Warranty and Support
BRITA is committed to product quality and customer satisfaction.
- Replacement Parts: BRITA offers a free replacement parts program for selective components, including electronic timers found on some BRITA jugs. For details, please contact BRITA customer service.
- Customer Service: For further assistance, product inquiries, or to report any issues, please visit the official BRITA website or contact their customer support directly.
Note: Specific warranty terms for filter cartridges are generally limited to manufacturing defects upon purchase, given their consumable nature. Always refer to the latest information on the official BRITA website for comprehensive warranty details.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







