ZdalaMit RMT-AH500U

ZdalaMit RMT-AH500U Replacement Remote Control User Manual

For Sony Soundbar Models: HT-S350, HT-SD35, SA-WS350, SA-S350, SA-WSD35, SA-SD35

1. Introduction

This manual provides instructions for the ZdalaMit RMT-AH500U replacement remote control. This remote is designed to be fully compatible with various Sony Soundbar models, offering a direct replacement without the need for complex programming. Simply insert batteries, and the remote is ready for immediate use.

Compatible Sony Soundbar Models:

  • HT-S350
  • HT-SD35
  • SA-WS350
  • SA-S350
  • SA-WSD35
  • SA-SD35

2. Setup

2.1 Battery Installation

The RMT-AH500U remote control requires two (2) AAA alkaline batteries for operation. Batteries are not included with the remote control.

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards or outwards to open it.
  3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Slide the battery compartment cover back into place until it clicks securely.

Note: No programming or pairing is required. Once batteries are installed, the remote is ready for use with your compatible Sony Soundbar.

ZdalaMit RMT-AH500U Remote Control front view

Image 1: Front view of the RMT-AH500U remote control, showing button layout.

3. Operating Instructions

To operate your Sony Soundbar with the RMT-AH500U remote control, ensure there is a clear line of sight between the remote's infrared emitter and the soundbar's receiver. Point the remote directly at the soundbar.

3.1 Button Functions

The remote control features 16 buttons, each designed for specific functions on your Sony Soundbar. Below is a general overview of common button functions:

ZdalaMit RMT-AH500U Remote Control angled view

Image 2: Angled view of the RMT-AH500U remote control, highlighting ergonomic design.

  • Power Button (Green): Turns the soundbar on or off.
  • TV: Switches the soundbar input to TV audio.
  • BLUETOOTH: Activates Bluetooth pairing mode or switches to Bluetooth input.
  • CINEMA: Selects Cinema sound mode for an immersive audio experience.
  • AUTO SOUND: Enables automatic sound optimization based on content.
  • MUSIC: Selects Music sound mode.
  • VOICE: Enhances vocal clarity.
  • NIGHT: Activates Night mode for reduced dynamic range, ideal for late-night viewing.
  • Volume (+/-): Adjusts the main volume level of the soundbar.
  • Mute: Mutes or unmutes the soundbar audio.
  • SW (+/-): Adjusts the subwoofer volume level.
  • AUDIO: Cycles through various audio settings or inputs.
  • GAME: Selects Game sound mode.
  • NEWS: Selects News sound mode, often enhancing dialogue.
  • SPORTS: Selects Sports sound mode.
  • STANDARD: Reverts to standard sound mode.
  • SECURE LINK: (Specific function may vary by soundbar model, often related to secure connections).
  • INDICATORS: (Specific function may vary, possibly for status display).

Refer to your Sony Soundbar's original manual for detailed explanations of specific sound modes and advanced functions.

4. Maintenance

4.1 Cleaning

To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners, abrasive pads, or chemical solvents, as these can damage the remote's surface or internal components.

4.2 Battery Replacement

Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.

4.3 Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the remote.

5. Troubleshooting

ProblemPossible CauseSolution
Remote not workingDead or incorrectly installed batteries.Check battery orientation. Replace with new AAA alkaline batteries.
Remote works intermittentlyWeak batteries. Obstruction between remote and soundbar.Replace batteries. Ensure clear line of sight to the soundbar's sensor.
Specific buttons not respondingButton malfunction or soundbar incompatibility for that specific function.Ensure the button function is supported by your specific soundbar model. Try replacing batteries. If issue persists, contact support.

6. Specifications

ZdalaMit RMT-AH500U Remote Control top-down view

Image 3: Top-down view of the RMT-AH500U remote control, showing all buttons clearly.

  • Brand: ZdalaMit
  • Model: RMT-AH500U
  • Power Supply: 2 x 1.5V AAA Alkaline Batteries (not included)
  • Connectivity Technology: Infrared
  • Maximum Range: 10 Meters (approx. 33 feet)
  • Button Quantity: 16
  • Compatible Devices: Sony Soundbar models HT-S350, HT-SD35, SA-WS350, SA-S350, SA-WSD35, SA-SD35
  • Dimensions (L x W x H): 6.35" x 1.39" x 0.55" (16.13 cm x 3.53 cm x 1.40 cm)
  • Item Weight: 40 Grams (approx. 1.41 ounces)
  • Special Feature: Ergonomic design

7. Warranty Information

This ZdalaMit RMT-AH500U replacement remote control comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use. Please retain your proof of purchase for warranty claims.

8. Support

If you encounter any issues or have questions regarding the ZdalaMit RMT-AH500U replacement remote control that are not addressed in this manual, please contact the seller or manufacturer directly for assistance. Provide your product model number (RMT-AH500U) and details of your issue for efficient support.

© 2026 ZdalaMit. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.