1. Introduction
Thank you for choosing the Cecotec Ready Warm 6600 Ceramic Style Smart Heater. This ceramic heater is designed to provide efficient and comfortable heating for your indoor spaces. It features a powerful 2000W output, an intuitive LED display, remote control operation, multiple heating modes, an 8-hour timer, and an oscillation function for even heat distribution. For your safety and optimal performance, please read this manual thoroughly before use and retain it for future reference.
Figure 1: Cecotec Ready Warm 6600 Ceramic Style Smart Heater
2. Safety Information
Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury. This heater is equipped with a triple safety system for enhanced protection.
- Read all instructions: Before operating the heater, read all instructions carefully.
- Proper Placement: Place the heater on a firm, level surface. Ensure it is at least 1 meter (3 feet) away from walls, furniture, curtains, and other combustible materials. Do not place it on soft surfaces like beds or carpets where openings may be blocked.
- Indoor Use Only: This heater is designed for indoor use only. Do not use it outdoors or in damp environments like bathrooms or laundries.
- Power Supply: Connect the heater to a grounded electrical outlet with the correct voltage (220 Volts). Do not overload the circuit.
- Avoid Extension Cords: Do not use extension cords or power strips with this heater. Plug it directly into a wall outlet.
- Supervision: Do not leave the heater unattended while in operation. Keep children and pets away from the heater.
- Do Not Cover: Never cover the heater or block its air inlets/outlets. This can lead to overheating and fire.
- Triple Safety System: The heater includes an automatic tip-over switch, overheat protection, and a protective grille to prevent fingers from entering the heater. If the heater tips over or overheats, it will automatically shut off.
- Maintenance: Unplug the heater before cleaning or performing any maintenance.
- Damaged Cord/Plug: Do not operate the heater with a damaged cord or plug. If the cord is damaged, it must be replaced by the manufacturer or a qualified service agent.
3. Product Features
The Cecotec Ready Warm 6600 Ceramic Style Smart Heater is equipped with several features designed for efficient and user-friendly operation:
- High Power Output: Features a powerful 2000W ceramic heating element for rapid room heating.
- LED Display: An intuitive front LED screen displays the current room temperature and allows for selection of various functions.
- Remote Control: Offers convenient and intelligent control of all heater functions from a distance.
- Three Operating Modes: Includes Fan mode (ventilation only), Low mode (1000W reduced consumption), and High mode (2000W maximum consumption).
- LED Indicator Lights: The control panel features LED lights to visually indicate the selected operating mode.
- 8-Hour Timer: Allows you to set the desired operating time for up to 8 hours, with the setting displayed on the LED screen.
- 90° Oscillation: Capable of oscillating up to 90 degrees to distribute heat more evenly throughout the room.
- Triple Safety System: Incorporates an automatic tip-over switch, overheat protection, and a protective grille for complete safety.
Figure 2: Heater in a typical room setting
4. Package Contents
Upon opening the package, please ensure all items are present and in good condition:
- Cecotec Ready Warm 6600 Ceramic Style Smart Heater
- Remote Control
- Instruction Manual
If any items are missing or damaged, please contact Cecotec customer support immediately.
5. Setup
Follow these steps to set up your heater:
- Unpack: Carefully remove the heater and all accessories from the packaging. Retain the packaging for future storage or transport.
- Placement: Place the heater on a stable, flat, and heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater to allow for proper airflow and prevent fire hazards. Do not place it directly under a power outlet.
- Power Connection: Ensure the heater is switched off before plugging it into a standard 220V AC electrical outlet. The power cord should be fully extended and not tangled.
6. Operating Instructions
The Cecotec Ready Warm 6600 can be operated using the control panel on top of the unit or the included remote control.
Control Panel
Figure 3: Interacting with the control panel
The control panel features several buttons and an LED display:
- Power Button (☯): Press to turn the heater ON or OFF.
- Mode Button: Cycles through the operating modes: Fan, Low (1000W), High (2000W).
- Timer Button: Sets the operating timer from 1 to 8 hours. Each press increases the time by one hour.
- Oscillation Button: Activates or deactivates the 90° oscillation function.
- Temperature Adjustment Buttons (+/-): Adjusts the desired temperature setting.
Figure 4: LED Display showing temperature
Remote Control
Figure 5: Remote Control
The remote control duplicates the functions of the control panel, allowing for convenient operation from a distance. Ensure the remote control has working batteries (not included, typically AAA batteries).
- Power Button: Turns the heater ON/OFF.
- Mode Button: Selects operating modes (Fan, Low, High).
- Timer Button: Sets the timer.
- Oscillation Button: Controls the oscillation function.
- Temperature Buttons: Adjusts the temperature.
Operating Modes
- Fan Mode: Operates as a fan, circulating air without heat. Ideal for cooling or air circulation.
- Low Mode (1000W): Provides a lower heat output, suitable for maintaining warmth or heating smaller spaces with reduced energy consumption.
- High Mode (2000W): Delivers maximum heat output for rapid heating of larger rooms.
7. Maintenance
Regular maintenance ensures the longevity and efficient operation of your heater.
- Cleaning: Always unplug the heater and allow it to cool completely before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Dust Removal: Use a vacuum cleaner with a brush attachment to gently remove dust from the air intake and outlet grilles. Do not insert any objects into the grilles.
- Storage: If storing the heater for an extended period, clean it thoroughly and place it back in its original packaging. Store in a cool, dry place.
- No User Serviceable Parts: This heater contains no user-serviceable parts. Do not attempt to disassemble or repair the unit yourself. Contact qualified service personnel for any repairs.
8. Troubleshooting
If you encounter issues with your heater, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply. Tip-over switch activated. Overheat protection activated. | Ensure the power cord is securely plugged into a working outlet. Place the heater on a flat, stable surface. Unplug the heater, allow it to cool for 30 minutes, then plug it back in. Clear any obstructions. |
| No heat output. | Heater is in Fan mode. Temperature setting is too low. | Select Low or High heating mode. Increase the desired temperature setting. |
| Oscillation not working. | Oscillation function is off. | Press the oscillation button on the control panel or remote control to activate it. |
| Heater emits unusual smell. | New product smell. Dust accumulation. | This is normal for new heaters and will dissipate after initial use. Unplug and clean the heater as per maintenance instructions. |
If the problem persists after trying these solutions, please contact Cecotec customer support.
9. Specifications
Technical specifications for the Cecotec Ready Warm 6600 Ceramic Style Smart Heater:
| Attribute | Value |
|---|---|
| Brand | Cecotec |
| Model Number | 05378 |
| Color | White |
| Product Dimensions (L x W x H) | 44.5 x 16.5 x 20.7 cm |
| Weight | 2.4 Kilograms |
| Power | 2000 Watts |
| Voltage | 220 Volts |
| Material | Various Materials |
| Automatic Shut-off Function | Yes (Tip-over protection, Overheat protection) |
| Number of Speeds/Modes | 3 (Fan, Low, High) |
| Special Features | Digital Display, Oscillating, Tip-over Protection, Overheat Protection, Remote Control |
| Form Factor | Tower |
| Indoor/Outdoor Use | Indoor |
| Power Source | Electric |
| Heating Method | Radiant |
| Recommended Uses | Indoor Use |
| Mounting Type | Floor Mount |
10. Warranty and Support
Cecotec products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Cecotec website. For technical support, troubleshooting assistance, or spare parts availability, please contact Cecotec customer service through their official channels.
Spare Parts Availability: 10 Years
