iMICE E1300-BT Dual Mode Wireless Mouse User Manual

1. Introduction

This manual provides instructions for the iMICE E1300-BT Dual Mode Wireless Mouse. This device offers flexible connectivity options, allowing it to connect to computers and other devices via both 2.4GHz wireless technology and Bluetooth 5.2. It features a rechargeable battery, silent click buttons, adjustable DPI settings, and an ergonomic design for comfortable use.

Figure 1: iMICE E1300-BT Dual Mode Wireless Mouse

2. Product Overview

The iMICE E1300-BT mouse is designed for versatility and user comfort. Key features include:

• Dual Mode Connectivity: Supports both Bluetooth 5.2 and 2.4GHz wireless connections.
• Rechargeable Battery: Built-in battery eliminates the need for disposable batteries.
• Silent Click Buttons: Reduces operational noise for a quiet environment.
• Adjustable DPI: Three sensitivity levels (800/1200/1600 DPI) for precise control.
• Ergonomic Design: Slim and portable for comfortable use and easy transport.
• LED Backlight: Features a colorful breathing light effect.

Components and Button Functions

Figure 2: Mouse Button Functions and Components

• Left Click Button: Standard left mouse button function.
• Right Click Button: Standard right mouse button function.
• Scroll Wheel: For scrolling through documents and web pages.
• DPI Button: Cycles through DPI sensitivity settings.
• Micro Charging Port: Used to recharge the mouse battery.
• Power and Mode Switch: Toggles power ON/OFF and switches between 2.4GHz and Bluetooth modes.
• Receiver Slot: Stores the 2.4GHz USB receiver when not in use.

3. Setup Instructions

3.1. 2.4GHz Wireless Mode

1. Locate the Power and Mode Switch on the underside of the mouse.
2. Slide the switch to the '2.4G' position (typically to the right). A red indicator light will briefly illuminate, then turn off.
3. Remove the USB receiver from its storage slot on the mouse's underside.
4. Insert the USB receiver into an available USB port on your computer or laptop.
5. The computer should automatically detect and install the necessary drivers. The mouse is ready for use in 2.4GHz mode.

Figure 3: 2.4GHz Wireless Connection Setup

3.2. Bluetooth Mode

1. Ensure your device's Bluetooth function is enabled. The USB receiver is not required for Bluetooth mode.
2. Locate the Power and Mode Switch on the underside of the mouse.
3. Slide the switch to the 'BT' position (typically to the left). A red indicator light will briefly illuminate, then turn off.
4. The blue indicator light on the mouse will begin to flash, indicating it is in pairing mode.
5. On your device, navigate to Bluetooth settings.
6. Search for available Bluetooth devices. The mouse will appear as "BT5.2 Mouse".
7. Select "BT5.2 Mouse" to pair. Once paired, the blue light will stop flashing, and the mouse is ready for use in Bluetooth mode.

Figure 4: Bluetooth Mode Overview

4. Operating Instructions

4.1. DPI Adjustment

The mouse features three adjustable DPI (Dots Per Inch) settings to control cursor sensitivity and speed. Press the DPI button, located on the top of the mouse, to cycle through the available settings: 800 DPI, 1200 DPI, and 1600 DPI. Select the sensitivity that best suits your task, whether for general browsing, design work, or gaming.

Figure 5: Adjustable DPI Settings

4.2. Silent Click Feature

The left and right mouse buttons are designed for silent operation, minimizing clicking noise. This feature is beneficial in quiet environments such as offices, libraries, or during late-night use.

Figure 6: Silent Click Feature

4.3. Power Saving Mode

To conserve battery life, the mouse automatically enters a sleep mode after 8 minutes of inactivity. To wake the mouse, simply press any button.

4.4. LED Backlight

The mouse features a colorful breathing LED backlight. While aesthetically pleasing, turning off the LED light when not in use can help extend battery life. There is no specific button to control the LED, but it will turn off in sleep mode.

Figure 7: Colorful Breathing Light Effect

5. Charging Instructions

The iMICE E1300-BT mouse is equipped with a built-in rechargeable battery. When the mouse cursor moves slowly or stops moving, it indicates a low battery and requires charging.

• Connect the included Micro USB cable to the Micro Charging Port on the front of the mouse.
• Connect the other end of the USB cable to a computer's USB port or a standard USB wall adapter (5V/1A recommended).
• A red light located beside the scroll wheel will illuminate during charging.
• The red light will turn off once the mouse is fully charged.
• A full charge typically takes approximately 2 hours.
• Important Note: Do not charge the mouse with a mobile phone charger that outputs higher voltage or current than recommended, as this may damage the battery.

6. Compatibility

The iMICE E1300-BT mouse offers broad compatibility with various operating systems and devices:

• 2.4GHz Mode: Compatible with laptops, desktops, and any device equipped with a USB port. Simply plug in the USB receiver for immediate use.
• Bluetooth Mode: Compatible with Windows (8/10 and above), Android (5.0 and above), iOS (13 and above), and Mac OS (X 10.10 and above) systems. Requires a Bluetooth adapter of Bluetooth 4.0 or above.

Note: Not all computers support both 2.4GHz and Bluetooth modes simultaneously or interchangeably without manual switching.

7. Troubleshooting

• Mouse Cursor Moves Slowly or Stops: This typically indicates a low battery. Please recharge the mouse as per the charging instructions in Section 5.
• Mouse Not Connecting in 2.4GHz Mode:
  • Ensure the Power and Mode Switch is set to '2.4G'.
  • Verify the USB receiver is securely plugged into a working USB port.
  • Try plugging the receiver into a different USB port.
• Mouse Not Connecting in Bluetooth Mode:
  • Ensure the Power and Mode Switch is set to 'BT'.
  • Confirm Bluetooth is enabled on your device.
  • Ensure the mouse is in pairing mode (blue light flashing). If not, toggle the switch off and on again.
  • Remove any previous pairings of "BT5.2 Mouse" from your device's Bluetooth settings and attempt to pair again.
  • Ensure your device supports Bluetooth 4.0 or higher.
• LED Light Flickers or is Inconsistent: While the LED has a breathing effect, if it appears to malfunction, ensure the mouse is fully charged. If the issue persists, it may indicate a hardware anomaly.

8. Specifications

9. Warranty and Support

For any questions, technical assistance, or warranty inquiries regarding your iMICE E1300-BT Dual Mode Wireless Mouse, please refer to the seller's contact information or the platform where the product was purchased. Support is typically available to assist with product-related issues.