1. Introduction
Thank you for choosing the Lepro LED Security Light. This ultra-bright, motion-activated outdoor floodlight is designed to provide enhanced security and illumination for your yard, porch, garage, and other outdoor areas. This manual provides detailed instructions for the installation, operation, and maintenance of your new security light.
Key Features:
- Ultra-Bright & Energy Efficient: Produces up to 3200 Lumens at only 27 Watts, saving 86% on electricity compared with 200W halogen bulbs.
- Motion Sensor Security Light: Stays off during daytime and auto lights up at night when motion is detected. Detects moving human or animals from up to 72ft within 180° detection angle.
- 270° Wide Lighting: Three adjustable LED light heads and a sensor head for illuminating larger areas.
- Flexible Settings: Adjustable lighting time (30s/60s/120s) and sensing range (Low/Medium/High).
- Durable & Reliable: IP65 waterproof rating, certified by ETL FCC, designed to withstand extreme weather.
2. Setup
What's in the Box:
- Lepro LED Security Light (1 unit)
- EVA Gasket (1)
- Machine Screws (2)
- Wire Nuts (3)
- Rings (2)
- Mounting accessories (included)
- Note: Junction box not included.
Installation Guide:
Please ensure power is turned off at the circuit breaker before beginning installation. It is recommended to install the light at a height of 6.5-10 feet for optimal coverage.
- Prepare Wiring: Connect the light's black wire to the hot wire, white wire to the neutral wire, and green/yellow wire to the earth wire from your electrical box. Secure connections with wire nuts.
- Mount the Fixture: Secure the light fixture to the wall using the provided machine screws and gasket. Ensure a stable and secure mount.
- Adjust Light Heads: The three LED light heads can be adjusted vertically (90°) and horizontally (180° for outer heads, 300° for center head). The sensor head can also be adjusted (180°). Make sure the sensor head faces the ground for proper operation and protection against water damage. Maintain at least 1 inch space between the LED heads and the sensor head.
- Positioning Considerations: Do not mount the fixture near a heat source, reflective object, or other nearby light source within 5 feet, as this may interfere with the motion sensor's performance.
Figure 2.1: Wiring connections for the security light.
Figure 2.2: Adjustable light heads and sensor for wide coverage.
Figure 2.3: Motion detection range and recommended installation height.
3. Operating Instructions
Motion Sensor Functionality:
The Lepro LED Security Light is equipped with a PIR motion sensor. During the daytime, the light remains off. At night, it automatically illuminates when motion is detected within its 180° detection angle, up to 72 feet away. The light will turn off after a set duration if no further motion is detected.
Figure 3.1: Automatic operation based on light conditions and motion.
Adjusting Settings:
The light features two adjustable knobs on the sensor for customizing its behavior:
- Time Setting: This knob controls how long the light stays on after motion is detected. Options include 30 seconds, 60 seconds, and 120 seconds. There is also a "Test" mode which keeps the light on for approximately 5 seconds for easy adjustment during installation.
- Sensitivity Setting: This knob adjusts the detection range of the motion sensor. Options include Low (L), Medium (M), and High (H), corresponding to detection ranges of approximately 26ft, 49ft, and 72ft respectively.
Figure 3.2: Controls for time and sensitivity adjustments.
Product Overview Video:
Video 3.1: An overview of the Lepro LED Security Light, demonstrating its flexible design, motion activation, brightness, adjustable settings, and weather resistance.
4. Maintenance
The Lepro LED Security Light is designed for minimal maintenance. To ensure optimal performance and longevity:
- Cleaning: Periodically wipe the light fixture and sensor lens with a soft, damp cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Weather Resistance: The light is IP65 waterproof (LED Head) and IP44 (Sensor Head), making it suitable for outdoor use in various weather conditions, including rain and snow.
- Inspection: Regularly inspect the wiring and mounting for any signs of wear or damage. If any issues are found, consult a qualified electrician.
Figure 4.1: The light is built to be heat, water, and frost resistant.
5. Troubleshooting
Refer to the table below for common issues and their solutions:
| Problem | Problem Cause | Corrective Action |
|---|---|---|
| Light does not switch on at night when motion is detected |
|
|
| Security light switch on during the day | The sensor is in a shaded area and is fooled into thinking it is nighttime. |
|
| The Light flashes | There is lighting, arc welding, mobile sources or other such unstable light | Avoid irradiating by such a light source. |
Figure 5.1: Visual representation of the troubleshooting guide.
6. Specifications
| Attribute | Value |
|---|---|
| Brand | Lepro |
| Model Name | 650002-DW-US |
| Color | Black |
| Material | Plastic, Aluminum |
| Light Source Type | LED |
| Wattage | 27 Watts |
| Brightness | 3200 Lumens |
| Voltage | 120 Volts (AC) |
| Product Dimensions | 12.91"L x 7.17"W x 5.24"H |
| Water Resistance Level | IP65 (LED Head), IP44 (Sensor Head) |
| Detection Angle | 180° |
| Max Detection Range | 72 ft |
| Number of Light Sources | 3 |
| Installation Type | Flush Mount |
| Certifications | ETL, FCC |
7. Warranty and Support
This Lepro LED Security Light comes with a 1-year manufacturer's limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact Lepro customer service. Refer to the official Lepro website or your purchase documentation for the most current contact information.
You can also find the official User Manual in PDF format for this product here.
