1. Introduction
The FLAMMA FS06 Digital Preamp Pedal is a compact guitar effects pedal designed to provide a wide range of amplifier tones. It features 7 distinct preamp models, built-in cabinet simulation, and the ability to save custom presets. This manual provides detailed instructions for setting up, operating, and maintaining your FS06 pedal.
Image 1.1: The FLAMMA FS06 Digital Preamp Pedal.
2. Package Contents
- FLAMMA FS06 Digital Preamp Pedal
- Quick Guide
- FLAMMA Logo Sticker
Image 2.1: Contents of the FLAMMA FS06 package.
3. Setup and Connections
3.1 Power Supply
The FS06 pedal requires a 9V DC power supply with a current output of more than 303mA. The power supply is not included. Ensure the correct polarity and sufficient current to prevent operational issues.
3.2 Connecting Your Pedal
The FS06 can be integrated into various audio setups:
- To a Guitar Amplifier's Power Amp: Connect the pedal's output to the power amp input of your guitar amplifier.
- Direct to a Power Amplifier: Connect the pedal's output directly to a dedicated power amplifier.
- To an Audio Interface/Headphone Amplifier/Monitor Speaker/Mixer: Utilize the built-in cabinet simulation by connecting the pedal's output directly to these devices.
Image 3.1: Input jack of the FS06 pedal.
Image 3.2: Output jack of the FS06 pedal.
Image 3.3: FS06 connected to a mixer, utilizing cabinet simulation.
4. Operation
4.1 Controls Overview
The FS06 pedal features several knobs and a footswitch for tone shaping and preset management:
- BASS: Adjusts the low-frequency response.
- MID: Adjusts the middle-frequency response.
- TRE (Treble): Adjusts the high-frequency response.
- LEVEL: Controls the overall output volume.
- GAIN: Adjusts the amount of overdrive/distortion.
- SAVE SELECT Button: Used to select preamp models and save presets.
- Footswitch: Toggles the pedal on/off or switches between preamp channels, depending on the selected mode.
Image 4.1: Control knobs and their functions.
Image 4.2: Footswitch functionality.
4.2 Preamp Models
The FS06 offers 7 distinct preamp models, each designed to emulate classic and modern guitar amplifier tones. An LED indicator shows the currently selected effect.
| Number | Name | Amp Model Basis |
|---|---|---|
| 1 | DELUXEBLUE | Based on Fender® Blues Deluxe |
| 2 | AC31 | Based on Vox® AC30 |
| 3 | CORAL REEF | Based on Two Rock® Coral |
| 4 | PLEX 50 | Based on Marshall® Plexi 50 |
| 5 | BLUE EYE 100 | Based on Friedman® BE-100 |
| 6 | MB 5th Gen | Based on Mesa Boogie® MARK V |
| 7 | HVE 5151 | Based on EVH® 5150 |
Image 4.3: Overview of the 7 preamp models.
4.3 Saving Presets
Each preamp model has two channels, allowing you to save a unique preset for each. To save your settings:
- Select your desired preamp model using the SAVE SELECT button.
- Adjust the BASS, MID, TRE, LEVEL, and GAIN knobs to your preferred settings.
- Press and hold the SAVE SELECT button until the LED indicator flashes, confirming the preset has been saved to the current channel.
This allows you to recall your customized tones instantly during performance or practice.
5. Maintenance
To ensure the longevity and optimal performance of your FLAMMA FS06 pedal, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
- Storage: Store the pedal in a dry environment, away from extreme temperatures, direct sunlight, and high humidity.
- Handling: Handle the pedal with care. Avoid dropping it or subjecting it to strong impacts.
- Power: Always disconnect the power supply when the pedal is not in use for extended periods.
6. Troubleshooting
6.1 No Sound or Weak Signal
- Check Power Supply: Ensure the pedal is connected to a 9V DC power supply with sufficient current (over 303mA). Insufficient current can lead to improper operation or no sound.
- Cable Connections: Verify all audio cables are securely connected to the input and output jacks.
- Volume/Level Settings: Check the LEVEL knob on the pedal and the volume settings on your amplifier or audio interface.
- Bypass Mode: If the pedal is in bypass mode, ensure your amplifier or other effects are functioning correctly.
6.2 Unexpected Behavior
- Power Cycle: Disconnect and reconnect the power supply to reset the pedal.
- Factory Reset: Refer to the official FLAMMA website or contact support for instructions on performing a factory reset if issues persist.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | FS06 |
| Item Weight | 10.5 ounces (0.3 Kilograms) |
| Product Dimensions | 2.75 x 1.97 x 4.78 inches (7 x 5 x 12.1 cm) |
| Material Type | Metal |
| Power Source | Corded Electric |
| Voltage | 9 Volts DC |
| Signal Format | Digital |
| Hardware Interface | 1/4-inch Audio |
| Preamp Models | 7 |
| Saveable Presets | Yes (2 channels per preamp model) |
| Cabinet Simulation | Built-in |
8. Warranty and Support
For warranty information, technical support, or further inquiries, please visit the official FLAMMA website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
FLAMMA Official Website: Visit the FLAMMA Store on Amazon
