Roca Stonex Aquos Series Drain Cover User Manual

1. Introduction

This manual provides essential information for the proper installation, use, and maintenance of your Roca Stonex Aquos Series Drain Cover, Model A276356100. Please read these instructions carefully before proceeding to ensure optimal performance and longevity of the product.

1.1 Product Overview

The Roca Stonex Aquos Series Drain Cover is designed to seamlessly integrate with compatible Roca Aquos shower trays. Its primary function is to cover the drain opening, providing an aesthetic finish while allowing efficient water drainage. Constructed from durable Stonex material, it offers resistance and a smooth surface.

1.2 Package Contents

• 1 x Roca Stonex Aquos Series Drain Cover (Model A276356100)

2. Safety Information

Observe the following safety precautions to prevent injury or damage to the product:

• Handle the drain cover with care to avoid dropping or impacting hard surfaces, which could cause chipping or breakage.
• Ensure the drain cover is correctly and securely seated in its designated position to prevent it from shifting, which could create a tripping hazard.
• Keep the product out of reach of children during installation and when not properly installed.
• Do not use abrasive cleaning agents, harsh chemicals, or scouring pads, as these can permanently damage the Stonex surface finish.

3. Installation (Setup)

Follow these steps for proper installation of the drain cover:

3.1 Preparation

1. Ensure the shower tray drain area is thoroughly clean and free of any debris, dust, or foreign objects.
2. Verify that your shower tray is a compatible Roca Aquos Series model for this specific drain cover (A276356100).

3.2 Placement

1. Carefully align the drain cover with the designated recess located over the shower tray's drain opening.
2. Gently lower the cover into place, ensuring it sits flush and level with the surrounding shower tray surface.
3. Apply light, even pressure across the cover if necessary to ensure a secure and stable fit. Avoid forcing the cover into place.

3.3 Verification

1. After placement, check that the cover is stable and does not rock, shift, or lift easily.
2. Ensure that water can flow freely around and through the design of the cover into the drain.

4. Usage

The Roca Stonex Aquos Series Drain Cover is designed for passive function within your shower system. Once installed, it requires no active operation.

• The cover allows water to pass into the drain while concealing the drain opening for a clean aesthetic.
• It is suitable for regular shower use.
• Avoid placing heavy or sharp objects directly on the drain cover to prevent potential damage to the surface or structure.

5. Maintenance and Cleaning

Proper maintenance ensures the longevity and appearance of your drain cover.

5.1 Regular Cleaning

• Clean the drain cover regularly with a soft cloth or sponge and a mild, non-abrasive soap or a specialized cleaner recommended for Stonex surfaces.
• Rinse thoroughly with clean water after cleaning to remove all soap residue.
• Dry the surface with a soft cloth to prevent water spots.

5.2 Stubborn Stains

• For more stubborn stains, consult Roca's official cleaning guidelines for Stonex products, which can typically be found on their website.
• Do not use: harsh chemicals, abrasive cleaning pads, acidic cleaners, or solvents, as these can cause irreversible damage to the Stonex material and finish.

5.3 Removal for Deep Cleaning

• The drain cover can be carefully lifted from its recess to allow for deeper cleaning of the drain area beneath.
• After cleaning, reinstall the cover by following the steps outlined in the "Installation" section.

6. Troubleshooting

If you encounter issues with your drain cover, refer to the following common problems and solutions:

• Problem: The drain cover does not sit flush with the shower tray surface.
  Solution: Check for any debris (e.g., hair, soap residue, small objects) in the recess of the shower tray or on the underside of the cover. Ensure the shower tray model is indeed compatible with this specific drain cover (A276356100).
• Problem: Water is pooling around the drain cover or draining slowly.
  Solution: First, verify that the drain itself is not clogged. Remove the cover and check the drain opening for obstructions. Ensure the cover is correctly seated and not obstructing water flow channels. Clean any accumulated soap scum or hair from the edges of the cover and the drain opening.
• Problem: Surface discoloration or visible damage to the cover.
  Solution: Review your cleaning methods and ensure only recommended cleaners for Stonex surfaces are being used. Avoid any abrasive materials. If the damage persists or is significant, contact Roca customer support for further assistance.

7. Specifications

8. Warranty and Support

For detailed warranty information, terms, and conditions, please refer to the official Roca website or the documentation provided at the time of purchase. In case of product defects or for technical assistance, please contact your local Roca dealer or Roca customer support.

Always retain your purchase receipt as proof of purchase for any warranty claims.