WizKids D&D Nolzur's Marvelous Miniatures: Frost Salamander Instruction Manual

1. Introduction

This manual provides instructions for the WizKids D&D Nolzur's Marvelous Miniatures: Frost Salamander. This unpainted miniature is designed for hobbyists to customize and use in tabletop role-playing games. It comes pre-primed and ready for painting.

Image: Front view of the unpainted Frost Salamander miniature.

The Frost Salamander is a creature from the Dungeons & Dragons universe, known for its icy breath and formidable presence. This miniature allows you to bring this creature to life on your gaming table with your own unique paint scheme.

2. Setup and Preparation

Your WizKids D&D Nolzur's Marvelous Miniatures: Frost Salamander comes ready for immediate preparation and painting. No assembly is required.

2.1 Unboxing and Inspection

1. Carefully remove the miniature from its packaging.
2. Inspect the miniature for any manufacturing defects or damage.
3. Ensure all parts are present. This model is a single piece.

Image: Rear view of the product packaging, showing product details and warnings.

2.2 Cleaning (Optional)

While the miniature is pre-primed, a light cleaning can help ensure optimal paint adhesion. Use a soft brush and mild soapy water to gently clean the surface, then rinse thoroughly and allow to air dry completely before proceeding.

2.3 Priming

The Frost Salamander miniature is pre-primed, meaning it has a base coat ready for painting. Additional priming is generally not necessary unless you wish to apply a different color primer or a very thin coat of your preferred primer for specific effects.

Image: A dynamic front view of the unpainted Frost Salamander, showcasing its details.

3. Painting Guide

This section provides a basic guide to painting your Frost Salamander miniature. Experimentation is encouraged to achieve your desired look.

3.1 Recommended Tools and Materials

• Acrylic paints designed for miniatures
• Various sizes of paint brushes (fine detail, base coating)
• Palette for mixing paints
• Water pot for cleaning brushes
• Paper towels or cloth for drying brushes
• Optional: Varnish (matte or gloss) for protection

3.2 Basic Painting Steps

1. Base Coating: Apply a thin, even coat of your chosen base color to each section of the miniature. Multiple thin coats are better than one thick coat to preserve detail.
2. Shading: Apply a darker wash or thinned dark paint into the recesses of the miniature to create shadows and depth.
3. Layering/Highlighting: Apply lighter shades of your base colors to raised areas and edges to create highlights and define features.
4. Detailing: Paint fine details such as eyes, teeth, and claws.
5. Basing: Paint the base of the miniature to complement your paint scheme or terrain.
6. Varnishing (Optional): Once completely dry, apply a protective varnish to seal the paint and protect the miniature from wear and tear.

Image: A side-by-side comparison showing the unpainted miniature next to a fully painted example, demonstrating potential customization.

Image: Side view of the unpainted Frost Salamander, useful for planning paint application on its body and tail.

4. Maintenance and Care

Proper care will ensure the longevity of your painted miniature.

4.1 Cleaning

To clean dust from your miniature, use a soft, dry brush (such as a makeup brush or a dedicated miniature brush). For stubborn dirt, a slightly damp cloth can be used, but avoid harsh chemicals or excessive moisture, especially if the miniature is not varnished.

4.2 Storage

Store your miniature in a cool, dry place away from direct sunlight, which can cause paint to fade over time. Consider using a foam-lined carrying case or display cabinet to protect it from physical damage.

5. Troubleshooting

Here are solutions to common issues you might encounter:

• Paint not adhering: Ensure the miniature is clean and dry. Apply thin coats of paint. If issues persist, re-prime the miniature with a quality primer.
• Paint appears clumpy or thick: Thin your paints with a small amount of water or a dedicated paint thinner. Apply multiple thin coats instead of one thick one.
• Miniature breaks: Small breaks can often be repaired using super glue (cyanoacrylate adhesive). Apply sparingly and hold pieces together until set.
• Fading paint: This is often caused by prolonged exposure to direct sunlight. Store miniatures away from windows or in opaque containers.

6. Specifications

7. Support and Additional Resources

For further information, painting tutorials, or to explore other WizKids products, please visit the official WizKids website or their brand store.

• Official WizKids Website: wizkids.com/unpainted
• WizKids Brand Store on Amazon: WizKids Store