1. Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your LG 32GN650-B Ultragear Gaming Monitor. Designed for an enhanced gaming experience, this 32-inch QHD (2560 x 1440) display features a 165Hz refresh rate, 1ms Motion Blur Reduction (MBR), HDR10 support, sRGB 95% color gamut, and AMD FreeSync technology. Its virtually borderless design and adjustable stand offer both aesthetic appeal and ergonomic flexibility.
2. Package Contents
Verify that all items listed below are included in your product box:
- LG 32GN650-B Ultragear Gaming Monitor
- Monitor Stand (Base and Neck)
- Power Cord
- Instruction Manual (this document)
- Warranty Card
- DisplayPort Cable
3. Setup
3.1. Stand Assembly
Carefully remove the monitor and stand components from the packaging. Attach the stand neck to the monitor panel, ensuring it clicks securely into place. Then, attach the stand base to the neck using the provided screw, tightening it by hand or with a coin.
Figure 3.1: Front view of the LG 32GN650-B monitor with its assembled stand.
Figure 3.2: Monitor dimensions, showing height, width, and depth with the stand.
3.2. Connecting Cables
Connect the power cord to the monitor and a power outlet. Use the supplied DisplayPort cable to connect your computer's graphics card to the monitor's DisplayPort input for optimal performance (165Hz refresh rate, QHD resolution). Alternatively, you can use an HDMI cable for compatible devices. The monitor features two HDMI inputs and one DisplayPort input.
Figure 3.3: Rear view of the monitor, highlighting the input ports including DisplayPort and HDMI.
Figure 3.4: Detailed view of the monitor's input ports: DP-IN, HDMI-1, HDMI-2, H/P (headphone out), and DC-IN (power).
3.3. Adjusting the Monitor Position
The monitor stand allows for tilt, height, and pivot adjustments to optimize your viewing experience. Gently adjust the monitor to your preferred ergonomic position.
Figure 3.5: Side view illustrating the monitor's height adjustment capabilities.
4. Operating the Monitor
4.1. On-Screen Display (OSD) Control
The monitor features a joystick button located at the bottom center for navigating the On-Screen Display (OSD) menu. Press the joystick to access the main menu, then move it up, down, left, or right to select and adjust settings.
4.2. Key Gaming Features
- 165Hz Refresh Rate: Provides smoother motion and reduced input lag for a more fluid gaming experience.
- 1ms Motion Blur Reduction (MBR): Reduces motion blur, making fast-paced action clearer. This feature can be enabled or disabled via the OSD menu.
- AMD FreeSync: Synchronizes the monitor's refresh rate with your AMD graphics card's frame rate to eliminate screen tearing and stuttering. Ensure FreeSync is enabled in both the monitor's OSD and your graphics card settings.
- HDR10: Supports High Dynamic Range content for enhanced contrast and color depth.
- Black Stabilizer: Adjusts the black saturation levels to make dark images stand out better in dark scenes, improving visibility of enemies in shadowy areas.
- Crosshair: An on-screen crosshair feature can be enabled for improved aiming accuracy in games.
- Game Mode: Pre-set display modes optimized for various game genres (e.g., FPS, RTS) can be selected from the OSD menu.
5. Maintenance
5.1. Cleaning the Monitor
To clean the monitor screen, gently wipe it with a soft, lint-free cloth. For stubborn marks, lightly dampen the cloth with water or a mild, non-abrasive screen cleaner. Avoid using harsh chemicals, alcohol, or ammonia-based cleaners, as these can damage the screen surface. For the monitor casing, use a soft, dry cloth.
5.2. Storage
When storing the monitor for an extended period, ensure it is powered off and disconnected from all cables. Store it in a cool, dry place, ideally in its original packaging to protect it from dust and physical damage.
6. Troubleshooting
- No Power: Ensure the power cord is securely connected to both the monitor and a working power outlet. Check if the power indicator light is on.
- No Signal: Verify that the video cable (DisplayPort or HDMI) is correctly connected to both the monitor and your computer/device. Ensure the correct input source is selected via the OSD menu.
- Screen Tearing/Stuttering: If using an AMD graphics card, ensure AMD FreeSync is enabled in both the monitor's OSD settings and your graphics card control panel.
- Motion Blur: Check if 1ms Motion Blur Reduction (MBR) is enabled in the OSD menu. Note that MBR may affect brightness.
- Poor Picture Quality: Adjust brightness, contrast, sharpness, and color temperature settings in the OSD menu. Ensure your graphics card drivers are up to date.
- No Sound (if using monitor's headphone jack): Ensure your audio output is set to the monitor in your computer's sound settings. Check headphone connection.
For further assistance, refer to the LG support website or contact customer service.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 32GN650-B |
| Screen Size | 32 Inches |
| Panel Type | VA (Vertical Alignment) |
| Resolution | QHD (2560 x 1440) |
| Aspect Ratio | 16:9 |
| Refresh Rate | 165Hz |
| Response Time | 1ms MBR (Motion Blur Reduction) |
| HDR Support | HDR10 |
| Color Gamut | sRGB 95% |
| Adaptive Sync Technology | AMD FreeSync |
| Brightness (Typical) | 350 cd/m² |
| Contrast Ratio (Typical) | 3000:1 |
| Viewing Angle | 178° (H/V) |
| Connectivity | 2 x HDMI, 1 x DisplayPort, 1 x Headphone Out |
| Stand Adjustments | Tilt, Height, Pivot |
| Dimensions (WxHxD) with Stand | 28.1" x 19.3" x 11.5" |
| Weight with Stand | 15.9 lbs |
| Power Source | AC 240 Volts |
8. Warranty and Support
Your LG 32GN650-B Ultragear Gaming Monitor comes with a manufacturer's warranty. Please refer to the included warranty card for detailed terms, conditions, and registration information. For technical support, product registration, or service inquiries, please visit the official LG website or contact LG customer service in your region.
Online Support: Visit the LG Store on Amazon