Infanti 232GYHN002TSGBK
Contents
INFANTI LOCK-IT Lifestyle Travel System User Manual
Model: 232GYHN002TSGBK
Introduction
Welcome to the INFANTI LOCK-IT Lifestyle Travel System. This innovative system is designed to provide convenience, safety, and style for parents and their babies, from newborn up to 15 kg. Featuring an ultra-compact fold and a luggage-style transport handle, it is an ideal solution for active parents and frequent travelers. The lightweight aluminum frame and leatherette finishes ensure durability and ease of use, adding a touch of sophistication to your journeys. This manual provides essential information for the safe and proper use, assembly, and maintenance of your travel system.
Safety Information
Always prioritize your child's safety. Read and understand all instructions before using the product. Failure to follow these instructions could result in serious injury or death.
- Never leave your child unattended in the stroller or car seat.
- Always use the 5-point harness system to secure your child. Ensure it is properly adjusted and snug.
- Do not overload the stroller or storage basket. Refer to specifications for weight limits.
- Ensure the stroller is fully locked and stable before placing your child in it.
- Engage the brakes when the stroller is stationary.
- Keep hands and fingers clear of moving parts when folding or unfolding the stroller.
- The infant car seat is designed for children from newborn up to 13 kg. The stroller is suitable for children up to 15 kg.
- Do not use accessories or replacement parts other than those approved by Infanti.
- Avoid placing hot liquids or heavy objects on the stroller handle.
Components List
Before assembly, ensure all components are present:
- Stroller Frame with Seat and Canopy
- Infant Car Seat / Auto Seat
- Front Wheels (2)
- Rear Wheels (2)
- Accessory Basket (pre-attached)
- Safety Bar (removable)

Figure 1: Complete Travel System - Stroller and Infant Car Seat.
Setup and Assembly
1. Unfolding the Stroller
- Place the folded stroller on a flat surface.
- Release the folding latch, usually located on the side of the frame.
- Lift the handle upwards until the stroller frame clicks into its fully open and locked position. Ensure all locking mechanisms are engaged.
2. Attaching the Wheels
- Front Wheels: Insert the front wheel assemblies into the designated slots on the front legs of the stroller until they click securely into place.
- Rear Wheels: Slide the rear wheel assemblies onto the rear axle until they lock.
- Pull on each wheel to ensure it is firmly attached.
3. Attaching the Safety Bar
Align the safety bar with the attachment points on both sides of the stroller seat and push until it clicks into place. It is removable for easier child placement.

Figure 2: Key features of the LOCK-IT Travel System, including the 5-point harness and ultra-compact fold.
Operating Instructions
1. Using the 5-Point Harness
Always secure your child with the 5-point harness.
- Place your child in the seat.
- Bring the shoulder straps over the child's shoulders and the waist straps around their hips.
- Connect the two buckle prongs into the central buckle until they click.
- Adjust the straps to ensure a snug fit, leaving no more than one finger's width between the strap and your child's collarbone.

Figure 3: Stroller features including the 5-point harness and adjustable leg rest.
2. Reclining the Seat
The stroller seat offers multiple recline positions for your child's comfort. Locate the recline mechanism (usually a strap or lever) behind the seat and adjust to the desired angle.
3. Folding the Stroller (Ultra-Compact One-Hand Fold)
The LOCK-IT Travel System features an ultra-compact one-hand fold for easy storage and transport.
- Ensure the canopy is fully retracted and the seat is in an upright position.
- Locate the folding mechanism on the handle or frame (refer to product specific instructions if needed).
- Activate the mechanism and push the handle forward and down until the stroller folds compactly.
- Secure the folding latch to keep the stroller in its folded position.
- Extend the luggage-style transport handle for easy pulling.

Figure 4: Ultra-compact fold and luggage-style transport handle.
4. Using the Infant Car Seat / Auto Seat
The included infant car seat is suitable for newborns up to 13 kg and can be used as a car seat or attached to the stroller frame.
- Attaching to Stroller: Align the car seat with the stroller's attachment points (usually where the safety bar connects) and press down firmly until it clicks into place. Ensure it is securely fastened by gently pulling upwards.
- Removing from Stroller: Locate the release levers (typically on the sides or back of the car seat) and lift the car seat off the stroller frame.
- In Vehicle: Always refer to the separate car seat manual for detailed installation instructions in a vehicle. Ensure the car seat is installed correctly using the vehicle's seat belt system.

Figure 5: Infant car seat attached to the stroller.
Maintenance and Care
- Cleaning Fabric: Use a mild soap and cold water solution to spot clean fabric parts. Do not use bleach. Air dry completely.
- Cleaning Frame: Wipe the aluminum frame with a soft, damp cloth. Dry thoroughly to prevent rust.
- Wheels: Regularly check wheels for debris and clean as needed. Lubricate moving parts with a silicone-based lubricant if they become stiff.
- Storage: Store the travel system in a dry place, away from direct sunlight and extreme temperatures.
- Inspections: Periodically check all fasteners, rivets, and stitching to ensure they are secure and undamaged.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stroller difficult to fold/unfold. | Folding mechanism obstructed or not fully engaged. | Ensure canopy is retracted and seat is upright. Check for any obstructions. Apply light lubricant to moving parts if necessary. |
| Wheels squeak or do not turn smoothly. | Debris in wheel mechanism or lack of lubrication. | Clean wheels and axles. Apply a silicone-based lubricant to the wheel bearings. |
| Harness straps are too tight or too loose. | Incorrect adjustment. | Refer to "Using the 5-Point Harness" section to properly adjust straps for a snug fit. |
| Car seat does not attach securely to stroller. | Misalignment or obstruction. | Ensure car seat is correctly aligned with attachment points. Check for any debris in the locking mechanism. Push down firmly until it clicks. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 232GYHN002TSGBK |
| Target Gender | Unisex |
| Material Type | Aluminum (Frame) |
| Stroller Weight Capacity | Up to 15 kg |
| Infant Car Seat Weight Capacity | Newborn up to 13 kg |
| Assembled Dimensions (L x W x H) | 100 cm x 55 cm x 32 cm (approx. 39.4 x 21.7 x 12.6 inches) |
| Folded Dimensions (L x W x H) | 44 cm x 43 cm x 28 cm (approx. 17.3 x 16.9 x 11 inches) |
| Product Weight | 10.1 kg (approx. 22.3 lbs) |
| Wheel Type | Swivel |
| Batteries Required | No |

Figure 6: Stroller dimensions in folded and assembled states.
Warranty and Support
For warranty information, product support, or to purchase replacement parts, please contact Infanti customer service. Keep your proof of purchase for warranty claims.
Contact Information: Please refer to the Infanti official website or the packaging for the most current contact details.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.