Rydeen CM-MINy3

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

RYDEEN CM-MINy3 Backup/Front View Camera Instruction Manual

Model: CM-MINy3

1. Introduction

The RYDEEN CM-MINy3 is a versatile camera designed for use as both a backup and front view camera in various vehicles, including cars, pickup trucks, SUVs, RVs, and vans. It features a Super CMOS IV Sensor with NightVision Technology, providing clear images in low-light conditions. Its compact design and durable, waterproof housing ensure reliable performance.

2. Product Features

Sensor: Super CMOS IV Sensor with NightVision Technology for enhanced low-light visibility.
Waterproof Rating: IP67 - IP68, ensuring durability in various weather conditions.
Resolution: 480 TV Lines for clear image quality.
Minimum Illumination: Less than 0.3 Lux, allowing operation in very dim environments.
Video System: NTSC (color).
Viewing Angle: 170 degrees wide-angle lens for broad coverage.
Image Options: Mirror/Standard selectable for flexible installation (rear or front view).
Parking Lines: Selectable parking guide lines for assistance during reversing.
Connectivity: Quick Disconnect Wire Harness for easy installation and removal.
Housing: OEM Style ABS Housing with Wing Mount.

3. Package Contents

Verify that all components are present before beginning installation.

RYDEEN CM-MINy3 camera and wiring harnesses

Image: The RYDEEN CM-MINy3 camera, power wire harness, compact quick disconnect, and RCA video cable.

RYDEEN CM-MINy3 Camera Unit
Power Wire Harness
RCA Video Cable
Compact Quick Disconnect Cable
Mounting Hardware (screws, adhesive if applicable)

4. Installation Guide

Professional installation is recommended. Disconnect the vehicle's battery before starting any electrical work.

4.1 Camera Installation Position Options

The camera can be positioned either on the bottom side of the trunk lid or on the face side of the rear trunk lid. It can be mounted using double-sided adhesive tape or by drilling into the deck lid with short sheet metal screws. Disassembly of the camera mounting bracket may be necessary depending on the chosen mounting location.

Diagram showing two camera installation positions: under trunk lip and on trunk face

Image: Diagram illustrating two possible mounting locations for the camera on a vehicle's trunk lid.

4.2 Electrical Connection

The CM-MINy3 features jumper wires for configuration. Ensure proper connections to the monitor, reverse lamp, and ACC/IGN output as per the desired camera configuration (backup or front view).

Electrical connection diagrams for backup and front cameras

Image: Detailed wiring diagrams for connecting the camera as a backup camera (Scenario A and B) or a front camera (Scenario C).

White Loop:
- Connected: For rear installation (default, mirror image).
- Disconnected: For front installation (standard image).
Green Loop: (Parking Guide Line Option)
- Disconnected: Parking line is ON (default).
- Connected: Parking line is OFF.

The camera features a small size connector for easy routing through tight spaces during installation.

RYDEEN CM-MINy3 camera with small connector detail

Image: The camera unit highlighting its compact connector, designed for easier installation.

4.3 Angle Adjustment

After mounting the camera, adjust its angle for optimal viewing. Secure the parking brake, shift the vehicle into reverse, and adjust the camera as needed. Once the desired angle is set, tighten the bolt on the camera to secure its position.

Image: Diagram illustrating how to adjust the camera's viewing angle after installation.

5. Operating Instructions

Once installed and configured, the CM-MINy3 camera operates automatically based on its connection type.

Backup Camera Mode: When connected to the reverse lamp trigger, the camera automatically activates and displays the rear view on your monitor when the vehicle is shifted into reverse.
Front Camera Mode: When configured for front view and connected to an ACC/IGN output, the camera can be activated manually or through a compatible head unit to display the front view.
Parking Lines: If the green loop is disconnected, parking guide lines will appear on the screen to assist with parking maneuvers. These lines provide visual cues for distance and trajectory.
NightVision: The Super CMOS IV Sensor with NightVision Technology enhances visibility in low-light conditions, providing a clear image even at night.

Video: This video demonstrates the features and installation of the RYDEEN CM-MINy3 camera, including its compact design, waterproof rating, and the functionality of parking lines for confident reversing, both day and night. It also shows a comparison of image quality.

6. Maintenance

The RYDEEN CM-MINy3 camera is designed for durability and requires minimal maintenance.

Cleaning: Periodically clean the camera lens with a soft, damp cloth to ensure a clear view. Avoid abrasive cleaners that could scratch the lens.
Inspection: Regularly check the camera and its wiring for any signs of damage or loose connections.
Waterproofing: The camera has an IP67-IP68 waterproof rating. Ensure that the housing remains intact and free from cracks to maintain its water resistance.

7. Troubleshooting

If you encounter issues with your CM-MINy3 camera, refer to the following common troubleshooting steps:

Problem	Possible Cause	Solution
No image on monitor	Loose video cable connection. No power to the camera. Incorrect input selected on monitor. Damaged camera or cable.	Check all RCA video connections. Verify power and ground connections to the camera. Ensure monitor is set to the correct video input. Inspect camera and cables for visible damage.
Image is blurry or distorted	Dirty camera lens. Loose camera mounting. Interference from vehicle electronics.	Clean the camera lens. Ensure the camera is securely mounted and adjusted. Check wiring for proper shielding and routing away from power sources.
Parking lines not appearing/incorrect	Green loop jumper wire incorrectly configured.	Ensure the green loop is disconnected for parking lines ON (default). Connect it to turn parking lines OFF.
Image is mirrored/not mirrored incorrectly	White loop jumper wire incorrectly configured.	Ensure the white loop is connected for mirror image (rear view, default). Disconnect it for standard image (front view).

8. Specifications

Specification	Value
Model Number	CM-MINy3
Sensor Type	Super CMOS IV Sensor with NightVision Technology
Waterproof Rating	IP67 - IP68
Resolution	480 TV Lines
Minimum Illumination	<0.3 Lux
Video System	NTSC (color)
Viewing Angle	170 Degrees
Image Selectable	Mirror/Standard
Parking Lines	Selectable On/Off
Product Dimensions	0.78"L x 0.78"W x 0.78"H
Item Weight	1 pound
Voltage	12 Volts
Optical Sensor Size	1/3 inch
Connector Type	RCA

9. Warranty and Support

For warranty information or technical support regarding your RYDEEN CM-MINy3 camera, please refer to the documentation included with your purchase or visit the official Rydeen website. You may also contact Rydeen customer service directly for assistance.

Manufacturer: Rydeen

Website: Rydeen Official Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.