FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk Instruction Manual

1. Introduction

Thank you for choosing the FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read all instructions carefully before use and retain this manual for future reference.

2. Safety Information

• Ensure all parts are present and undamaged before assembly.
• Assembly may require two people due to the weight of components.
• Keep children and pets away from the desk during operation.
• Do not overload the desk. The maximum weight recommendation is 154 pounds (70 kg).
• Ensure all electrical connections are secure and follow local electrical safety standards.
• Avoid placing liquids directly on the control panel or near electrical components.
• Use only the provided power adapter.
• Do not disassemble or modify the desk's motor or control system.

3. Package Contents

Your FLEXISPOT EN2 desk will arrive in two separate packages. Please verify all components against the packing list before beginning assembly.

• Desktop (55" x 28" White Top)
• Desk Frame (Gray Frame)
• Lifting Columns (Legs)
• Crossbeam
• Support Plates
• Motor
• Control Panel (Keypad)
• Power Adapter and Cables
• Clamp Power Strip with 3 AC Outlets and 2 USB Ports
• Cable Management Tray
• Assembly Hardware (screws, hex keys, wrench)
• Instruction Manual

4. Assembly Instructions

Please follow these steps carefully. An electric drill (not included) may be required for some steps.

1. Prepare the Desktop: Lay the desktop upside down on a soft, clean surface to prevent scratches. The packaging includes foam pads that can be used for this purpose.
2. Install the Motor: Attach the motor to the right lifting column. Ensure the motor's gear aligns with the column's mechanism and secure it with the provided screws and hex key. Tighten screws gradually and evenly.
3. Attach Lifting Columns to Crossbeam: Connect the lifting columns to the crossbeam. Ensure the orientation is correct as per the manual (e.g., motor side).
4. Install Support Plates: Secure the support plates to the lifting columns using the specified screws.
5. Install Desk Feet: Attach the desk feet to the bottom of the lifting columns. Ensure they are securely fastened.
6. Install Transmission Rod: Insert the transmission rod between the lifting columns, connecting it to the motor. Loosen the nut on the rod if necessary for insertion, then tighten it.
7. Mount the Control Panel (Keypad): Position the control panel on the underside of the desktop, typically on the front right edge for easy access. Secure it with the provided screws.
8. Mount the Cable Management Tray: Assemble the cable management tray by bending it along the perforated lines. Mount it to the underside of the desktop using the provided screws. Ensure the shorter lip faces the back to allow cables to drop in.
9. Connect Wiring: Connect the motor cable, control panel cable, and power adapter to the main control box. Use the provided cable ties and adhesive clips to organize and secure all cables neatly under the desk and within the cable management tray.
10. Attach Clamp Power Strip: The clamp power strip can be attached to the back or side of your desk. Adjust the clamp to fit your desktop thickness and secure it in your desired location.
11. Final Check: Ensure all screws are tightened and all cables are securely connected and managed. Carefully flip the desk upright.

5. Operating Instructions

Your FLEXISPOT EN2 desk features an intuitive 6-button digital controller for easy height adjustment and memory presets.

• Up/Down Buttons (Arrows): Press the up arrow to raise the desk and the down arrow to lower it. The current height will be displayed on the LED screen.
• Memory Presets (1, 2, 3, 4): Your desk can store up to four preferred height settings. To set a memory position:
  1. Adjust the desk to your desired height using the up/down arrows.
  2. Press the 'M' button. The LED display will show 'S-'.
  3. Press the desired number button (1, 2, 3, or 4) within 3 seconds. The height is now saved.
• Anti-Collision Feature: The desk is equipped with an anti-collision system. If the desk encounters an obstacle during movement, it will stop and reverse slightly to prevent damage. You can adjust the sensitivity of this feature (refer to the full manual for detailed instructions on adjusting sensitivity levels).

6. Features

• Removable Desktop Power Outlet: Equipped with 3 power outlets and 2 USB charging ports, clip it to the back or side of your desk.
• Ample Whole-Piece Desktop: FSC-Certified wood desktop (55" x 28") provides generous space. Hand-measured: ±1" tolerance.
• 4 Memory Buttons: 6-button digital controller with 4 programmable memory presets.
• Motorized Height Adjustment: Smoothly adjusts from 28.1” to 45.7” with a quiet motor (less than 50 dB).
• Durable Construction: Industrial-grade steel frame and solid tabletop support up to 176 pounds.
• Cable Management: Integrated cable management device to keep your workspace tidy.

7. Specifications

8. Maintenance

• Cleaning: Wipe the desk surfaces with a damp cloth. Avoid harsh chemicals that may damage the finish.
• Regular Checks: Periodically check all screws and bolts to ensure they are tight. Retighten if necessary.
• Cable Inspection: Regularly inspect power cords and connections for any signs of wear or damage. Replace immediately if damage is found.

9. Troubleshooting

If you encounter any issues with your desk, please refer to the following common solutions:

• Desk Not Moving: Check all cable connections, especially the power adapter and motor cable. Ensure the power outlet is functioning.
• Uneven Movement/Wobble: Ensure all assembly screws are tightened evenly. Check if the desk is placed on a level surface. Adjust the leveling feet if necessary.
• Control Panel Not Responding: Try resetting the desk. (Refer to the full manual for specific reset procedures, often involves holding down specific buttons until 'RST' appears).
• Anti-Collision Triggering Frequently: The sensitivity of the anti-collision feature might be too high. Refer to the full manual for instructions on adjusting sensitivity levels.

10. Warranty and Support

Your FLEXISPOT EN2 desk comes with a comprehensive warranty:

• 5-Year Warranty: Covers frames, motors, and other mechanical devices.
• 2-Year Warranty: Covers controllers, switches, and electronics.

For warranty claims, technical support, or any questions not covered in this manual, please contact FLEXISPOT customer service through their official website or the retailer where you purchased the product. Please have your model number (EN2) and proof of purchase ready.