1. Introduction
Thank you for choosing the ANLAN Face Massager. This device is designed to provide comprehensive skin care through EMS microcurrent, sonic massage, constant temperature heating, and LED light therapy. Please read this manual thoroughly before use to ensure proper operation and maintenance.
Image: The ANLAN Face Massager, a white handheld device with a silver massage head, shown next to a woman's face with a grid overlay indicating skin tightening effects.
2. Safety Information
Please observe the following safety precautions to prevent injury or damage to the device:
- Do not use the device if you have sensitive skin or skin conditions without consulting a dermatologist.
- Avoid using on broken, irritated, or infected skin.
- Keep out of reach of children.
- Do not immerse the device in water or other liquids.
- If the device is damaged, do not attempt to repair it yourself. Contact customer support.
- The device has an automatic 5-minute power-off setting. If you need to continue use, please restart the device.
3. Product Overview
Familiarize yourself with the components of your ANLAN Face Massager:
Image: Labeled diagram of the ANLAN Face Massager showing its components: Protection cover, Massage head, Red/Blue/Green Light Strip, On/Off/Switching Button, Clean Mode, EMS Mode, Hot Mode indicators, Metal Sensor Strip, and USB charging port.
- Massage Head: The primary contact point with the skin, designed for effective massage and light therapy.
- Red/Blue/Green Light Strip: Emits LED light for various skin benefits.
- On/Off/Switching Button: Controls power and mode selection.
- Mode Indicators: Lights indicating the currently active mode (Clean, EMS, Hot).
- Metal Sensor Strip: Ensures proper contact for microcurrent and heating functions.
- USB Charging Port: For recharging the device.
- Protection Cover: To protect the massage head when not in use.
4. Features
The ANLAN Face Massager incorporates advanced technologies for optimal skin care:
- EMS Microcurrent & Sonic Massage: Weak electrical currents activate facial muscle cells, promoting metabolism and reducing wrinkles through high-speed sound vibration (10,000 times per minute).
Image: Diagram illustrating how EMS stimulates muscle elasticity and red light promotes collagen regeneration within the skin layers.
- Constant Temperature Heating (45°C): Gentle heat promotes blood circulation, stimulates fibroblast and collagen growth, accelerates nutrient absorption, and helps flush out waste. This can improve fine lines, wrinkles, sagging, melanin, and scars.
- LED Light Therapy (Red, Blue, Green Modes):
Image: Visual representation of the three light modes: Green (Clean), Blue (Hot), and Red (EMS), with descriptions of their functions.
- Red Light (620nm): Effectively activates collagen, improves fine lines, and restores skin elasticity.
- Blue Light (470nm): Inhibits bacterial growth, reduces acne and pimples.
- Green Light (520nm): Calms the skin, making it firm, smooth, and delicate.
- Nutrient Absorption Enhancement: The device helps promote deeper absorption of skincare products.
Image: Illustration showing the device's ability for deep cleaning (green light) and promoting nutrient absorption (blue light).
5. Setup and Charging
Before first use, ensure the device is fully charged.
5.1 Charging Instructions
Image: Visual guide for charging, showing the USB charging port and cable, and proper insertion technique.
- Locate the USB charging port on the device.
- Connect the provided USB charging cable to the device's port. Due to the curved interface, insert the cable at a certain angle and with appropriate force to ensure it connects properly.
- Connect the other end of the USB cable to a suitable power source (e.g., USB wall adapter, computer USB port).
- Ensure the connection is secure. If the cable feels loose, re-connect it.
- The charging time is approximately 2 hours. Ensure sufficient charging time for optimal battery life.
6. Operating Instructions
Follow these steps for effective use of your ANLAN Face Massager:
Image: Four-step visual guide demonstrating the application of skincare product, powering on, selecting mode, and massaging the neck.
- Preparation: After cleansing your skin, apply your preferred skincare product (e.g., serum, lotion, oil) evenly on the area you wish to treat (face, neck, arms, etc.).
- Power On: Long press the On/Off button for 2 seconds to turn on the device.
- Select Mode: Press the On/Off button repeatedly to cycle through the available light and massage modes (Clean, EMS, Hot) according to your needs. The corresponding indicator light will illuminate.
- Massage: Gently move the massage head across your skin. For neck lifting, fit the massage head to the skin and move it from the bottom to the top of the neck.
- Automatic Shut-off: Each mode will have a prompt sound after 4 minutes of use and will automatically shut down after 5 minutes. If you wish to continue, simply restart the device.
- Power Off: Long press the On/Off button to turn off the device when finished.
Image: Demonstrates the versatility of the device for use on the neck, face, and arms, highlighting its multi-purpose design.
7. Maintenance
Proper care ensures the longevity of your device:
- After each use, gently wipe the massage head with a soft, damp cloth. Do not use abrasive cleaners or immerse in water.
- Ensure the device is completely dry before storing.
- Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep the protection cover on the massage head when not in use to prevent damage.
8. Troubleshooting
If you encounter issues with your device, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery or not charged. | Charge the device fully (approx. 2 hours). Ensure the charging cable is securely connected. |
| Device not charging. | Charging cable not properly inserted or faulty cable/adapter. | Ensure the USB charging cable is inserted at the correct angle and with sufficient force. Try a different USB port or adapter. |
| Device automatically shuts off too quickly. | Normal operation (5-minute auto-off feature). | This is a built-in safety feature. Simply restart the device if you wish to continue your session. |
| No sensation from EMS/Vibration. | Insufficient contact with skin or dry skin. | Ensure the massage head and metal sensor strip are in full contact with your skin. Apply sufficient skincare product to ensure good conductivity. |
9. Specifications
| Attribute | Detail |
|---|---|
| Brand | ANLAN |
| Model Number | DGMT-4788-SBN |
| Colour | White |
| Material | Plastic |
| Item Weight | 0.25 Kilograms |
| Item Dimensions (L x W x H) | 13 x 10 x 3 cm |
| Power Source | Battery Powered |
| Target Audience | Women's |
| Skin Type | All |
10. What's in the Box
Your ANLAN Face Massager package includes:
- ANLAN Face Massager Device
- USB Charging Cable
- User Manual
Image: The ANLAN Face Massager, its packaging box, USB charging cable, and user manual.
11. Warranty and Support
ANLAN is committed to providing high-quality products and excellent customer service.
- After-Sales Service: Enjoy 365-Day After-Sales Service for your peace of mind.
- Technical Help: Lifetime Technical Help is available for any operational or technical queries.
- Returns & Resend: Free Return and Resend options are available as per policy.
- For support, please contact ANLAN customer service. Quick replies are typically provided within 24 hours on weekdays.
