Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your NiTHO Drive Pro V16 Gaming Steering Wheel. Please read this manual carefully before use to ensure proper functionality and to maximize your gaming experience.
Image: The complete NiTHO Drive Pro V16 setup, including the steering wheel, pedal unit, and gear shifter.
Package Contents
Ensure all items are present before proceeding with setup:
- NiTHO Drive Pro V16 Steering Wheel with integrated shifter
- Pedal Unit (Accelerator and Brake)
- Mounting Clamps (2x)
- User Manual (this document)
Setup
1. Mounting the Steering Wheel
The Drive Pro V16 can be securely mounted to a table or racing stand using the included clamps or suction cups.
Image: Left: Two mounting clamps for securing the wheel to a surface. Right: Suction cups on the underside of the steering wheel base for additional stability.
- Place the steering wheel on a stable, flat surface.
- Attach the two mounting clamps to the designated slots on the underside of the steering wheel base.
- Tighten the clamps securely to the table or stand.
- Ensure the suction cups on the base are pressed firmly against the surface for maximum stability.
2. Connecting the Pedals
Connect the pedal unit to the steering wheel using the dedicated cable.
Image: Rear view of the steering wheel showing the cable connection point for the pedal unit, with the pedal unit visible in the background.
- Locate the pedal input port on the back of the steering wheel base.
- Plug the cable from the pedal unit into this port.
- Position the pedal unit on the floor in a comfortable and stable position. The footrest can be folded out for added comfort.
3. System Connection
The Drive Pro V16 is compatible with multiple platforms. Connect the steering wheel to your gaming system using the USB cable.
Image: Connection diagrams for PC, PS4, and Nintendo Switch. For PS4, a micro USB cable (not included) is required to connect the PS4 controller to the steering wheel.
- PC: Plug the steering wheel's USB cable directly into an available USB port on your PC.
- PlayStation 3/4: Plug the steering wheel's USB cable into an available USB port on your console. For PS4, connect your official PS4 controller to the steering wheel's dedicated USB port using a micro USB cable (not supplied).
- Xbox One/Series X|S: Plug the steering wheel's USB cable into an available USB port on your console. Connect your official Xbox controller to the steering wheel's dedicated USB port using a USB cable (not supplied).
- Nintendo Switch: Plug the steering wheel's USB cable into an available USB port on the Switch Dock. Ensure "Pro Controller Wired Communication" is enabled in the Switch system settings.
Operating Instructions
1. Basic Controls
Image: Diagram highlighting the front controls of the steering wheel, including the D-pad, action buttons, and sensitivity adjustment buttons.
- Steering Wheel: Provides 270 degrees of rotation for precise steering control.
- Pedals: The left pedal is the brake, and the right pedal is the accelerator.
- Gear Shifter: The integrated sequential gear shifter on the right side allows for manual gear changes.
- Paddle Shifters: Located behind the steering wheel, these allow for quick up/down gear shifts.
- Action Buttons: Standard gaming buttons (A, B, X, Y, etc.) are located on the wheel for easy access.
- D-Pad: For menu navigation and directional input.
2. Sensitivity Adjustment
The steering wheel features 3 levels of sensitivity adjustment to suit different driving styles and game requirements.
- Locate the sensitivity adjustment buttons on the left side of the steering wheel.
- Press the "Sensitivity +" or "Sensitivity -" buttons to cycle through the three levels (Low, Mid, High).
- Adjust the sensitivity to your preference for optimal control in various racing scenarios.
3. Vibration Feedback
The Drive Pro V16 features dual vibration motors for realistic driving feedback, simulating road conditions and impacts.
- Vibration feedback is automatically enabled when supported by the game and platform.
- Ensure your game's settings have vibration or force feedback enabled for the best experience.
Maintenance
Proper maintenance will extend the life of your NiTHO Drive Pro V16.
- Cleaning: Use a soft, dry cloth to wipe down the steering wheel, pedals, and shifter. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the unit in a clean, dry place away from direct sunlight and extreme temperatures.
- Cable Care: Avoid sharp bends or kinks in the cables. Do not pull on the cables to disconnect the unit.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Steering wheel not recognized by console/PC. | Incorrect connection, driver issue (PC), or console settings. |
|
| No vibration feedback. | Game settings, or game does not support vibration. |
|
| Pedals not responding. | Pedal unit not connected properly. |
|
| Steering wheel feels too sensitive/not sensitive enough. | Sensitivity setting needs adjustment. |
|
Specifications
- Model Name: MLT-DP16-K
- Product Name: NiTHO Drive Pro V16 Racing Wheel
- Wheel Diameter: 10 inches (255 mm)
- Rotation Angle: 270 degrees lock-to-lock
- Vibration: Dual rumble vibration motors
- Sensitivity Levels: 3 adjustable levels
- Shifter: Integrated sequential gear shifter, F1-style paddle shifters
- Pedals: Separate floor pedal unit (Accelerator, Brake) with foldable footrest
- Connectivity: USB (2.1m cable length)
- Compatibility: PC (D-Input & X-Input), PlayStation 3, PlayStation 4, Xbox One, Xbox Series X|S, Nintendo Switch
- Product Dimensions: 44 x 32.5 x 27.5 cm
- Weight: 4 kg
- Manufacturer: NITHO
- Country of Origin: Germany
Warranty and Support
For warranty information and technical support, please refer to the official NiTHO website or contact your local retailer. Keep your proof of purchase for warranty claims.
Manufacturer: NITHO
Manufacturer Address: 98 Dingwan 4th Road, Sanzao Town, Jinwan District, Zhuhai City, Guangdong Province, China
Importer (EU): APEX CE Specialists GmbH, Grafenberger Allee 277, 40237 Düsseldorf, DE
Importer (UK): APEX CE Specialists LIMITED, 6f East Union Street, Manchester, England. M16 9AE
Email for EU/UK Importer: info@apex-ce.com
Email for other Importer: onlineAMZTM@outlook.com
Product UPC: 6971308700920
Image: Label showing warning information in multiple languages, manufacturer details, and recycling symbols.
