EASYGUARD EC010-SR PKE Car Alarm Remote Starter Instruction Manual

1. Product Overview

The EASYGUARD EC010-SR is a Passive Keyless Entry (PKE) car alarm system with remote engine start and push-button start functionality. This system enhances vehicle security and convenience, offering features such as automatic locking/unlocking, remote engine control, and shock warning. It is designed for most DC12V petrol and diesel vehicles.

2. Key Features

Push Button Start/Stop: Start or stop your vehicle's engine with a simple button press.
PKE (Passive Keyless Entry): Automatically locks/unlocks car doors as you approach or walk away from the vehicle with the key fob.
Remote Engine Start/Stop: Conveniently start or stop the engine from a distance.
Manual Arm/Lock & Disarm/Unlock: Standard remote control functions.
Mute/Audible Alarm: Configurable alarm sound.
Remote Trunk Release: Requires an extra trunk release solenoid kit (e.g., ASIN: B00N4RP8VM).
Panic Mode: Activates the alarm for emergency situations.
Valet Mode: Temporarily disables security features for service.
Anti-Hijacking: Security feature to prevent vehicle theft.
Central Door Locking Automation: Can be enabled or disabled.
Shock Warning: Alerts to impacts or disturbances.
Emergency Override: Allows vehicle operation in case of remote malfunction.
Automatic Window Closing: Optional, requires an extra window closer module (e.g., 4-door window closer ASIN: B00N3RKA8E).

3. Important Notes & Compatibility

This system is compatible with most DC12V petrol and diesel vehicles.
Not compatible with cars that have an OEM push start button.
Not suitable for vans or trucks.
For diesel cars with an engine starting time over 12 seconds, an extra timer delay switch is required.
Professional installation is highly recommended. If you lack car alarm installation experience, seek assistance from a qualified installer.
If your factory OEM key fob contains a chip immobilizer, an extra bypass module (e.g., ASIN: B00MEHBVIC or B07NSLPBG7) is required.
The vehicle's steering lock must be unlocked, released, or removed during installation.

4. Components Included

The EASYGUARD EC010-SR kit typically includes the following components:

Main Control Module
Remote Controls (Key Fobs)
Siren
Shock Sensor
Push Start Button
PKE Antennas
Alarm Antenna
Main Wire Harnesses (20-pin and 6-pin ignition wire)
LED Indicator
Reset Switch
Engine Cut-off Relay

EASYGUARD EC010-SR Kit Components — Figure 1: Overview of the EASYGUARD EC010-SR kit components, including remote controls, control module, siren, shock sensor, wire harnesses, push button, PKE antennas, alarm antenna, and LED indicator.

EASYGUARD EC010-SR Control Module Connections — Figure 2: Detailed view of the control module, showing various connection ports for the programming switch, 20-pin wire harness, shock sensor, push start button, alarm antenna, and PKE antennas.

5. Setup and Installation

Installation of the EASYGUARD EC010-SR system involves electrical wiring and integration with your vehicle's existing systems. Due to the complexity and specific requirements (e.g., bypass modules for immobilizers, steering lock removal), professional installation by a certified car alarm installer is strongly recommended.

Key installation considerations include:

Wiring Connections: Connect the main wire harnesses to the vehicle's ignition, power, and other relevant electrical systems according to the detailed wiring diagram provided in the full user manual.
PKE Antenna Placement: Proper placement of the PKE antennas is crucial for optimal passive keyless entry functionality. They should be installed in locations that allow for consistent signal detection around the vehicle.
Shock Sensor Adjustment: The shock sensor sensitivity may need to be adjusted after installation to prevent false alarms while ensuring adequate protection.
Push Button Installation: The push start button replaces the traditional ignition key cylinder. Ensure it is securely mounted and wired correctly.

Video 1: This video demonstrates the installation process for PKE antennas, showing typical placement within a vehicle to ensure proper passive keyless entry functionality.

6. Operating Instructions

The EASYGUARD EC010-SR system offers various functions for convenience and security. Familiarize yourself with the remote control buttons and system responses.

EASYGUARD EC010-SR Remote Control Button Functions — Figure 3: Illustration of the remote control buttons, indicating the LED indicator, Arm/Panic mode button, Start button/Trunk release button, and Disarm button. Note the spare key blade place, which is not equipped by default.

EASYGUARD EC010-SR Main Features Overview — Figure 4: Visual representation of the main features: PKE Passive Keyless Entry, Remote Engine Start, Push Start Button, and Shock Alarm Warning.

6.1. Passive Keyless Entry (PKE)

With the key fob in your possession, the system will automatically:

Unlock: When you approach the vehicle within 1-3 meters.
Lock: When you walk away from the vehicle for 2-3 meters.

EASYGUARD EC010-SR PKE Passive Keyless Entry Range — Figure 5: Diagram illustrating the PKE functionality, showing automatic unlocking when approaching within 3-6 feet and automatic locking when walking away 6-9 feet with the key fob.

6.2. Remote Engine Start/Stop

To remotely start the engine, press and hold the start button on your remote control for approximately 3 seconds. To stop the engine remotely, repeat the same action.

EASYGUARD EC010-SR Remote Engine Start Function — Figure 6: Depiction of the remote engine start feature, highlighting its ability to pre-cool the car in summer or pre-warm it in winter.

Video 2: This video demonstrates the functions of PKE (Passive Keyless Entry) and remote engine start, showing how the system automatically locks/unlocks and allows remote engine operation.

6.3. Push Button Start/Stop

Once inside the vehicle and the system is disarmed:

Accessory Mode: Press the push button once without pressing the brake pedal.
Ignition ON: Press the push button a second time without pressing the brake pedal.
Engine Start: Press the brake pedal and then press the push button.
Engine Stop: Press the brake pedal and then press the push button again.

EASYGUARD EC010-SR Push Button Dimensions and Colors — Figure 7: Details on the push start/stop button, including its dimensions and the blue/red color indicators for different states.

7. Maintenance

To ensure the longevity and optimal performance of your EASYGUARD EC010-SR system:

Keep remote controls dry and avoid exposure to extreme temperatures.
Replace remote control batteries (2 CR2 batteries) as needed to maintain reliable operation.
Periodically check all wiring connections for security and signs of wear.
Avoid using harsh chemicals to clean the system components.

8. Troubleshooting

If you encounter issues with your EASYGUARD EC010-SR system, consider the following common solutions:

System Not Responding: Check remote control battery. Ensure you are within range.
Engine Not Starting: Verify the brake pedal is pressed firmly. Check if the immobilizer bypass module is functioning correctly (if applicable). Ensure the steering lock is disengaged.
False Alarms: Adjust the sensitivity of the shock sensor. Ensure all doors, hood, and trunk are properly closed.
PKE Not Working: Ensure the key fob is within the specified range. Check for any signal interference.

For persistent issues or complex problems, it is recommended to contact professional technical support or a qualified installer.

9. Specifications

Item Weight: 3.29 pounds
Package Dimensions: 9.3 x 6.3 x 3.3 inches
Item Model Number: EC010-SR
Batteries: 2 CR2 batteries required (included)
Wireless Remote: Yes
Compatible Devices: DC12V cars (except those with an OEM push start button, trucks, and vans)
Remote Control Included: Yes
Manufacturer: ieasyguard.com
First Available Date: May 23, 2020

10. Warranty and Support

For any installation problems or technical assistance, please contact the seller or EASYGUARD customer support. They will provide the necessary technical support to resolve your issues.

	EASYGUARD EC003 User Manual and Wiring Diagram Comprehensive user manual and wiring diagram for the EASYGUARD EC003 car alarm system, featuring PKE, remote engine start, and push-button start/stop functionality. Includes installation guides, function descriptions, troubleshooting tips, and technical specifications.
	EASYGUARD EC003N PKE Car Alarm User Manual & Installation Guide Comprehensive user manual and installation guide for the EASYGUARD EC003N PKE Car Alarm system, detailing features, installation steps, wiring diagrams, and troubleshooting.
	EASYGUARD EC002 PKE Car Alarm with Push Start System User Manual Comprehensive user manual and installation guide for the EASYGUARD EC002 series PKE car alarm system, featuring push-to-start, remote engine start, passive keyless entry, and advanced security features. Includes detailed wiring diagrams and operational instructions.
	EASYGUARD EC002PP(B)-N-BE2 Plug and Play PKE Remote Starter Installation Guide Detailed installation guide and wiring method for the EASYGUARD EC002PP(B)-N-BE2 plug and play PKE remote starter system, compatible with standard key start automatic transmission Benz V class, Vito, and Metris (2016-2022). Includes common functions and setup instructions.
	EASYGUARD EC207-M9 2-Way Car Alarm System User Manual Comprehensive user manual for the EASYGUARD EC207-M9 2-way car alarm system, featuring remote engine start, push-button start, shock sensor, and central locking automation.
	EASYGUARD Smart Key PKE Installation Guide for Mercedes Benz Comprehensive installation and wiring guide for the EASYGUARD Smart Key PKE kit, compatible with 2014+ Mercedes Benz FBS4 vehicles. Includes programming, wiring, and setup instructions.