1. Introduction
This manual provides instructions for the VINABTY BN59-01175C TM1240 replacement remote control. It is designed to be compatible with various Samsung TV models, offering a direct replacement for your original remote without requiring complex setup.
Compatible Samsung TV models include: UA58H5200, UE28J4100A, UE32J4100A, UE32J5100A, UE40J5100A, UE48J5100A, UE50J5100A, UE32J5120A, UE40J5120A, and other 4 series and 5 series models. It also replaces BN59-01199D, BN59-01199E, and BN59-01175B remotes.
2. Product Overview
The VINABTY BN59-01175C TM1240 remote control features a standard layout for easy navigation and control of your Samsung television. It is designed for ergonomic comfort and intuitive use.
Figure 2.1: Front view of the remote control with all buttons visible.
The remote includes dedicated buttons for power, source selection, number pad, volume control, channel navigation, menu access, media playback, and colored function keys (A, B, C, D).
3. Setup
3.1 Battery Installation
This remote control requires two AAA batteries (not included). Follow these steps to install the batteries:
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover downwards to open the compartment.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Figure 3.1: Battery compartment with AAA batteries.
Note: No programming is required for this remote. Once batteries are installed, it is ready for use with compatible Samsung TVs.
4. Operating Instructions
Point the remote control directly at your Samsung TV. Ensure there are no obstructions between the remote and the TV's infrared receiver.
4.1 Basic Functions
- Power (⏷): Turns the TV on or off.
- Source: Selects the input source (e.g., HDMI 1, AV).
- Number Pad (0-9): Enters channel numbers directly.
- Volume (+/-): Adjusts the TV volume.
- Mute: Mutes or unmutes the TV sound.
- Channel (CH +/-): Changes TV channels sequentially.
- Menu: Accesses the TV's main menu.
- Navigation Arrows (Up, Down, Left, Right): Navigates through menus and options.
- Enter (●): Confirms selections.
- Return: Goes back to the previous screen or menu.
- Exit: Exits the current menu or application.
- Media.P (Media Play): Accesses media playback functions.
- Tools: Opens a quick menu with common functions.
- Info: Displays information about the current program or input.
- Colored Buttons (A, B, C, D): These buttons perform specific functions depending on the TV model or current application. Refer to your TV's on-screen prompts.
Figure 4.1: Remote control in typical use.
5. Maintenance
5.1 Cleaning
To clean the remote control, gently wipe it with a soft, dry cloth. Do not use liquid cleaners, abrasive pads, or chemical solvents, as these may damage the remote's surface or internal components.
5.2 Battery Replacement
Replace batteries when the remote's performance degrades or it stops responding. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.
5.3 Storage
When not in use for extended periods, remove the batteries to prevent leakage, which can damage the remote. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote is not working. | Batteries are dead or incorrectly installed. | Replace batteries with new AAA batteries, ensuring correct polarity. |
| Remote has limited range or intermittent response. | Low battery power; Obstruction between remote and TV; Remote is too far from TV. | Replace batteries. Remove any objects blocking the signal path. Move closer to the TV. |
| Certain buttons do not function. | Button malfunction; TV model incompatibility for specific advanced functions. | Ensure the remote is compatible with your specific TV model. If basic functions fail, the remote may be faulty. |
7. Specifications
- Model Number: BN59-01175C TM1240
- Brand: VINABTY
- Manufacturer: VINABTY
- Compatible Devices: Samsung Televisions (various models, including 4 and 5 series)
- Power Source: 2 x AAA Batteries (not included)
- Product Dimensions: 7 x 2 x 0.7 inches
- Item Weight: 2.17 ounces
- Color: Black
- Special Feature: Ergonomic design
- Max Number of Supported Devices: 18 (refers to the remote's internal capability, not simultaneous control)
8. Warranty and Support
Specific warranty information for this product is not provided in the available documentation. For warranty claims or technical support, please refer to the retailer or the manufacturer's official website for the most current information.
