Boncoo ZJ-Touch-G
Contents
Boncoo Bedside Touch Lamps Instruction Manual
Model: ZJ-Touch-G
1. Introduction
Thank you for purchasing the Boncoo Bedside Touch Lamps. This manual provides essential information for the safe and efficient operation of your new lamps. Please read it thoroughly before use and retain it for future reference.
Key Features:
- Sensitive Touch Dimmable Design: Control light with a simple tap on the metal base, offering 3 adjustable brightness levels.
- Energy-saving LED Bulbs Included: Comes with two 9W LED A19 bulbs (850 lumens), equivalent to 85W incandescent bulbs, providing flicker-free and buzz-free illumination.
- Optimal Size & Easy Installation: Compact design (4.49" base diameter, 15.98" height) for versatile placement and quick, tool-free assembly.
- Comfortable & Versatile Illumination: TC cloth lampshade diffuses light evenly and softly, creating a cozy ambiance suitable for various rooms.
- Elegant Design: Features a vase-inspired brass finish base and beige cylinder lampshades, enhancing any room's decor.
2. Important Safety Instructions
To reduce the risk of fire, electric shock, or injury to persons, please follow these guidelines:
- Read all instructions carefully before assembly and operation.
- Do not connect electricity until the lamp is fully assembled.
- Always unplug the lamp from the electrical outlet before cleaning or changing light bulbs.
- Use only the type and wattage of bulb specified in the specifications section.
- Do not use with a damaged cord or plug. If the cord or plug is damaged, do not attempt to repair it. Contact qualified service personnel.
- This product is for indoor use only. Do not expose to water or high humidity.
- Keep away from flammable materials.
- Ensure the lamp is placed on a stable, flat surface to prevent tipping.
3. Package Contents
Verify that all components are present and undamaged:
- 2 x Lamp Bases (Brass Metal)
- 2 x Lampshades (Beige TC Cloth)
- 2 x A19 Dimmable LED Bulbs (3000K)
- 2 x Fixing Rings

Image: Exploded view showing the E26 lamp holder, A19 bulb, brass base, and beige shade.
4. Setup and Assembly
Assembly is quick and requires no tools. Please follow these steps:
- Unscrew the Fixing Ring: Locate the fixing ring on the lamp holder and unscrew it.

Image: Hand unscrewing the fixing ring from the lamp holder.
- Fix the Lampshade: Place the lampshade onto the lamp holder, ensuring it sits securely.

Image: Hand placing the lampshade onto the lamp holder.
- Screw the Ring Back: Screw the fixing ring back onto the lamp holder to steady the lampshade.

Image: Hand screwing the fixing ring back to secure the lampshade.
- Install the Bulb: Carefully screw the provided A19 LED bulb into the E26 lamp holder.

Image: Hand installing the light bulb into the lamp holder.
- Connect to Power: Plug the lamp into a standard 120V electrical outlet.
5. Operation
Your Boncoo Bedside Touch Lamp features a convenient touch control system with three brightness levels.
Adjusting Brightness:
- To turn the lamp ON or change brightness, simply tap any metal part of the lamp base.
- Each tap will cycle through the brightness levels: Low → Medium → High → OFF.
- The lamp will remember the last brightness setting when turned off and on again.

Image: Visual representation of the lamp's three brightness settings (Low, Medium, High) and the touch activation point on the base.

Image: Two Boncoo Bedside Touch Lamps on a nightstand, one demonstrating the touch control feature.
6. Maintenance
Cleaning:
- Always unplug the lamp before cleaning.
- Wipe the metal base with a soft, dry cloth. Do not use abrasive cleaners or polishes as they may damage the finish.
- The lampshade can be gently dusted with a soft brush or vacuum cleaner attachment.
Bulb Replacement:
- Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it.
- Unscrew the old bulb from the E26 lamp holder.
- Screw in a new A19 LED bulb (maximum 60W equivalent incandescent, 9W LED recommended).
- Using non-dimmable bulbs may cause flickering or damage to the lamp's touch sensor.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Lamp flickers or buzzes. |
|
|
| Touch control is unresponsive. |
|
|
8. Product Specifications
| Brand: | Boncoo |
| Model Number: | ZJ-Touch-G |
| Dimensions (D x W x H): | 4.49" x 7.1" x 15.98" |
| Item Weight: | 3.7 Pounds (per lamp) |
| Material: | Metal (Brass Finish) & Slub Imitation Silk Cloth |
| Shade Color: | Beige |
| Bulb Base: | E26 |
| Included Bulb Type: | A19 Dimmable LED |
| Bulb Wattage: | 9 Watts (850 Lumens) |
| Color Temperature: | 3000 Kelvin |
| Max Compatible Wattage: | 60 Watts (Incandescent Equivalent) |
| Switch Type: | Touch Control (3-Way Dimmable) |
| Power Source: | Corded Electric (120 Volts) |
| Usage: | Indoor Use Only |
| Assembly Required: | Yes |
9. Warranty and Support
For any questions, concerns, or support regarding your Boncoo Bedside Touch Lamps, please contact Boncoo customer service. Refer to your purchase documentation for specific warranty details and contact information.
You can also visit the official Boncoo store on Amazon for more information and support: Boncoo Amazon Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.