ASUS ROG Strix XG27AQ 27-inch Gaming Monitor User Manual

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your ASUS ROG Strix XG27AQ 27-inch WQHD (2560 x 1440) Fast IPS gaming monitor. Please read this manual thoroughly before using your monitor to ensure optimal performance and longevity.

What's in the Box

Verify that all components are present in your package:

• ASUS ROG Strix XG27AQ Monitor
• HDMI Cable
• USB Cable
• DisplayPort Cable
• Color Calibration Report
• ROG Sticker
• Quick Start Guide
• Warranty Card
• Power Cord & Adapter

Image: Package contents for the ASUS ROG Strix XG27AQ monitor, showing the monitor, HDMI cable, USB cable, DisplayPort cable, color calibration report, ROG sticker, quick start guide, warranty card, and power cord with adapter.

Setup

1. Monitor Assembly

Carefully remove the monitor and stand components from the packaging. Attach the stand base to the stand column, then secure the assembled stand to the back of the monitor until it clicks into place. Ensure all connections are firm.

2. Connecting Cables

Connect the power cord to the monitor's DC input and then to a power outlet. Use either the DisplayPort cable or an HDMI cable to connect your computer's graphics card to the corresponding input on the monitor. For USB hub functionality, connect the upstream USB 3.0 cable from your computer to the monitor.

Image: Detailed view of the monitor's connectivity options, including DC power input, two HDMI v2.0 ports, one DisplayPort v1.2, one USB 3.0 upstream port, two USB 3.0 downstream ports, and a 3.5mm earphone jack.

Operating Instructions

1. Power On/Off

Press the power button located on the rear of the monitor to turn it on or off. The power indicator light will illuminate when the monitor is active.

2. On-Screen Display (OSD) Navigation

Use the joystick and buttons on the rear of the monitor to navigate the OSD menu. The joystick typically allows for quick navigation, while the buttons provide shortcuts to common settings.

3. Adjusting Display Settings

• Refresh Rate: The monitor supports an ultrafast 170Hz (overclocked) refresh rate. This can be adjusted in your graphics card settings or through the monitor's OSD.


Image: Visual demonstration of the difference between 170Hz and 60Hz refresh rates, highlighting the smoother motion provided by the higher refresh rate.

• Response Time: ASUS FastIPS technology enables a 1ms response time (GTG) for sharp gaming visuals. This setting is crucial for reducing ghosting and motion blur.


Image: The monitor showcasing its 1ms Fast IPS technology, emphasizing highly detailed visuals and contrast.

• G-SYNC Compatible: This monitor is Certified as G-SYNC Compatible, providing a tear-free gaming experience by enabling Variable Refresh Rate (VRR). Ensure G-SYNC is enabled in your NVIDIA control panel.
• Extreme Low Motion Blur Sync (ELMB SYNC): ELMB SYNC technology works with G-SYNC Compatible to eliminate ghosting and tearing, delivering sharp visuals at high frame rates. Activate this feature through the OSD.

Image: A side-by-side comparison illustrating the effect of Extreme Low Motion Blur Sync (ELMB SYNC) being on versus off, demonstrating clearer images with ELMB SYNC.
• HDR™ 400: High Dynamic Range (HDR) technology with DCI-P3 95% color gamut and DisplayHDR 400 certification delivers enhanced contrast and color performance. Enable HDR in your operating system display settings for compatible content.
• Eye Care: The monitor incorporates Eye Care features to reduce eye strain during prolonged use. Adjust Blue Light Filter settings via the OSD to minimize harmful blue light emissions.

4. Ergonomic Adjustments

The monitor stand allows for height adjustment (0-100mm), swivel (-25° to +25°), pivot (0°-90° clockwise), and tilt (-5° to +20°). Adjust the monitor to your preferred viewing angle for maximum comfort.

Image: Illustrations demonstrating the monitor's ergonomic capabilities, including height adjustment, swivel, pivot for portrait mode, and tilt functionality.

Specifications

Maintenance

Cleaning the Monitor

To clean your monitor, first power it off and disconnect the power cord. Use a soft, lint-free cloth lightly dampened with a screen-specific cleaning solution. Avoid using harsh chemicals or abrasive materials that could damage the screen surface. Gently wipe the screen and bezel to remove dust and fingerprints.

Troubleshooting

No Image on Screen

• Ensure the power cable is securely connected to both the monitor and the power outlet.
• Verify that the video cable (DisplayPort or HDMI) is firmly connected to both the monitor and your computer's graphics card.
• Check if the correct input source is selected in the monitor's OSD menu.
• Confirm that your computer is powered on and not in sleep mode.

Image Flickering or Tearing

• Ensure G-SYNC Compatible is enabled in your NVIDIA control panel and the monitor's OSD.
• Check your graphics card drivers and update them to the latest version.
• Reduce the refresh rate in your display settings to see if the issue persists.

No Sound

• If using HDMI or DisplayPort, ensure the audio output is set to the monitor in your operating system's sound settings.
• Check the monitor's volume settings in the OSD.
• If using external speakers, ensure they are properly connected to the 3.5mm earphone jack and powered on.

Warranty and Support

Your ASUS ROG Strix XG27AQ monitor comes with a standard manufacturer's warranty. Please refer to the included Warranty Card for specific terms and conditions, including warranty period and coverage details.

For technical support, troubleshooting assistance, or service inquiries, please visit the official ASUS support website or contact their customer service. Keep your purchase receipt and serial number handy for faster service.

You can find more information and support resources at: ASUS Support Website