1. Introduction and Safety Information
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your PARKSIDE PTBMOD 710 Bench Drill. Please read and understand all instructions before using the tool.
1.1 General Safety Warnings
- Always wear appropriate personal protective equipment, including safety glasses, hearing protection, and gloves.
- Ensure the workpiece is securely clamped before drilling to prevent movement.
- Keep hands and loose clothing away from moving parts.
- Disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
- Do not operate the drill in damp or wet conditions.
- Ensure the work area is well-lit and free from obstructions.
1.2 Intended Use
The PARKSIDE PTBMOD 710 Bench Drill is designed for precise drilling in wood, metal, and plastic materials. It is intended for domestic and light workshop use. Do not use the tool for purposes other than those specified in this manual.
2. Product Overview
The PARKSIDE PTBMOD 710 is a powerful 710W bench drill featuring electronic speed control and a laser guide for enhanced precision. Key components include the motor unit, drill column, base plate, chuck, depth stop, and laser module.

Figure 2.1: Side view of the PARKSIDE PTBMOD 710 Bench Drill, showing the motor housing, drill column, and base.

Figure 2.2: Front view of the PARKSIDE PTBMOD 710 Bench Drill, highlighting the control panel and chuck area.

Figure 2.3: Close-up of the adjustable chuck guard, designed for user safety during operation.
2.1 Key Features:
- Powerful 710 W motor with electronic speed control.
- Electronic speed monitoring for constant speeds across various materials.
- Depth stop and zero point adjustment for consistent drilling depth.
- Integrated laser for precise workpiece positioning.
- Maximum drilling diameter: 40 mm in wood, 13 mm in steel.
3. Setup
Before initial use, ensure the bench drill is properly assembled and securely mounted to a stable workbench.
3.1 Assembly
- Carefully unpack all components and check for any damage.
- Attach the drill column to the base plate using the provided fasteners.
- Mount the motor unit onto the drill column, ensuring it slides smoothly and can be secured at the desired height.
- Securely fasten the entire assembly to a sturdy workbench using appropriate bolts or clamps (not included).
- Install the chuck guard, ensuring it can be adjusted freely.
3.2 Installing/Changing Drill Bits
- Ensure the drill is unplugged from the power source.
- Open the chuck jaws by rotating the chuck key (included) counter-clockwise.
- Insert the drill bit fully into the chuck, ensuring it is centered.
- Tighten the chuck jaws firmly by rotating the chuck key clockwise. Remove the chuck key immediately after tightening.
4. Operating Instructions
Follow these steps for safe and effective operation of your bench drill.

Figure 4.1: A user operating the PARKSIDE PTBMOD 710 Bench Drill, demonstrating proper posture and workpiece handling.
4.1 Power On/Off
- To turn on the drill, press the green 'ON' button.
- To turn off the drill, press the red 'OFF' button.
4.2 Electronic Speed Control
The electronic speed control allows you to adjust the drilling speed to suit the material and drill bit size. Use lower speeds for harder materials and larger drill bits, and higher speeds for softer materials and smaller drill bits. Adjust the speed using the control dial on the motor unit.
4.3 Using the Laser Guide
The integrated laser projects a crosshair onto the workpiece, indicating the exact drilling point. This feature aids in precise positioning without marking the material.

Figure 4.2: The laser guide projecting a crosshair onto a wooden workpiece, illustrating its precision feature.
- Activate the laser by pressing its dedicated button.
- Align the laser crosshair with your desired drilling point on the workpiece.
- Deactivate the laser when not in use to conserve power.
4.4 Setting the Depth Stop
The depth stop allows for drilling holes of consistent depth.
- Lower the drill bit until its tip just touches the workpiece.
- Adjust the depth stop mechanism to the desired drilling depth.
- Tighten the depth stop lock to secure the setting. The drill will stop at this preset depth during operation.
5. Maintenance
Regular maintenance ensures the longevity and safe operation of your bench drill.
5.1 Cleaning
- Always disconnect the power supply before cleaning.
- Use a soft, dry cloth to wipe down the exterior of the drill.
- Remove any dust or debris from the motor vents using compressed air or a soft brush.
- Clean the chuck jaws regularly to ensure proper grip on drill bits.
5.2 Storage
Store the bench drill in a clean, dry, and secure location, out of reach of children. Protect it from dust and moisture.
6. Troubleshooting
This section addresses common issues you might encounter with your bench drill.
| Problem | Possible Cause | Solution |
|---|---|---|
| Drill does not start | No power supply; Power button not pressed; Faulty switch | Check power connection; Press 'ON' button; Contact service center |
| Excessive vibration | Loose drill bit; Unbalanced workpiece; Loose mounting bolts | Tighten drill bit in chuck; Secure workpiece; Check and tighten mounting bolts |
| Inaccurate drilling | Workpiece not secured; Laser misaligned; Incorrect speed | Clamp workpiece firmly; Check laser alignment; Adjust speed according to material |
| Drill bit gets stuck | Too much pressure; Incorrect speed; Dull drill bit | Reduce feed pressure; Adjust speed; Replace or sharpen drill bit |
7. Specifications
Technical data for the PARKSIDE PTBMOD 710 Bench Drill.
| Feature | Value |
|---|---|
| Brand | PARKSIDE (PS) |
| Model | PTBMOD 710 |
| Power Source | Electric Cord |
| Motor Power | 710 W |
| Max Rotational Speed | 2600 rpm |
| Voltage | 220 Volts, 240 Volts |
| Amperage | 3.2 A |
| Max Chuck Size | 13 Millimeters |
| Max Drilling Diameter (Wood) | 40 mm |
| Max Drilling Diameter (Steel) | 13 mm |
| Color | Silver, Black, Green |
| Included Components | 1 Allen key, 1 tool key for changing drill chuck |
| Product Dimensions (LxWxH) | 67.5L x 25W x 38H Centimeters |
8. Warranty and Support
For warranty information, technical support, or spare parts, please refer to the warranty card included with your product or contact PARKSIDE customer service. Keep your proof of purchase for any warranty claims.
For further assistance, please visit the official PARKSIDE website or contact your local dealer.