Introduction
This manual provides instructions for the proper setup, use, and maintenance of your POLICE Mark 1 (VPL-688) eyewear frames. Please read this manual thoroughly before using your new frames to ensure optimal performance and longevity.
Product Overview
Figure 1: Front view of the POLICE Mark 1 VPL-688 frames.
Figure 2: Top-down view of the POLICE Mark 1 VPL-688 frames, highlighting the temple design.
Figure 3: POLICE Mark 1 VPL-688 frames worn by a user.
Setup
- Lens Insertion: Take your POLICE Mark 1 frames to a qualified optician for professional lens insertion. Attempting to insert lenses yourself may damage the frames or lenses.
- Initial Fitting: After lens insertion, have your optician adjust the frames for a comfortable and secure fit. This includes adjusting the nose pads and temple arms to prevent slipping or pressure points.
- Inspection: Before first use, inspect the frames for any signs of damage or loose components. Contact your retailer if any issues are found.
Operating Instructions
- Wearing: Always use both hands to put on and take off your frames. Grasp the frames by the temples to avoid bending or stressing the bridge and hinges.
- Handling: Avoid placing the frames face down on hard surfaces to prevent scratching the lenses. When not in use, store them in their protective case.
- Adjustments: Minor adjustments to the nose pads can be made carefully. For significant adjustments to the frame or temples, consult an optician to prevent damage.
Maintenance and Care
- Cleaning Lenses: Use a dedicated lens cleaning spray and a microfiber cloth. Avoid using paper towels, clothing, or harsh chemicals, which can scratch the lens coatings.
- Cleaning Frames: Wipe the frames gently with a soft, damp cloth. For deeper cleaning, use mild soap and lukewarm water, then rinse thoroughly and dry with a soft cloth.
- Storage: Store your frames in the provided protective case when not in use to shield them from dust, scratches, and accidental damage. Avoid leaving them in direct sunlight or extreme temperatures (e.g., in a hot car).
- Periodic Check-ups: It is recommended to have your frames professionally cleaned and adjusted by an optician every 6-12 months.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Frames feel loose or slip down. | Nose pads or temple arms require adjustment. | Visit an optician for professional adjustment. Minor nose pad adjustments can be attempted carefully. |
| Screws are loose. | Normal wear and tear. | Gently tighten with a small eyewear screwdriver. Do not overtighten. If unsure, consult an optician. |
| Discomfort or pressure points. | Improper fit or adjustment. | Return to your optician for a refitting. |
Specifications
- Model: VPL-688 0C03
- Brand: POLICE
- Material: Plastic - Metal
- Color: Matt Blue
- Lens Width: 52mm
- Bridge Width: 19mm
- Temple Arm Length: 140mm
- Department: Men's
- Item Weight: Approximately 7.2 ounces
Warranty and Support
For information regarding warranty coverage, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or service inquiries, please contact the POLICE customer service department or your authorized POLICE eyewear dealer.
Note: Warranty typically covers manufacturing defects and does not cover damage caused by misuse, accidents, or unauthorized repairs.