Introduction
This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your Yaheetech Dining Chairs. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.
Safety Information
- Ensure the chair is used appropriately, with a maximum weight capacity of 135 kg (297.6 Lb) per chair.
- Protect your floor with the plastic feet on the legs.
- Clean up spills promptly to maintain the chair's condition.
- Always follow the assembly instructions for safe installation.
- Do not stand on the chair.
- Keep children away from the assembly area.
Product Features
- Heavy-duty construction: Built with a solid structure, supporting up to 135 kg (297.6 Lb).
- Comfortable seating: Features foam-padded seat and backrest for extended comfort.
- Durable materials: Made from high-quality Plywood, PVC, PP, and sponge material.
- Floor protection: Equipped with plastic feet on legs to prevent floor scratching.
- Waterproof surface: The PU cushion surface is spill-friendly and easy to clean.
- Stylish design: Modern aesthetic suitable for various room types.
Package Contents
Your Yaheetech Dining Chairs package includes the following components for each chair:
- Chair Backrest (1)
- Chair Seat (1)
- Front Legs (2)
- Rear Legs (2)
- Hardware Pack (Bolts, Washers, Allen Wrench)
- Instruction Manual (1)
Note: The number of chairs and corresponding components will vary based on the set purchased (e.g., Set of 8).
Assembly Instructions
Assembly is required for these dining chairs. Please follow these steps carefully. It is recommended to assemble on a soft, clean surface to prevent damage.
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the "Package Contents" section are present.
- Attach Front Legs: Align the front legs with the designated holes on the underside of the chair seat. Secure them using the provided bolts and washers. Do not fully tighten yet.
- Attach Rear Legs: Similarly, attach the rear legs to the chair seat. Ensure proper alignment before securing with bolts and washers. Do not fully tighten yet.
- Attach Backrest: Connect the chair backrest to the seat frame. Secure with the remaining bolts and washers.
- Leveling and Final Tightening: Place the assembled chair on a flat, level surface. Sit on the chair to allow the legs to settle into their natural position. While seated, gradually tighten all bolts using the Allen wrench until they are secure. This step is crucial for preventing wobbling.
Usage Guidelines
These dining chairs are designed for indoor use in dining rooms, kitchens, and living room settings. Ensure the chair is placed on a stable, level surface before use. Avoid placing the chair in direct sunlight or near heat sources to prevent material degradation.
Maintenance and Care
- Cleaning: Wipe clean with a damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the PU surface or wood finish.
- Inspection: Periodically check all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain stability.
- Protection: Use coasters or placemats if placing hot items on the chair seat. Avoid dragging the chairs across the floor; lift them when moving to prevent damage to legs and floor.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles after assembly. | Bolts not fully tightened or uneven leg length. | Ensure all bolts are securely tightened. Place the chair on a level surface and sit on it to distribute weight, then tighten all bolts while seated. If wobbling persists, check if any leg pads are missing or damaged. |
| Surface damage (scratches, peeling). | Sharp objects, excessive force, or harsh cleaning agents. | Avoid using sharp objects near the chair. Clean only with a soft, damp cloth and mild soap if necessary. Do not use abrasive cleaners. |
| Difficulty assembling. | Incorrect alignment of parts or missing hardware. | Refer to the "Assembly Instructions" section and ensure all parts are correctly oriented. Verify all hardware is present. Contact customer support if parts are missing. |
Specifications
- Brand: Yaheetech
- Model Number: 364bbd97-8c7c-4093-a156-a3c4e24f4472
- Color: Dark Brown
- Material: Rubber Wood, PVC, PP & Sponge
- Product Dimensions (D x W x H): 22.5" x 18" x 36.5"
- Seat Depth: 16.5 inches
- Total Item Weight (for the set of 8): 51.6 Pounds
- Maximum Weight Capacity: 135 kg (297.6 Lb) per chair
- Frame Material Type: Composite Board, Rubberwood
- Seat Material: Foam
- Required Assembly: Yes
- Indoor/Outdoor Usage: Indoor
- Product Care Instructions: Wipe Clean
Warranty and Support
For warranty information or customer support, please refer to the documentation included with your purchase or visit the official Yaheetech website. You may also contact the seller directly for assistance with product-related inquiries.
Return Policy: 30-day easy returns are typically offered by the seller. Please check your purchase details for specific return conditions.
Seller: Yaheetech (Seller Profile)