Sekonda Model 1686 Watch Instruction Manual

Introduction

Thank you for purchasing the Sekonda Model 1686 watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.

Setup

Setting the Time and Date

1. Pull the Crown: Gently pull the crown (the small knob on the side of the watch) out to position 2 for setting the date, or position 3 for setting the time.
2. Set the Date: In position 2, turn the crown clockwise or counter-clockwise until the correct date is displayed.
3. Set the Time: In position 3, turn the crown to move the hands clockwise until the correct time is displayed. Ensure you differentiate between AM and PM if your watch has a 24-hour indicator or if setting the date.
4. Push the Crown Back: Once the time and date are set, push the crown back into position 1 (normal operating position) to start the watch.

Image: The Sekonda Model 1686 watch on a wrist, illustrating its appearance. The crown is visible on the right side of the watch case.

Adjusting the Strap

The Sekonda Model 1686 features a black leather strap with a buckle clasp. To adjust the fit, simply move the buckle pin to the desired hole on the strap. Ensure the watch is snug but comfortable on your wrist.

Image: A close-up view of the black leather strap and buckle, demonstrating the adjustment mechanism.

Operating the Watch

Timekeeping

Your Sekonda Model 1686 watch is powered by a precise quartz movement, providing accurate timekeeping. Once the time is set, the watch will operate continuously until the battery requires replacement.

Day/Date Function

The watch includes a day/date display. This feature automatically advances the day and date at midnight. If the watch has been stopped or the date needs correction, refer to the 'Setting the Time and Date' section.

Water Resistance

This watch is water-resistant up to 30 meters (3 ATM). This means it is suitable for everyday use and can withstand splashes or brief immersion in water. It is not suitable for swimming, showering, or diving. Avoid operating the crown while the watch is wet to prevent water ingress.

Maintenance

Cleaning Your Watch

To maintain the appearance of your watch, wipe the case and crystal with a soft, dry cloth. For the leather strap, avoid excessive moisture and harsh chemicals. If the strap becomes wet, allow it to air dry naturally.

Battery Replacement

The watch requires one LR44 battery. When the watch stops or the hands move erratically, it is an indication that the battery needs to be replaced. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance.

Storage

When not in use, store your watch in a cool, dry place, away from direct sunlight and extreme temperatures. The original watch box provides excellent protection.

Image: The Sekonda watch box, suitable for safe storage of your timepiece.

Troubleshooting

• Watch Not Running: Check if the crown is fully pushed in (position 1). If it is, the battery may need replacement.
• Incorrect Time/Date: Refer to the 'Setting the Time and Date' section to reset.
• Condensation Under Crystal: This indicates moisture ingress. Stop using the watch immediately and have it inspected by a professional to prevent further damage.

Specifications

Warranty and Support

Your Sekonda Model 1686 watch comes with a 2-Year Guarantee from the date of purchase, covering manufacturing defects. This guarantee does not cover normal wear and tear, accidental damage, battery replacement, or unauthorized repairs.

Image: The Sekonda Instruction Guide and 2 Year Guarantee booklet, included with your watch.

For warranty claims or technical support, please refer to the contact information provided in your guarantee booklet or visit the official Sekonda website. Please retain your proof of purchase for warranty validation.