Adalene 12 Inch Large Atomic Wall Clock Instruction Manual

Introduction

Thank you for purchasing the Adalene 12 Inch Large Atomic Wall Clock. This clock is designed for precise timekeeping, automatically synchronizing with the atomic time signal from Fort Collins, Colorado. Its vintage black frame, clear analog display, and battery-operated movement make it a versatile addition to any room, indoors or outdoors.

Safety Information

• Do not expose the clock to extreme temperatures or direct sunlight for prolonged periods.
• Avoid dropping the clock or subjecting it to strong impacts.
• Keep batteries out of reach of children. If swallowed, seek immediate medical attention.
• Dispose of used batteries responsibly according to local regulations.
• Do not attempt to disassemble or repair the clock yourself. Refer to qualified service personnel.

Package Contents

Please check the package contents to ensure all items are present:

• 1 x Adalene 12 Inch Large Atomic Wall Clock
• 1 x Instruction Manual (this document)

Note: 1 AA battery is required for operation and is not included in the package.

Product Overview

Familiarize yourself with the main components of your Adalene Atomic Wall Clock.

Figure 1: Front view of the Adalene 12 Inch Large Atomic Wall Clock, showcasing its white face, black Arabic numerals, and black metal hands within a black vintage plastic frame.

Figure 2: Back view of the Adalene 12 Inch Large Atomic Wall Clock, showing the battery compartment, time zone selector switch, and manual set buttons.

Figure 3: Diagram illustrating the 12-inch width and 12-inch height dimensions of the Adalene Atomic Wall Clock.

Key Components:

• Clock Face: White dial with clear black Arabic numerals.
• Hands: Black metal hour, minute, and second hands.
• Frame: Vintage black plastic frame.
• Glass Cover: Crystal clear glass protecting the clock face.
• Battery Compartment: Located on the back, for 1 AA battery.
• Time Zone Switch: On the back, to select your local time zone.
• Manual Set Buttons: On the back, for manual time adjustment if needed.

Setup

Follow these steps for initial setup of your atomic wall clock:

1. Install Battery: Open the battery compartment cover on the back of the clock. Insert one fresh AA battery, ensuring the correct polarity (+ and -).
2. Select Time Zone: Before the clock attempts to set itself, locate the time zone switch on the back of the clock (refer to Figure 2). Set it to your desired time zone:
   • PST: Pacific Standard Time
   • MST: Mountain Standard Time
   • CST: Central Standard Time
   • EST: Eastern Standard Time
3. Initial Synchronization: Once the battery is installed and the time zone is set, the clock hands will automatically move to the 12:00 position. The clock will then begin searching for the atomic time signal from Fort Collins, Colorado. This process can take anywhere from a few minutes to several hours, especially if the signal is weak or during daytime. For best reception, place the clock near a window, facing towards Colorado if possible.
4. Automatic Time Setting: Once the signal is received, the clock will automatically set itself to the correct time for your selected time zone, including adjusting for Daylight Saving Time (DST) automatically.
5. Manual Time Setting (Optional): If the clock does not set itself automatically after 24 hours, or if you are outside the reception range, you can manually set the time using the buttons on the back of the clock. Refer to the "Troubleshooting" section for more details on manual setting.
6. Mounting: The clock features a keyhole slot on the back for easy wall mounting. Ensure you use a sturdy screw or hook capable of supporting the clock's weight.

Operating

The Adalene Atomic Wall Clock is designed for minimal user intervention once set up.

• Automatic Time Adjustment: The clock continuously monitors the atomic time signal. It will automatically adjust for Daylight Saving Time changes and maintain accurate time without manual intervention.
• Battery Life: A single AA battery typically powers the clock for approximately one year. Replace the battery annually or when the clock hands stop moving or become erratic.

Maintenance

Proper care will ensure the longevity and performance of your clock.

• Cleaning: Wipe the clock's surface and glass cover with a soft, dry cloth. Do not use abrasive cleaners or chemical solvents, as they may damage the finish.
• Battery Replacement: When replacing the battery, always use a fresh, high-quality AA alkaline battery. Remove old batteries promptly to prevent leakage.
• Storage: If storing the clock for an extended period, remove the battery to prevent potential damage from battery leakage.

Troubleshooting

Manual Time Setting:

If automatic synchronization fails, you can manually set the time:

1. Ensure a fresh AA battery is installed.
2. Locate the manual set buttons on the back of the clock (often labeled "SET" or with arrows).
3. Press and hold the appropriate button to advance the hands until the correct time is displayed. Some models may have separate buttons for hour and minute adjustment.
4. Once the time is set, the clock will continue to operate as a standard quartz clock. It may still attempt to receive the atomic signal periodically.

Specifications

Warranty and Support

Adalene products are manufactured with quality and performance in mind. For specific warranty details and support inquiries, please refer to the warranty card included with your purchase or visit the official Adalene website. Please have your model number (218) and purchase information ready when contacting support.

For further assistance, you may also contact your retailer.