1. Introduction
This document provides comprehensive instructions for the installation, operation, and programming of your MPC Remote Starter Kit. This add-on system enhances your vehicle's convenience by allowing remote engine start using your existing factory key fobs. Please read this manual thoroughly before proceeding with installation or operation.
Image: The MPC Remote Starter Kit components, including the module and wiring harness, displayed alongside a red Ford Explorer.
2. Vehicle Compatibility
- Compatible Vehicles: Ford Explorer 2020-2024 models.
- Transmission Type: Automatic Transmission ONLY.
- Ignition Type: Push-to-Start Only. Not compatible with key-start vehicles.
- Engine Type: Gas Engine. Not compatible with Hybrid models.
Image: Visual representation of vehicle compatibility, indicating that only push-start, non-hybrid, gas engine vehicles are supported.
3. What's Included
Your MPC Remote Starter Kit includes all necessary components for installation:
- Remote Start Module
- Plug-in T-Harness wiring kit
- Installation Guide (QR code for latest information)
Image: The complete MPC Remote Start System kit, showing the product box, the main module, and the T-harness for installation.
4. Setup and Installation
This kit features a plug-in T-Harness design, significantly reducing the complexity of wiring connections. Basic knowledge of car electronics is recommended for successful installation. Refer to the provided QR code for the most up-to-date installation instructions and plug locations.
General Installation Steps:
- Access Vehicle Wiring: Locate the necessary wiring harnesses behind the dashboard, typically near the steering column or OBD-II port.
- Disconnect Factory Harness: Carefully disconnect the factory harness from the vehicle's system.
- Connect T-Harness: Connect the provided T-Harness in-line with the factory harness. Ensure all connections are secure and click into place.
- Connect Module: Plug the remote start module into the T-Harness.
- Program Module: Follow the specific programming steps outlined in your detailed installation guide (accessed via QR code) to synchronize the module with your vehicle. This typically involves a sequence of button presses and ignition cycles.
- Secure Components: Once programmed, secure the module and all wiring to prevent interference or damage.
- Reassemble: Reinstall any removed trim panels.
Image: A person connecting the T-harness into the vehicle's existing wiring system, illustrating the plug-and-play nature of the installation.
Image: A close-up view of the wiring connections during the installation process, highlighting the simplicity of the plug-in design.
5. Operating Instructions
The MPC Remote Starter Kit utilizes your vehicle's existing factory key fobs for remote start functionality. No additional remotes are required.
To Remote Start Your Vehicle:
- Ensure all vehicle doors, hood, and tailgate are closed.
- Press the LOCK button on your factory remote three (3) times in quick succession: LOCK - UNLOCK - LOCK.
- The vehicle's engine will start. The parking lights will illuminate to indicate the vehicle is running.
The remote start will run for a preset duration (typically 15 minutes) or until the vehicle is entered and the ignition is turned on.
To Turn Off Remote Start:
- Press the LOCK button on your factory remote three (3) times again: LOCK - UNLOCK - LOCK.
- Alternatively, pressing the brake pedal inside the vehicle will also turn off the remote start.
Image: An assortment of factory key fobs, demonstrating that the remote start system integrates with your vehicle's original remote.
6. Programming Features
The MPC Remote Starter Kit may offer customizable features, such as 'No Honk' remote start. Specific programming instructions for these features are detailed in the comprehensive guide accessible via the QR code provided with your kit.
Always refer to the latest digital instructions for accurate programming sequences.
7. Maintenance
The MPC Remote Starter Kit is designed for maintenance-free operation. Ensure all wiring connections remain secure and free from moisture or physical damage. Periodically check the module's mounting to ensure it is firmly in place.
8. Troubleshooting
If you encounter issues with your remote start system, consider the following:
- Remote Start Not Activating: Ensure all doors, hood, and tailgate are fully closed. Check that the vehicle is in Park. Verify your factory remote's battery is not low.
- Vehicle Not Starting: Confirm vehicle compatibility (Push-to-Start, Automatic Transmission, Gas Engine). Re-check all T-Harness connections for proper seating.
- Module Lights: Refer to your detailed installation guide for the meaning of specific LED light patterns on the module, which can indicate status or error codes.
For persistent issues, please contact MPC Technical Support.
9. Specifications
- Item Weight: 2 pounds
- Product Dimensions: 12 x 15.5 x 0.5 inches
- Item Model Number: B-4956-214
- Manufacturer: MPC Products
10. Warranty Information
The remote starters offered by MPC carry a limited lifetime warranty through the manufacturer. Physical damage or damage due to improper installation will void the manufacturer's warranty.
- First Year: Contact MPC for warranty issues. The product must be returned at the customer's expense for service.
- After First Year: Warranty issues must be handled directly through the manufacturer. A receipt from the original purchase will be required.
This warranty does not cover abuse, operation inconsistent with the product's design, or damage from environmental exposure. MPC is not liable for installation charges, loss, or damage incurred during replacement or repair of warranted products.
11. Technical Support
MPC provides technical support from Tucson, AZ, United States. Several different methods of support are available, and a QR code is included with your kit to ensure access to the most up-to-date information and resources.
Image: MPC offers free expert technical support from Monday to Friday, 9 AM to 5 PM (MST).
Image: A smartphone displaying a digital tip sheet from MPC, indicating readily available online support resources.
