IJOY Banger
Contents
iJoy Banger LED Color Changing Bluetooth Party Speaker User Manual
Model: Banger
1. Introduction
Thank you for purchasing the iJoy Banger LED Color Changing Bluetooth Party Speaker. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
2. What's in the Box
Upon unpacking, please ensure all items listed below are present and in good condition:
- Speaker
- Charging cable
- Auxiliary cable
- User manual

Front view of the iJoy Banger LED Color Changing Bluetooth Party Speaker, showcasing its dual speakers with illuminated red and orange LEDs and the central control panel.
3. Product Features
The iJoy Banger LED Color Changing Bluetooth Party Speaker is equipped with several key features designed for an enhanced user experience:
- Built-In radio to cover anything you could possibly want out of a speaker
- Lightweight design convenient to take along with you for where ever you go
- Mic Input to turn the party up to the next level
- Color changing LED to light the mood up
- Bluetooth compatible
4. Setup Guide
Follow these steps to set up your iJoy Banger LED Color Changing Bluetooth Party Speaker for first use:
- Charging: Before first use, fully charge the speaker using the provided charging cable. Connect the small end of the cable to the speaker's charging port and the USB end to a compatible USB power adapter (not included). The charging indicator light will typically turn off or change color when fully charged.
- Power On: Locate the power button, usually on the control panel, and press and hold it for a few seconds until you hear an audible prompt or see an indicator light illuminate.
- Bluetooth Pairing:
- Ensure Bluetooth is enabled on your smartphone or tablet.
- On your device, search for available Bluetooth devices. The speaker should appear as "Banger" or similar.
- Select the speaker from the list to pair. A confirmation tone or voice prompt will indicate successful pairing.
- Auxiliary Connection (Optional): If using the auxiliary cable, connect one end to the speaker's AUX input and the other end to the audio output of your external device.
- Microphone Connection (Optional): If using a microphone, insert the microphone cable into the designated MIC input port on the speaker.
5. Operating Instructions
5.1. Basic Controls
- Power Button: Press and hold to turn on/off.
- Volume Control: Rotate the volume knob or use '+' / '-' buttons to adjust volume.
- Play/Pause: Press the Play/Pause button to start or stop audio playback.
- Next/Previous Track: Use the 'Next' and 'Previous' buttons to skip tracks.
- Mode Button: Press to switch between Bluetooth, FM Radio, and AUX modes.
5.2. Bluetooth Mode
Once paired, your speaker will automatically connect to the last paired device when in Bluetooth mode. If not, manually select the speaker from your device's Bluetooth settings.
5.3. FM Radio Mode
To use the built-in FM radio:
- Press the Mode button to switch to FM Radio.
- Press the Play/Pause button to auto-scan and save available stations.
- Use the Next/Previous buttons to navigate through saved stations.
5.4. LED Color Changing Lights
The speaker features dynamic LED lights. These lights typically activate automatically when the speaker is on. Some models may have a dedicated button to cycle through light modes or turn them off.
6. Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use for extended periods.
- Water Exposure: This speaker is not waterproof. Avoid exposure to water or high humidity.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Battery is low or depleted. | Charge the speaker fully. |
| No sound. | Volume is too low; device not paired; incorrect mode. | Increase volume; re-pair Bluetooth device; ensure correct mode (Bluetooth/AUX/FM). |
| Bluetooth connection unstable. | Device too far; interference; low speaker battery. | Move device closer; avoid obstacles; charge speaker. |
| FM radio static. | Weak signal; no antenna. | Relocate speaker for better reception; ensure auxiliary cable is connected (often acts as antenna). |
8. Specifications
| Feature | Detail |
|---|---|
| Package Dimensions | 43.1 x 18.5 x 17.9 cm; 2.23 kg |
| Date First Available | 19 Oct. 2020 |
| ASIN | B08L6QXTH7 |
| Guaranteed software updates until | unknown |
| Brand | IJOY |
| Speaker maximum output power | 20 Watts |
| Connectivity technology | Bluetooth |
| Audio output mode | Stereo |
| Mounting type | Tabletop |
| Model name | Banger |
| Speaker type | Bluetooth |
| Special feature | Bluetooth |
| Recommended uses for product | Radio |
| Compatible devices | Tablet, Smartphone |
9. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official IJOY website. Keep your proof of purchase for any warranty claims.
Manufacturer: IJOY
Model: Banger
ASIN: B08L6QXTH7
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.