SAGUD SD AC-18B-SETC Airbrush Kit with Compressor User Manual

1. Introduction

This manual provides detailed instructions for the safe and effective use of your SAGUD SD AC-18B-SETC Airbrush Kit. This professional kit includes a mini air compressor and three distinct airbrushes, suitable for various applications such as model painting, nail art, cake decorating, body art, and other hobbies. Please read this manual thoroughly before operation to ensure optimal performance and longevity of your equipment.

2. Package Contents

Your SAGUD Airbrush Kit includes the following components:

• Mini Air Compressor (1/5 HP)
• SD 130 Dual-Action Airbrush (0.3mm nozzle, 1/3 oz gravity feed cup)
• SD 135 Double-Action Airbrush (0.2mm nozzle, 1/16 oz gravity feed cup)
• SD 138 Single-Action Airbrush (0.8mm nozzle, 3/4 oz siphon bottles)
• Airbrush Holder
• 6-foot Braided Air Hose (1/8 fittings)
• Quick Release Coupler with Control Valve
• 5-piece Cleaning Brush Set
• 1 Double-Ended Cleaning Brush
• 25 Droppers
• 4 Black Latex Gloves

3. Compressor Overview

The mini oil-free air compressor is designed for portability, low noise operation, and consistent performance. It features an auto-stop function at 58 PSI (4 Bar) and auto-start at 40 PSI (2.8 Bar). The recommended working pressure ranges from 18 PSI to 30 PSI, making it suitable for airbrush guns with nozzle sizes between 0.2 mm and 1.0 mm.

Note: The air compressor (motor) will shut off when the air pressure reaches 58 PSI (4 Bar) and restart when the pressure drops below 40 PSI (2.8 Bar). If the compressor does not start, release some air pressure to initiate operation.

Important: The voltage of this compressor is 110V/60Hz. Please confirm that this voltage and plug type are compatible with your country's electrical standards before use. This compressor is not designed for use in 220-240V/50Hz regions.

4. Airbrush Specifications

The kit includes three professional airbrushes, each designed for specific applications:

• SD 130 Dual-Action Airbrush: Features a 0.3mm nozzle and a 1/3 oz gravity feed fluid cup. Ideal for general purpose spraying and fine detail work.
• SD 135 Double-Action Airbrush: Equipped with a 0.2mm nozzle and a 1/16 oz gravity feed fluid cup. Best suited for very fine lines and intricate details.
• SD 138 Single-Action Airbrush: Comes with a 0.8mm nozzle and 3/4 oz siphon bottles. Excellent for broader coverage and larger projects.

5. Setup Instructions

Follow these steps to set up your airbrush kit:

1. Place the air compressor on a stable, level surface.
2. Connect one end of the braided air hose to the air outlet on the compressor. Ensure a secure connection.
3. Attach the quick release coupler to the other end of the air hose.
4. Connect your chosen airbrush to the quick release coupler.
5. If using the airbrush holder, attach it to the compressor as shown in the video below.
6. Plug the compressor into a compatible power outlet (110V/60Hz).

6. Operating Instructions

6.1 Adjusting Air Pressure

The compressor's air pressure can be adjusted using the regulator knob. Lift the knob to unlock it, then turn it clockwise to increase pressure or counter-clockwise to decrease pressure. Push the knob down to lock the setting.

6.2 Filling and Spraying

Prepare your paint by diluting it to the appropriate consistency for airbrushing. Use the provided droppers to fill the airbrush fluid cup or siphon bottle. Ensure the paint is not too thick, as this can cause clogging. If the paint does not spray out, dilute it further.

6.3 Changing Airbrush Nozzles

To change the airbrush nozzle, carefully unscrew the existing nozzle and replace it with the desired size. Refer to the video below for a visual guide.

7. Applications

The SAGUD Airbrush Kit is versatile and can be used for a wide range of creative projects. Here are some examples:

• Model Painting
• Automotive Graphics
• Nail Art
• Crafts
• Temporary Tattoos
• Cake Decorating
• Body Art

8. Maintenance

Proper cleaning and maintenance are crucial for the longevity and performance of your airbrush kit. Always clean your airbrushes thoroughly after each use to prevent paint from drying and clogging the nozzles.

• Use the provided cleaning brushes and double-ended brush to clean the fluid cups, nozzles, and internal components of the airbrushes.
• Flush the airbrush with appropriate cleaning solution or water until all paint residue is removed.
• Disassemble the airbrush components as needed for deep cleaning, paying close attention to the nozzle and needle.
• Ensure all parts are dry before reassembling and storing the airbrushes.

9. Specifications

10. Support

Each SAGUD product undergoes a thorough inspection to ensure it arrives in good working condition. Should you encounter any issues or have questions regarding your airbrush kit, please contact our customer support for a prompt resolution.