Introduction
Image: The JALL Analog Alarm Clock in Skyblue, presented from a slight angle.
Thank you for choosing the JALL Analog Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
Product Overview
The JALL Analog Alarm Clock is designed for simplicity and reliability. Key features include a silent, non-ticking sweep second hand, a loud alarm, and a soft night light function. Its compact size makes it suitable for various settings.
Key Features:
- Silent Operation: The sweep second hand moves continuously without producing any ticking noise, ensuring a quiet environment.
- Loud Alarm: An effective alarm designed to wake users, capable of sounding for up to 30 minutes.
- Night Light: A soft, yellow light illuminates the clock dial when activated, providing visibility in the dark while being gentle on the eyes.
- Battery Operated: Requires one AA battery for all functions.
- Durable Design: Constructed from high-quality materials for reliable performance.
Image: The JALL Analog Alarm Clock positioned near a sleeping baby, visually representing its silent, non-ticking operation.
Components:
Refer to the image below for an illustration of the clock's components and controls located on the back panel.
Image: Rear view of the JALL Analog Alarm Clock, highlighting and labeling its various controls and features, including the Light button, Set Time knob, Alarm Speaker, Battery Compartment, Battery Cover, Alarm ON/OFF switch, and Set Alarm knob.
- Light Button: Press to activate the night light.
- Set Time Knob: Rotate to adjust the current time displayed by the hour and minute hands.
- Alarm Speaker: The component from which the alarm sound is emitted.
- Battery Compartment: The housing for the AA battery.
- Battery Cover: A removable cover that secures the battery within its compartment.
- Alarm ON/OFF Switch: A toggle switch to enable or disable the alarm function.
- Set Alarm Knob: Rotate to adjust the position of the alarm hand to the desired alarm time.
Setup
1. Battery Installation
- Locate the battery compartment on the back of the clock.
- Remove the battery cover by sliding or lifting it off.
- Insert one AA battery (not included), ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Replace the battery cover securely.
Image: The JALL Analog Alarm Clock on a surface, with an overlay indicating the battery compartment and the requirement for a single AA battery.
2. Setting the Current Time
- Locate the Set Time Knob on the back of the clock.
- Rotate this knob clockwise or counter-clockwise until the hour and minute hands display the correct current time.
Operating Instructions
Setting the Alarm
- Locate the Set Alarm Knob on the back of the clock.
- Rotate this knob to move the alarm hand to your desired alarm time.
- To activate the alarm, slide the Alarm ON/OFF Switch to the "ON" position.
- To deactivate the alarm, slide the Alarm ON/OFF Switch to the "OFF" position.
Using the Night Light
- In low-light conditions, press and hold the Light Button on the back of the clock.
- The clock face will illuminate with a soft, yellow light.
- Release the button to turn off the light.
Image: The JALL Analog Alarm Clock in a dimly lit setting, showcasing its warm night light illuminating the clock face. An inset highlights the night light button on the clock's rear.
Maintenance
Cleaning
- Wipe the clock with a soft, dry cloth.
- Do not use abrasive cleaners, chemical sprays, or solvents, as these may damage the clock's finish or internal components.
Battery Replacement
- When the clock hands begin to move slowly, or the alarm sound weakens, it indicates that the battery needs replacement.
- Follow the battery installation steps outlined in the "Setup" section.
- Dispose of used batteries responsibly according to local environmental regulations.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock is not running or running slowly. | The AA battery is depleted or incorrectly installed. | Replace the AA battery, ensuring correct polarity (+ and -) alignment. |
| Alarm does not sound. | The alarm function is not activated, the alarm time is incorrectly set, or the battery is low. | Ensure the Alarm ON/OFF Switch is in the "ON" position. Verify the alarm hand is accurately set to the desired wake-up time. Check and replace the battery if necessary. |
| Night light is not working. | The battery is low or depleted. | Replace the AA battery. |
| Clock makes a ticking noise. | This model is designed with a silent, non-ticking sweep second hand. A ticking noise indicates a potential malfunction. | Contact JALL customer support for further assistance. |
Specifications
| Feature | Detail |
|---|---|
| Brand | JALL |
| Model | B08L4VPXGT |
| Display Type | Analog |
| Special Features | Alarm, Loud Alarm, Silent Clock, Night Light |
| Power Source | Battery Powered (1 x AA battery, not included) |
| Product Dimensions | 4.25"W x 4.5"H (approximately 10.8 cm W x 11.4 cm H) |
| Item Weight | 8.6 ounces (approximately 244 grams) |
| Frame Material | Acrylonitrile Butadiene Styrene |
| Color | Skyblue |
| Indoor/Outdoor Usage | Indoor |
Image: The JALL Analog Alarm Clock displayed with its approximate width (4.25 inches) and height (4.5 inches) dimensions.
Warranty and Support
JALL offers a 365-Day Warranty on products sold on Amazon. This warranty covers manufacturing defects and ensures product reliability. For any questions, concerns, or support needs regarding your JALL Analog Alarm Clock, please contact JALL customer service through the Amazon platform or visit the official JALL store page for more information.
JALL Store: Visit the JALL Store on Amazon
