Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your RealTruck UnderCover Elite LX One-Piece Truck Bed Tonneau Cover. The Elite LX is designed to offer superior protection and a refined appearance for your truck bed. It features a carpet-lined underside, a color-matched paint finish, and integrated accessories for enhanced convenience.
Image: RealTruck UnderCover Elite LX Tonneau Cover on a Ford F-150.
Key Features
- Factory Painted: The Elite LX is painted to match your truck's factory color using Axalta waterborne paint for a high-quality finish.
- Carpet Headliner: A premium carpet headliner provides a finished look and feel to the underside of the cover, offering additional protection for your cargo.
- Integrated Handle: Features an easy-to-use integrated handle for smooth opening and closing, designed for a streamlined, original equipment (OE) appearance.
- Cargo Retriever: Includes a Cargo Retriever tool to help access items at the front of the truck bed, which conveniently stores within the cover.
- LED Lighting System: A super bright LED lighting system is installed towards the rear of the cover, offering versatile lighting options with its removable design, hook, magnet, and built-in feet.
Image: Carpet-lined underside of the tonneau cover.
Image: Integrated handle and lock.
Truck Bed Compatibility and Measurement
Accurate measurement of your truck bed is essential to ensure proper fitment of the UnderCover Elite LX Tonneau Cover. This cover is specifically designed for 2021 - 2025 Ford F-150 models with a 5' 7" (67.1") bed.
To measure your truck bed, open the tailgate and use a tape measure to determine the length of the bed floor from the bulkhead (front wall of the bed) to the inside edge of the tailgate. Round your measurement to the nearest inch. For example, a measurement of 67.1 inches should be rounded to 67 inches, which corresponds to a 5' 7" bed.
Video: Official RealTruck guide on how to accurately measure your truck bed for proper accessory fitment.
Image: Visual guide for measuring your Ford F-150 truck bed.
Installation Guide
The UnderCover Elite LX Tonneau Cover is designed for a straightforward installation. While a detailed installation guide is included with your product, here are the general steps and components:
Included Components:
- UnderCover Elite LX Tonneau Cover
- Hardware Kit
- Installation Guide
For optimal results and to ensure proper sealing and functionality, it is recommended to follow the included installation guide precisely. Professional installation is also an option for those who prefer it.
Image: Two people installing the tonneau cover.
Image: Tonneau cover mounting hardware.
Operation
Operating your UnderCover Elite LX Tonneau Cover is designed for ease of use:
- Opening and Closing: Use the integrated handle to unlock and lift the cover. Gas struts assist in opening and holding the cover in the open position. To close, gently pull the cover down until it latches securely.
- Cargo Retriever: The included Cargo Retriever can be extended to reach items near the cab. When not in use, it stores neatly within the cover.
- LED Light: The removable LED light provides illumination for your truck bed. It can be slid out, hung using its hook, attached with its magnet, or stood on its built-in feet for versatile lighting.
Image: Tonneau cover in open position, showing access to the truck bed.
Care and Maintenance
To maintain the appearance and functionality of your Elite LX Tonneau Cover, follow these care guidelines:
- Cleaning: Wash the cover regularly with mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the paint finish.
- Waxing: Apply a high-quality automotive wax periodically to protect the painted surface and maintain its shine.
- Hardware Check: Periodically inspect all mounting hardware and latches to ensure they are secure and functioning correctly. Tighten any loose fasteners as needed.
- Seals: Check the weather seals around the perimeter of the cover for any signs of wear or damage. Replace seals if necessary to maintain water resistance.
Troubleshooting
If you encounter any issues with your UnderCover Elite LX Tonneau Cover, consider the following common solutions:
- Difficulty Latching: Ensure the cover is properly aligned on the truck bed rails. Check for any obstructions that might prevent the latches from engaging fully.
- Water Leaks: Verify that all weather seals are correctly seated and free from debris. Inspect the drain tubes (if applicable) for blockages.
- Stiff Operation: Lubricate hinges and moving parts with a silicone-based lubricant if the cover feels stiff when opening or closing.
- Loose Fit: Re-check the tension of the mounting clamps or hardware. Refer to the installation guide for proper torque specifications.
For persistent issues or concerns not addressed here, please contact RealTruck customer support.
Product Specifications
| Specification | Detail |
|---|---|
| Brand | RealTruck |
| Model Number | UC2208L-HX |
| Fits Vehicle | 2021 - 2025 Ford F-150 (5' 7" Bed / 67.1") |
| Exterior Finish | Painted (Color-matched to HX - Antimatter Blue) |
| Material | Aluminum, Vinyl |
| Lock Type | Tailgate |
| Item Weight | 105 Pounds |
| UPC | 840114303075 |
Warranty and Customer Support
The UnderCover Elite LX Tonneau Cover comes with a comprehensive warranty:
- Lifetime Guarantee: On paint and structure.
- 1-Year Guarantee: On parts and hardware.
This product is proudly made in the USA with globally sourced materials and is backed by a dedicated US-based customer support team. For any questions, assistance, or warranty claims, please contact RealTruck customer service.
Image: Proudly assembled in Missouri.
