1. Introduction
Welcome to the Maxxus Venice Elite 2-Person Ultra Low EMF FAR Infrared Sauna. This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your new sauna. Please read this manual thoroughly before initial use and retain it for future reference.
The Maxxus Venice Elite sauna is designed to provide a relaxing and therapeutic experience using FAR infrared technology. It features reforested Canadian Hemlock wood construction and energy-efficient heating panels, ensuring a quality product that heats efficiently and uses less energy.

Figure 1.1: The Maxxus Venice Elite 2-Person Ultra Low EMF FAR Infrared Sauna, showcasing its elegant design and wooden finish.
2. Safety Information
Your safety is paramount. Please adhere to the following safety guidelines to prevent injury or damage to the sauna.
- Consult with a physician before using the sauna, especially if you have pre-existing medical conditions, are pregnant, or are taking medication.
- Do not use the sauna if you are under the influence of alcohol or drugs.
- Stay hydrated by drinking water before, during, and after sauna sessions.
- Limit sauna sessions to recommended durations (typically 15-30 minutes) to avoid overheating.
- Do not block the ventilation openings or place any objects on the heating panels.
- Ensure the sauna is connected to a properly grounded electrical outlet. Do not use extension cords.
- Keep children and pets away from the sauna during operation.
- Do not attempt to modify or repair the sauna yourself. Contact qualified service personnel for assistance.
- Avoid spilling water or other liquids directly onto the heating elements or electrical components.
3. Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, contact Maxxus Saunas customer support immediately.
- Front Panel with Door
- Back Panel with Heaters
- Left Side Panel with Heaters
- Right Side Panel with Heaters
- Roof Panel with Lighting and Control Unit Wiring
- Floor Panel
- Bench Seat
- Bench Support
- Control Panel (pre-installed on front panel)
- Hardware Kit (screws, clips, etc.)
- User Manual (this document)

Figure 3.1: The Maxxus Venice Elite Sauna with its glass door open, revealing the interior bench and heating panels.
4. Setup and Assembly
Assembly typically requires two adults and can be completed in approximately 1-2 hours. Ensure you have adequate space and a level surface for installation.
- Prepare the Location: Choose a dry, level indoor location with access to a dedicated 120V/15A grounded electrical outlet. Ensure sufficient clearance around the sauna for assembly and ventilation.
- Install Floor Panel: Place the floor panel in the desired location.
- Assemble Side and Back Panels: Connect the back panel to the floor panel, then attach the side panels. Ensure all locking clips or latches are securely fastened.
- Install Front Panel: Attach the front panel, aligning it with the side panels and securing all connections.
- Install Bench and Support: Place the bench support inside the sauna, then position the bench seat on top.
- Install Roof Panel: Carefully place the roof panel on top of the assembled walls. Connect all electrical wires from the walls and control panel to the corresponding connectors on the roof panel. Ensure all connections are firm.
- Connect Heaters: Verify all heater connections are secure.
- Final Inspection: Double-check all connections, ensure the door closes properly, and clean any dust or debris from the interior.

Figure 4.1: An interior view of the Maxxus Venice Elite Sauna, showing the carbon infrared heating panels on the back wall and the wooden bench.
5. Operating Instructions
Familiarize yourself with the control panel to operate your sauna effectively.

Figure 5.1: The digital control panel for the Maxxus Venice Elite Sauna, featuring temperature, time, light, and power controls.
5.1 Power On/Off
- Press the POWER button (usually a green circle with a line) to turn the sauna on or off.
- The display will illuminate when powered on.
5.2 Setting Temperature
- The temperature display shows the current internal temperature.
- Use the TEMPERATURE UP (▲) and TEMPERATURE DOWN (▼) arrows to adjust the desired temperature.
- The sauna operates up to 140°F (60°C). The ideal operating range is between 118°F and 135°F (48°C and 57°C).
- Press the °F/°C button to switch between Fahrenheit and Celsius.
5.3 Setting Time
- The time display shows the remaining session time.
- Use the TIME UP (▲) and TIME DOWN (▼) arrows to set your desired session duration.
- The sauna will automatically shut off once the set time expires.
5.4 Lighting Controls
- Press the EXTERIOR LIGHT button to control the external lighting.
- Press the READING LIGHT button to control the internal reading light.
- The sauna features interior chromotherapy lighting. Use the dedicated button (if present on your model, often integrated with the reading light or a separate control) to cycle through different colors or modes.

Figure 5.2: An example of chromotherapy lighting, showing various color options that can enhance your sauna experience.
5.5 Audio System (if applicable)
- Some models include an MP3 AUX input for connecting external audio devices.
- Locate the MP3 AUX INPUT port, typically on the interior or exterior of the sauna.
- Connect your audio device using a standard 3.5mm audio cable.
- Adjust volume from your connected device.

Figure 5.3: Close-up of the MP3 AUX Input port, allowing connection of external audio devices.
6. Maintenance
Proper maintenance will ensure the longevity and optimal performance of your Maxxus sauna.
- Cleaning: Wipe down the interior and exterior wood surfaces with a clean, damp cloth after each use. Do not use harsh chemical cleaners, as they can damage the wood or leave residues.
- Wood Care: The Canadian Hemlock wood is naturally resistant to warping and cracking. Avoid excessive moisture. If desired, you may lightly sand any rough spots that develop over time. Do not apply stains or sealants to the interior wood.
- Heater Care: The carbon infrared heating panels require minimal maintenance. Do not touch the panels during operation. Ensure they are free from dust and obstructions.
- Ventilation: Ensure the sauna is placed in a well-ventilated area to prevent moisture buildup.
- Storage: If storing the sauna for an extended period, ensure it is clean, dry, and stored in a climate-controlled environment.
7. Troubleshooting
Refer to this section for common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Sauna does not power on. | No power to outlet; loose power cord; tripped circuit breaker. | Check power outlet with another device; ensure power cord is securely plugged in; reset circuit breaker. |
| Sauna not heating. | Temperature set too low; heaters not connected properly; faulty heater. | Increase set temperature; check all heater connections (refer to assembly); contact customer support if heaters are suspected faulty. |
| Temperature not reaching set point. | Ambient room temperature too low; door not fully closed; excessive air leakage. | Ensure room temperature is adequate; check door seal and ensure it is fully closed; inspect panels for gaps. |
| Control panel not responding. | Loose wiring connection; temporary electronic glitch. | Turn off and unplug the sauna for 5 minutes, then plug back in and restart. Check wiring connections to the control panel. |
If the problem persists after attempting these solutions, please contact Maxxus Saunas customer support for further assistance.
8. Specifications
Key technical specifications for the Maxxus Venice Elite 2-Person Infrared Sauna:
- Capacity: 2 Person
- Overall Dimensions: 48 inches (W) x 42 inches (D) x 75 inches (H)
- Wood Type: Natural reforested Canadian Hemlock wood construction
- Heaters: 6 infrared carbon ultra low EMF energy efficient heating panels
- EMF Level: Under 3MG when sitting 6 to 8 inches from the heating panels
- Operating Temperature: Up to 140°F (60°C), ideal between 118°F to 135°F (48°C to 57°C)
- Lighting: Interior chromotherapy lighting, exterior light, reading light
- Power Requirement: 120V / 15A (dedicated circuit recommended)
- ASIN: B08L44N7TB
- Manufacturer: Golden Designs Inc (NA)

Figure 8.1: A detailed view of a carbon infrared heating panel, designed for efficient and low EMF heat distribution.
9. Warranty and Support
Maxxus Saunas stands behind the quality of its products. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Maxxus Saunas website.
For technical support, parts, or warranty claims, please contact Maxxus Saunas customer service:
- Manufacturer: Golden Designs Inc (NA)
- Website: www.goldendesignsinc.com
- Contact Information: Please refer to the manufacturer's website or your purchase documentation for the most current contact details.
When contacting support, please have your product model (Venice Elite) and ASIN (B08L44N7TB) ready.